Question about Radio Communications
Bought a a4tech comfortFit stereo headset dont know how to use for voice chat?
SOURCE: premium usb headset
Hi, A couple of things you can check first pls: 1. the logitech headset has its own mute control somewhere along the line/volume control. pls check/try it on both settings; 2. since it is USB connected, it is now a secondary audio device in your hardware aside from the onboard audio device in your computer. That gives you now 2 speaker output and 2 mic inputs. It is possible that voice recognition uses the logitech therefore it works but voice chat uses the onboard audio and since no mic is connected at the rear of your computer (I am presuming), you may have to set the voice chat to use the logitech mike also. I hope this gives you some idea and works for you. Pls post agin how things are or if you still need further assistance. Good luck and kind regards.
Posted on Aug 03, 2007
Go to Control Panel>Sound, Speech & Audio Devices>Sounds and Audio Devices. Switch to the Audio tab and make sure your headset device is set to the Sound Playback, Default device. You can use Sound Recorder to make sure the mic works and the headset itself.
Posted on Jul 17, 2009
Go to control panel click on sounds audio dvices then tab on voice and click on test hardware then click on next now there are two options one is recorder and second is playback. Now click again on next when you click on next both volume should be enable then click on next and then finish. Now 100% guaranteed it will work and you can voice chat now. Cheers!
Posted on Aug 01, 2009
Tips for a great answer:
Feb 23, 2010 | Voyetra Turtle Beach Ear Force X1 Headset
Feb 06, 2010 | Samsung WEP460 Bluetooth Headset
Dec 05, 2009 | Plantronics Audio 345 Headset
Aug 01, 2009 | Logitech 250 Headset
Jul 17, 2009 | Logitech ClearChat Stereo Headset Headset
May 17, 2008 | Logitech Internet Chat Consumer Headset
Aug 03, 2007 | Logitech 980374-0403 Consumer Headset
370 people viewed this question
Usually answered in minutes!