Question about Panasonic KX-TCD580 Cordless Phone (KXTCD580EM)

1 Answer

Hard reset of KX-TCD580 Base

I have a Panasonic KX-TCD580(ES) Base Unit, and am not using the my the handset which came with it, because it crackles too much. I stupidly deregistered the handset, and have now registered 6 other handsets, how do I reset the base manually so that I can administrate the base with the handset which came with it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers
Re: Hard reset of KX-TCD580 Base

Go to this link; and input "KXTCD580" in the search box - after a few disclaimer screens you get to the manual for your phone. page 29 details reset for the handset Page 32 details base unit reset Page 48/49 details cancelling handsets to the base Hope this helps, please post again if you are still having problems with your phone :)

Posted on Apr 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Have a Panasonic KX-TG1061C with 3 handsets. Handsets work perfectly. None of corded base unit buttons work.

to turn off night mode
do not think night mode would cause your problem.
check dialing mode #120
When you unplugged the base unit did you pull out the ac adapter for about 30 seconds to reset the base unit ?

Jan 04, 2015 | Panasonic Phones


Fixing the handset link to base unit of Panasonic KX-TG4500

After the base unit died I was able to restore power by switching out the power adapter of one of the handsets with the one on the base unit. However, when the power was restored to the base, none of the handsets that previously worked were getting a dial tone. I could only use the phone from the base unit. To fix the handsets I first reset the base unit by pressing the reset button with the tip of a pen on the bottom of the base phone then momentarily removed and reinstall the battery on each of the handsets to allow each to reset individually. In doing so, I got the dial tone back on all previously linked handsets without having to reregister them.

on Mar 23, 2010 | Phones

2 Answers

How can i register my hanset. it says error.

Please use the below link to assist you with handset registration.

May 06, 2014 | Panasonic KX-TGA560 Cordless Expansion...

1 Answer

Want to register an additional handset for panasonic kx-tga9341t

You need to contact Panasonic's customer service.

May 01, 2012 | Panasonic Phones

2 Answers

Panasonic KX TG9331 no link to base Even standing next to the base, I cannot answer the call. Sometimes repeated pressing of the talk button lets me talk. Also, switching to speaker phone sometimes drops...

Sounds like a defective handset or base unit. Unplug the base unit from power and the telephone jack. Leave unplugged for 1 minute, this sometimes helps the phone to reset from a problem. Unplug the battery from the handset and plug back in after a minute also to help reset. Place your handset in the base unit for about 1 minute to allow the handset to link up with the base unit. If this doesn't work you may have a defective phone. Contact Panasonic support for further information if this does not work.

Aug 29, 2009 | Panasonic KX-TG9331T Cordless Phone

1 Answer


Hi! This may cure your problem!
Re-registering the handset
If “No link to base. Move closer
to base, try again.
” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
LMake sure the base unit is not being
LHave the handset and base unit near
each other when re-registering the
LKX-TG5422 and KX-TG5423 only:
Confirm the extension number of the
handset which has lost its link to the
base by placing the handset on the base
unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 KX-TG5421 base unit:
Press and hold {HANDSET
} until the CHARGE
indicator flashes.
KX-TG5422 base unit:
Press and hold the handset locator
button that corresponds to the handset
you want to re-register ({HANDSET
1} or {HANDSET
2}) until the CHARGE
indicator flashes.

Below is a link that will take you to the instruction manual for your phone.

Hope this helps! Hal

Feb 27, 2009 | Panasonic KX-TG5422M Cordless Phone

1 Answer

Sync a new handset to kx-tg5632 phone

This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
3 Handset:
Press {OK}, then wait until a beep
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Dec 29, 2008 | Panasonic KX-TG5632 Phone

1 Answer

Kx-tg1100 registration to anoter base

sorry, it seems that they have to come from the same model base. however, the procedure to reset handset numbers for the 1100 may work for you. there is a 15 digit number on the base unit. try to type that into the 1100 and see if that will register the 1100 to your old base.

Dec 12, 2008 | Panasonic KX-TG1100 Cordless Phone

6 Answers

DeRegistering a Damaged Cordless Phone???!!!!

I have a Panasonic KX-TG6700 base unit and KX-TGA670B handsets. We had a similar problem where we were no longer able to deregister the handset using the handset itself. We wanted to be able to use that slot that the broken phone was still occupyng. The solution that we found in the manual online was to hold down the intercom button for 3 seconds until the "in use" light turned on. Then press and hold the number of the extension you want to deregister until it beeps. At this point the base unit has freed that extension.

Nov 05, 2007 | Panasonic KX-TGA600B Cordless Expansion...

1 Answer

Panasonic KX-TG2740 Cordless Phone - Can I reset handset registration

press function button on handset, scroll to initial setting, select by pressing right arrow, scroll to registration, select, select hs registration, follow directions on handset display, pressing mute on "new" base station, and ok on handset(plugged in). If you like, you can unregister with the "old" base unit first.

Oct 18, 2007 | Panasonic KX-TG2740 Cordless Phone

Not finding what you are looking for?
Panasonic KX-TCD580 Cordless Phone (KXTCD580EM) Logo

1,702 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts


Level 3 Expert

94267 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides