Question about ViewSonic N3735W 37 in. LCD TV

4 Answers

Remote code I have a viewsonic flatscreen TV and need a code in order to use my dishnetwork DVR Remote. Tried all remote codes listed in Viewsonic and dish web sites ,also talked to support for both cannot get my dish remote code that will work my lcd I connot program the cable remote to use on the tv. Non of the codes listed will work.

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem with a Viewsonic N3735W LCD TV and Comcast Customer DVR 3 Device remote. I contacted Viewsonic and they gave me 11454 which works.

Posted on Jul 29, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a viewsonic model# vsii859-1m .serial# nx2232w.i dont have a remote for it. but need the code for my sony remote to run it.so what is the code for the Remote code.

Posted on Mar 07, 2009

  • Solrac2258 Feb 19, 2011

    I also had that same problem with a Rogers' digital cable box remote. I took " tonyk462 " solution and modified it. Because the remote accepts 4 digits and 5 were given I chose the last 4 numbers 1454 and that did the trick... hope this helps.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 231 Answers

Try Phillips Remote Codes

10054 is the code for directv remotes. It seem to work.

Posted on Dec 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I struggled with the same problem for my viewsonic 37" LCD. No remote code works with it. I solved my problem by getting a Universal remote control with Learning function. The learning remote can store the codes from your viewsonic remote and also store the codes from your Dish DVR Remote. You can program each button as desired and finally have one remote for the TV and Dish. I have now put my Viewsonic remote and my Dish DVR remote in the drawer and I am using the universal remote flawlessly. Finally! The remote I use is called "One for All" but several others also have the learning function. Hope this helps!

Posted on Dec 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the code for quantum fx remember 115 remote for a viewsonic tv


0281,0288. Check these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

Apr 26, 2015 | ViewSonic Televison & Video

1 Answer

My 4.4 dish network remote codes listed for viewsonic hdtv do not work,I have tried:507,551,562,566,575,583,600,752,760,796 ( 606would not program into remote)


Hi there TonyMichael, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you and provide you with information that can help program your remote to your television. The codes we have listed for a Viewsonic Tv to be programmed with a 4.4 IR/UHF Pro remote are: 566, 505, and 760.
I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at kimberly.escobar@dish.com!

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.


Kimberly. Escobar
Social Media Representative
DISH L.L.C

Oct 11, 2013 | ViewSonic N2630w 26 in. LCD TV

1 Answer

Need remote code


If you have the ViewSonic remote that came with your TV, the codes are in it. If you have some other remote, possibly universal, it will be necessary for us to know the brand of remote in order to provide the code

Aug 04, 2013 | ViewSonic N3735W 37 in. LCD TV

1 Answer

I have a Viewsonic N2060w-1M TV but I don't have a remote. How to I program a universal remote control - Jenses -to work with my Viewsonic?


For the remote codes, Viewsonic does not have any since the universal remote comes furnished with a code book from the "MAKER" of that Universal Remote. I have heard that the Philips TV brand codes for universal remotes work on quite a few series' of Viewsonic TV's, so try those from your code book.

May 30, 2010 | ViewSonic N2060w 20 in. LCD Television

1 Answer

Code needed, Viewsonic 3751w & Comcast remote


these are for the viewsonic with the comcast DTA remote.
11755, 10724, 10775, 10797, 10857, 10864, 10885, 11330, 11342, 11578, 11627, 11742, 12014
0240

Sep 08, 2009 | ViewSonic Televison & Video

1 Answer

Codes for viewsonic TV remote


Yes you can purchase the remote from Viewsonic Online Parts Store or I have seen them for sale at remotes.com and that 3rd party store gives a 1 yr. warranty unlike VS 90 day warranty on the remote. As for the remote codes, Viewsonic does not have any since the universal remote comes furnished with a code book from the "MAKER" of that Universal Remote. I have heard that the Philips TV brand codes for universal remotes work on quite a few series' of Viewsonic TV's, so try those from your code book.

Jul 13, 2009 | One For All URC-4605 Remote Control

1 Answer

DishNetwork Remote won't program to control ilo EDTV


Hi, Hope this helps. I used code 720 for my dish remote to remote my ilo tv. It works great. Hope it works for you. Bob

Jan 11, 2009 | iLO 2600 Television

1 Answer

Remote code


Have you tried the website of DISHNETWORK.COM yet?

Jul 23, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Codes


No codes available. Get a separate remote to control your cable box.
Viewsonic has issues.

Jun 28, 2008 | ViewSonic N3250W Television

1 Answer

Remote controle code


There are some codes for Viewsonic tv's but apparently it's really hard to program and the codes even change. I read somewhere once that the best way to program it is to try with those really expensive remotes that can program everything, but you will need to contact viewsonic for the software to upload to that remote.

Dec 16, 2007 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
ViewSonic N3735W 37 in. LCD TV Logo

2,466 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

5185 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...