Question about Samsung CXD1334 13 in. Combo

5 Answers

The word "factory: appears on the screen constantly. The model is CXD1334.

Posted by on

  • maxvipond Feb 24, 2009

    The word "factory" appears in the center of the screen constantly. The first solution from this site is to unplug the set for 10 minutes. That did not work. Any other answers?

×

5 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 250 Answers

Did you try my suggestion? Turn TV On ....While Factory Test Is Flashing On The Screen, Press Erase On The Remote. TV Will Turn Off By Itself. Leave Off For A Few Minutes & Turn Back On.how > to get into the service menu, . With power off, > press Mute-1-8-2-Power On.please do rate the session if helped.thanks.

Posted on Feb 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 19,396 Answers

That means that the factory test as starting.

To end factory test Press Erase button on your remote.
The TV should turn off by itself. Leave TV off for a couple of minutes and Turn the TV back on.

If Factory test keeps coming back then either the remote, or the TV button pad is faulty.
Try removing batteries from remote to understand if it is the remote.

Try also unplugging power cord for few minutes.

If nothing work, call repairs, as that is probably a faulty keypad or IR receiver on TV.

Posted on Feb 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 165 Answers

Press the buttons randomly as something is got pressed asccidently.due to this your unit blocked in factory settings.or calling the service center of the company is much necessary.as they deal with what factory setting they have setted for your model of tv.

Posted on Feb 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 4,806 Answers

Hi there.
I think the TV is still set to demo mode (this is usually for in store)
you should have an option to take it out of demo mode with the remote control.

Good luck and thanks for using Fixya!!

Posted on Feb 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 326 Answers

Unplug the unit completely for ten minutes then reconnect every thing properly and reset it.as it will work properly.

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO reset model SVF15215CXB


Sony factory reset
You can recover your VAIO computer from the recovery area on the built-in
storage device. This recovery method is faster than using Recovery Media.
See
1. Press the ASSIST button while your VAIO computer is off.
The VAIO Care (Rescue Mode) screen appears.
2. Select Start troubleshooting (recovery).
Follow the on-screen instructions until the Choose an option screen appears.
3. Select Troubleshoot and VAIO recovery solutions.
Follow the on-screen instructions until the VAIO Care (Rescue Mode): VAIO
recovery solutions screen appears.
4. Select Start recovery wizard.
5. Follow the on-screen instructions
To perform custom recovery, select Tools and Start advanced recovery wizard.
This is a quote from the manual.
Th

Jul 09, 2014 | Sony Computers & Internet

1 Answer

I have a PANIMAGE media tablet 7'' 2GB/GO, model numberR79RT2W5.. it turns on and thats it, it shows a constant blue line centered at the bottom of the screen, i can press the menu button on the top of the...


You'll need to do a factory reset:
1. With the device off, press and hold Volume Up and Power.
2. Release the Power button when you see the logo, but continue to hold Volume Up until the recovery screen appears.
3. Use the Volume buttons to navigate the menu and select wipe data / factory reset. Press Home to choose the selection.
4. Press Volume Up continue.

This will reset you device to factory settings, however anything on your SD card will still remain.
At this point you will need to start fresh as if you just bought the device -- register with your email address, etc.

Oct 26, 2013 | Generic PanImage Android MM Tablet eReader...

1 Answer

Clearing the bios password


When you first turn your computer on, you are briefly presented with a BIOS "splash" screen. Somewhere on this screen (just where depends on the manufacturer), are instructions on how to access BIOS settings. Generally, this requires tapping a function key, say F2, while the splash screen is visible. Make note of which key the splash screen says to press to access the BIOS and restart your computer.
When the computer boots and the splash screen appears, tap the required function key quickly to enter the BIOS settings screen. You will only have a couple of seconds to hit the right key and if you miss it you'll have to restart the computer and try it again.
Once you successfully enter the BIOS settings screen, use the arrow and function keys to navigate the menus. Keep an eye out for an option that says something akin to "reset to factory defaults." If you see this, follow the on-screen instructions to reset the BIOS to the factory settings. Then, confirm your choice and exit the BIOS screen, usually by pressing escape. Congratulations, you are done.
If your BIOS does not have an option to return to factory settings, things are more difficult. Because the BIOS is stored in ROM, it must have a constant power supply to store any changes you make to it, otherwise it would reset every time you disconnected your laptop from AC power. Removing power to the BIOS resets it to factory settings and involves disconnecting a small battery attached to the motherboard. On many laptops, the BIOS battery is easily accessible through a door on the bottom of the unit. Unplug the computer, remove the main battery and touch something metal to ground yourself.
Remove any screws holding the BIOS battery door in place. Then identify the battery, (it is generally a small lithium "watch" battery), and remove it taking care not to damage any surrounding circuitry. Let the computer rest for a minute or two to discharge any remaining power, and replace the battery.
If your laptop does not have an easily accessible door for the BIOS battery, you may have to dive deeper and disassemble the computer to find it. Consult your laptop manufacturer's website for information on replacing or removing the BIOS battery from your model.


  • 2 When the computer boots and the splash screen appears, tap the required function key quickly to enter the BIOS settings screen. You will only have a couple of seconds to hit the right key and if you miss it you'll have to restart the computer and try it again.
  • 3 Once you successfully enter the BIOS settings screen, use the arrow and function keys to navigate the menus. Keep an eye out for an option that says something akin to "reset to factory defaults." If you see this, follow the on-screen instructions to reset the BIOS to the factory settings. Then, confirm your choice and exit the BIOS screen, usually by pressing escape. Congratulations, you are done.
  • 4 If your BIOS does not have an option to return to factory settings, things are more difficult. Because the BIOS is stored in ROM, it must have a constant power supply to store any changes you make to it, otherwise it would reset every time you disconnected your laptop from AC power. Removing power to the BIOS resets it to factory settings and involves disconnecting a small battery attached to the motherboard. On many laptops, the BIOS battery is easily accessible through a door on the bottom of the unit. Unplug the computer, remove the main battery and touch something metal to ground yourself.
  • 5 Remove any screws holding the BIOS battery door in place. Then identify the battery, (it is generally a small lithium "watch" battery), and remove it taking care not to damage any surrounding circuitry. Let the computer rest for a minute or two to discharge any remaining power, and replace the battery.
  • 6 If your laptop does not have an easily accessible door for the BIOS battery, you may have to dive deeper and disassemble the computer to find it. Consult your laptop manufacturer's website for information on replacing or removing the BIOS battery from your model.

  • Read more: How to Reset the BIOS on a Laptop ' eHow.com http://www.ehow.com/how_4740583_reset-bios-laptop.html#ixzz1YX2FMmVc

    Sep 20, 2011 | HP Pavilion ze5375us Notebook

    1 Answer

    A green volume control line has appeared overlaid at bottom of screen. control panel to left of keypad no longer works.volume is constantly on full. how do i remove it.


    At this point I would suggest you a full factory reset. You can restore the computer back to factory default,to do so, follow the below steps:

    Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction. NOTE: This will erase all the datas on the computer.

    Jun 26, 2010 | Acer Aspire 6920 Notebook PC

    1 Answer

    Garmin nuvi 760 ...updating bluetooth firmware


    You have a software problem with your NUVI . I recommend you to reset [ restoring default factory settings ] your NUVI

    To reset your NUVI , please follow one of these procedures :

    1:Turn the Nuvi on.

    2:Touch the tools icon on the main screen. The tools icon is represented by a wrench surrounded by a blue circle.


    3:Touch the "Settings" icon which appears as a wrench.

    4:Push the "Restore" button at the bottom of the screen. A confirmation message will appear asking to confirm restoring the Nuvi to factory settings. Push yes to restore the factory settings
    ............................................................................................
    Try this for hard reset .

    Turn off Garmin device. Press down on bottom right corner of the touchscreen [ Don't let go ] , and then power on the GPS unit. You should be prompted whether do you really want to erase all user data, or asked if do you really want to start up in maintenance mode. Press “Yes” to reset (warning: all data will be erased and lost, so backup before proceeding) or enter maintenance mode.

    After that you can try again with updating .

    PLEASE DON'T FORGET TO RATE !

    Apr 20, 2010 | Garmin Nuvi 760 Car GPS Receiver

    2 Answers

    Samsung SGH-L770 mobile keeps re-starting before os starts up


    Have you tried a Factory Reset ( Master Reset) should do the trick

    Mar 23, 2009 | Cell Phones

    1 Answer

    Reboot laptop


    it depends on the make and model of the machine to restore the machine back to factory.

    Apr 19, 2008 | Computers & Internet

    1 Answer

    "Factory" on display


    Lets just buy her a new one. blv

    Dec 18, 2007 | Samsung CXD1334 13 in. Combo

    Not finding what you are looking for?
    Samsung CXD1334 13 in. Combo Logo

    Related Topics:

    127 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Samsung Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    71736 Answers

    Henry  Thomas
    Henry Thomas

    Level 3 Expert

    1074 Answers

    Jerry Greenberg
    Jerry Greenberg

    Level 3 Expert

    1646 Answers

    Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...