Question about Metra Antennaworks 44-UA205

Open Question

How to install the Metra 44-ua205 antenna

I just bought the Metra 44-UA205 slim style antenna.
Does anyone have an idea how to install?
No pictures or instructions.
I'm his aunt.....

Posted by on

1 Suggested Answer

iadame
  • 676 Answers

SOURCE: Need Replacement Mast for Metra 44-PW22 Power Antenna

the online site for metra is www.metraonline.com The part number for the replacement mast is 44-PW22. Hope this site will help you find a dealer in your area. If you need more help, please ask.

Posted on May 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

PIONEER AVH-P4000DVD 6.1" LCD 2-DIN CD/MP3/DVD IPOD NEW


Where are you located, if not the United States?

Aug 05, 2008 | Pioneer DEH-P690UB CD Player

1 Answer

How do you install a pioneer deh-2200ub into a 1995 Chevrolet berretta?


You will need these parts from Metra Electronics :
99-3200 Dash kit.
In the instructions that come with this, it tells how to R&R the dash.
https://metradealer.com/files/products/INST99-3200.pdf

Either a 40-GM10 or 40-GM12 Antenna Adapter

and a 70-1858 Wire Harness. This wire harness plugs into your factory harness and then you can use **** connectors to match up the other side to the radio. Red to Red, Yellow to Yellow...etc on down the line. Radio mounts into dash kit and screws into dash.

Nov 26, 2010 | Pioneer DEH2200UB with iPod Direct Control...

1 Answer

What do i need to install after market cd player in my 2004 GMC Sierra?


The sad part about installing into alot of GM cars is that the Harness is about $100 bucks

You need a Metra GMOS-01

You need a metra 40-GM30 ( Antenna adapter, since the stock plug wont plug into after market radio)

And a Metra 99-2003 ( dash kit

Apr 06, 2010 | Pioneer DEH-P2900MP CD Receiver...

1 Answer

NEED INSTALL KIT FOR 1993 CHEV. PICKUP.


1993 S 10 Chev. Pickup

Wire harness Metra 70-1858
Kit 02-4544
Antenna adapter 40-GM10

Jan 30, 2010 | Pioneer DEH-P4700MP CD Player

1 Answer

Need Replacement Mast for Metra 44-PW22 Power Antenna


the online site for metra is www.metraonline.com The part number for the replacement mast is 44-PW22. Hope this site will help you find a dealer in your area. If you need more help, please ask.

May 18, 2009 | Metra Antennaworks 44-PW64

1 Answer

No AM radio?


Try pressing down on the directional pad located on the right side of the stereo, this should bring you to the AM setting. If that doesn't work, make sure you have the proper antenna cable installed as well as the proper wiring harness.

Feb 10, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

How to wire antenna for 1998 nissan maxima


kevinrose: are you installing a factory antenna or an aftermarket?
The factory antenna will get a constant power supply which is a pink or purple wire. This wire is hot whether the key is on or off.
The way the antenna is made to go up, is through a second power source which is black/red wire. When you turn the radio on, this wire goes hot when the ignition is switched in the accessory or on positions. When you turn the radio off or turn the ignition switch completely off, the antenna will completely retract. The circuit for the antenna is served with a 10 amp fuse which is located on the driver's side to the left of the steering column, The fuses should be labeled on the door you remove to access the panel.
CAUTION!!!! most aftermarket antennas DO NOT have the kind of connector that will all you to plug or easily connect the factory antenna cable to it. You wil have to make an adaptor.
So before taking things out of the packaging check this out or you will find your self with an antenna to sell.

sandman: Depending on the situation you are describing is the solution This is contingent on your having removed the old antenna and it's remains. Ideally you and one other person to assist would be best for this job. Have the radio turned on and feed the antenna mast cable in with the teeth facing the rear of the car. Push the cable down until it stops. At that point be prepared to feed the cable in as the motor draws it downward and be prepared to feed the mast it self into the antenna housing where it will continue to rectract until it stops nearly flush with the fender . At the time it stops, you will hear it going bump, bump, bump a number of times. This is normal. Once retracted, you can reinstall the retaining nut or collar which prevents the antenna from being pushed out of the housing. The collar has two small holes in the top which are for a special tool. A pair of snap ring pliers will work in their place.
If you have the remains of the antenna cable inside of the antenna assembly, unless you are somewhat skilled, it may be better to remove the antenna assembly and bring it to a shop for the to replace the mast.
If I can be of further assistance....let me know.

Jan 12, 2008 | Metra Antennaworks 44-PW64

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Metra Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Metra Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...