Question about Dacor EHD3618SS Kitchen Hood

1 Answer

How do you take out light ballbs from dacor hod fan

How do you take out light balbs from dacor hod fan

Posted by on

  • janton_ronal Mar 13, 2009

    how to remove and replace light bulbs in dacor hood

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

To replace the light bulb:
1. Remove the right filter and turn off the main power
switch.
2. Gently push the suction cup on the light replacement
tool A (provided with you range hood)
onto the lens of the light bulb B .
3. Turn the tool counter-clockwise until the bulb
comes loose.
4. Remove the tool from the bulb and put it on the
lens of the replacement bulb.
5. Screw the new bulb into the light fixture clockwise
until it is tight. Turn on power at the fuse or junction
box. Turn on the main power switch and touch
the light key to make sure it is working.
6. Replace the filter.
You can download the manual here.

Good Luck And please Rate FixYa!

Posted on Dec 20, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Exhaust fan and lights do not work


see this steps and fix it. God bless you
Switch If the range vent hood fan and light are not working the switch might be defective. Watch our video on switch testing and test this switch for continuity.

Selector Switch If the range vent hood fan and light are not working the selector switch might be defective. Watch our video on switch testing and test this switch for continuity.

Rotary Switch If the range vent hood fan and light are not working the rotary switch might be defective. Watch our video on switch testing and test this switch for continuity.

Rocker Switch If the range vent hood fan and light are not working the rocker switch might be defective. Watch our video on switch testing and test this switch for continuity.

Switch Kit If the range vent hood fan and light are not working the switch kit might be defective. Watch our video on switch testing and test this switch for continuity.

Micro Switch If the range vent hood fan and light are not working the micro switch might not have continuity. The best way to test the switch is with an Ohm meter. See our switch testing videos for help testing this micro switch.

Thermal Fuse If the range vent hood fan and light are not working the thermal fuse may have blown. It can be tested for continuity. Watch our fuse testing video for more information.

Main Control Board If the range vent hood fan and light are not working the main control board may be defective.

User Control and Display Board If the range vent hood fan and light are not working the user control and display board may be defective. Check other causes before ordering this board.

Oct 02, 2012 | Dacor Millennia DHI602 Kitchen Hood

1 Answer

Can't replace light bulb for dacor hood it's 4 yrs old


did you try to remove the filters to get to the bulbs?

Jan 23, 2011 | Dacor EHD3618SS Kitchen Hood

1 Answer

How yo wire up ceiling fan with light


Typically with only one switch controlling the fan/light the connections in the ceiling are white to white, black to black and blue. if you have a separate switch for the light and one for the fan, typically the wiring is white to white, black to black, red to blue.

Mar 07, 2010 | Dacor Remote Light Control for Ventilation...

1 Answer

The halogen light in a Dacor Range hood won't budge. Any suggestions how to get it out? Suction cup won't turn it.


Using your finger nail or a small flat-head screwdriver, gently depress lens retainer tabs. good luck

Dec 31, 2009 | Dacor EHD3618SS Kitchen Hood

1 Answer

How do you get the light bulb out of a dacor hood?


Using your finger nail or a small flat-head screwdriver, gently depress lens retainer tabs.

Nov 26, 2009 | Dacor EHD3618SS Kitchen Hood

1 Answer

Monogram hood problem


Fuse or wiring

Oct 21, 2009 | Range Hoods

1 Answer

The fan buttons on prv36s ventilation unit do not activate with a gentle touch any more. What can be done to correct this?


It's hard to say. It depends what caused the problem. If the cause is simple wear then replacing the control unit is really the only thing you can do. However if moisture, grease or grime has managed to get in and around the contacts under the buttons then cleaning would help. The problem is that the only way to clean that area is to disassemble the control unit. So your going to have ask your self just how annoying it is. If it's becoming unusable then it should be replaced. So you really have nothing to loss by attempting to clean it. It really depends on your level of comfort with taking things apart.
I would also get in touch with Dacor and explain the problem. It's possible your problem might not be uncommon and they may have something in place to deal with it. Below is the link to there home page.
Good luck.

http://www.dacor.com/

Sep 04, 2009 | Dacor Prefrence PRV36 Stainless Steel...

1 Answer

How do you change the dacor hod fan light balbs


Using your finger nail or a small flat-head screwdriver, gently depress lens retainer tabs. and take the balbs out...

Dec 19, 2008 | Dacor EHD3618SS Kitchen Hood

2 Answers

Dacor downdraft vent


Call Dacor at 800 793 0093. They'll tell you who has the part.

Dec 03, 2007 | Dacor RV36SS Kitchen Hood

Not finding what you are looking for?
Dacor EHD3618SS Kitchen Hood Logo

1,849 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Range Hoods Experts

swDemonDog

Level 2 Expert

233 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Todd B

Level 3 Expert

571 Answers

Are you a Dacor Range Hood Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...