Question about Whirlpool Cabrio WTW6600SBT Top Load Washer

1 Answer

F1 error code

Does anyone know how to fix this? I get F1 error in the start and in the middle of the cycle, have to stand there and push cancel and start button about 15 time before it will finally start the load. Any help would be great. Thanks, Litisha I have the same f1 problem. I have to press cancel several times to override it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

The F1 error code indicates a primary control failure or pressure signal out of range. Once the pressure hose & air dome have passed testing, the control board will need replaced. Good Luck And Please Rate FixYa!

Posted on Dec 20, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: F1 error code

Did anyone find a fix for the F-1 code problem?

Posted on Oct 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does an F-1 code mean on the display? washer will not start.


power problem

  • Whirlpool Fault Codes - AppliancePartsPros.com www.appliancepartspros.com > Appliance Repair Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0
  • Washer Diagnostic& Repair - F1 Error Code power supply ... www.youtube.com/watch?v=BAVS9mI3JLQ
    • BY APPLIANCEVIDEO.COM
    • 4 MIN
    • 65K VIEWS
    2014-02-07 · Troubleshoot your trusty Whirlpool Top Load Washer that has these following symptoms: F1 Error Code At: http://www.appliancevideo.com To ...
  • Whirlpool Cabrio f1 error and how to fix it https://whirlpoolcabriof1error.wordpress.com Control board W10189966 will work with the Whirlpool model numbers listed at the bottom of this page. These models include the Maytag Bravos and Kenmore Oasis.
  • whirlpool F1 code - Appliance Repair Forum forum.appliancepartspros.com > ... > Washer Repair
    • 68 POSTS
    • FIRST POST: 2008-07-28
    2009-09-29 · Discuss whirlpool F1 code in Washer Repair. "whirlpool cabrio washing machine displays f1 code. have already pushed cancel and restart to no avail.
  • Cabrio Washer by Whirlpool F1 Error Code - Facebook www.facebook.com/CabrioWasherByWhirlpoolF1ErrorCode Cabrio Washer by Whirlpool F1 Error Code. 793 likes. Got the F1 Error Code? Tell your story! Share ALL your issues with this washer to warn others...
  • Whirlpool Fault Codes - Appliance Help Online appliancehelponline.com/whirlpool.html Whirlpool Range / Stove / Oven Fault Codes: Failure Code: Fault Code Description: Solution: 4 Digit Failure Codes (for 2 digit codes see below) F1 - E0

  • May 04, 2016 | Whirlpool WTW8200YW Cabrio Top Load Washer

    1 Answer

    Kenmore Oasis Elite Model #110.27086601. When I push start, a F1 code will appear. Then I will push stop and then start again. Sometimes I need to do this two or three times for the washer to start. ...


    Hi Sandra:
    You have a bad control board, the F1 is the error for the bad board; what you need to do is remove the three screws at the back of the control panel and tilt the panel forward. The main control card is there. Unplug and re-seat all the connectors. Reassemble the unit and try it. If you still get the F1 error code then the controll card is toast.

    What happens is these connections come loose. If they arc acrost the contacts then that is what fries the board. Most people that know about this fix are lucky and the unit starts to work right again. Some arnt so lucky.

    If you are one of the lucky ones place a healthy dab or two of hot melt glue stick on each connector to hold them from working loose again.

    Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

    Thank you for using Fixya, and have a nice day.

    Dec 10, 2011 | Kenmore Washing Machines

    1 Answer

    Kenmore Oasis Elite Model #110.27086601. When I push start, a F1 code will appear. Then I will push stop and then start again. Sometimes I need to do this two or three times for the washer to start. ...


    You have a bad control board, the F1 is the error for the bad board; what you need to do is remove the three screws at the back of the control panel and tilt the panel forward. The main control card is there. Unplug and re-seat all the connectors. Reassemble the unit and try it. If you still get the F1 error code then the controll card is toast.

    What happens is these connections come loose. If they arc acrost the contacts then that is what fries the board. Most people that know about this fix are lucky and the unit starts to work right again. Some arnt so lucky.

    If you are one of the lucky ones place a healthy dab or two of hot melt glue stick on each connector to hold them from working loose again.

    Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

    Thank you for using Fixya, and have a nice day.

    Dec 10, 2011 | Kenmore Washing Machines

    1 Answer

    F1 error appears just right after I turned the machine.. I had to stop and tstart 3-4 times before it gets on to cycle. Then at 23 minutes F! error error comes back and I had to do the same thing (stop and...


    The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced .

    Aug 28, 2011 | Kenmore Washing Machines

    1 Answer

    I hit cancel in the middle of a cycle and now it keeps saying F1


    From the maytag website: 

    To remove the error display, press Power/Cancel or Pause/Cancel twice.

    If Power/Cancel or Pause/Cancel does not work:
    Unplug washer or disconnect power for one minute.
    Plug in washer or reconnect power.
    Re-select the cycle and press Start/Pause.
    NOTE: If the error remains on the display, call for service.

    Sep 24, 2009 | Maytag EPIC MFW9700S Front Load Washer

    10 Answers

    Maytag bravos top load washer error code F1


    Well, you're not gonna like this, but here's the deal.

    Remove the three screws on the rear of the control panel and lift it up. Disconnect the rubber hose on the right side of the gray control module and blow through it to make sure it is clear and not kinked. If this check is fine then your control module needs replaced.

    Note that Maytag knows this is a fairly common problem. My washer failed 9 months out of warranty with this problem.

    The only good news is that it is an easy, though expensive, replacement.

    Oct 23, 2008 | Washing Machines

    5 Answers

    F1 error code


    Did anyone find a fix for the F-1 code problem?

    Jul 22, 2008 | Whirlpool Cabrio WTW6600SBT Top Load...

    1 Answer

    Error codes


    I own a HE3 kenmore elite for 4 years now and the troubleshooting codes are: SUD When excessive suds are detected, a suds routine automatically starts. This causes the cycle to go longer to remove the excess suds. Reduce detergent amounts or use HE detergent. The F02 error I had with mine and it is a drain problem. Book says check the hose for kinks, clogged or is it more than 96 inches above the floor. On mine it was the fan pump on the forward motor that drains the washer. It was worn and not pushing out the water fast enough. You will hear a high pitched whine at the front bottom of the washer if this is bad. To reset the washer from the F02 error, select pause/cancel twice to cancel the cycle. Unplug washer or dissconnect power. good luck

    Jul 07, 2007 | Kenmore 46462 Front Load Washer

    4 Answers

    Kenmore Ecocycle Front Loading Washers ERR ??? LOC???


    Try to fix it by unplugging the unit for few hours and then plug it back in. Good luck !

    Jun 20, 2007 | Fisher and Paykel Fisher Paykel Intuitive...

    Not finding what you are looking for?
    Whirlpool Cabrio WTW6600SBT Top Load Washer Logo

    309 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Mike Cairns
    Mike Cairns

    Level 3 Expert

    3053 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...