Question about Kensington Gravis Blackhawk Digital (10171) Joystick

1 Answer

Gravis digital joystick does not match my computer ports

Joystick given to me by my sister. Probably bought 9 to 10 years ago. I have a computer with XP and the gameport is 15 holes in three lines and the joystick is two rowa with a total of 15 prongs. Is there an adapter I can purchase? I have tried at Best Buys and other computer stores without any luck.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Http://ftp.gravis.com/public/pcstick/gravisxperience/Xp4.5_FTP.exe

Gameport is usually on sound card or usb to gameport adapter.

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having issues setting up the PS4 can't find the hdmi slot same size as the hdmi wire that comes with the console. Hdmi wire and tv shown in pic


  • Connect the included HDMI cable to your TV and the PS4's HDMI Out port Connect your console to your cable or satellite box Unplug the existing HDMI cable connecting your cable or satellite box to the TV and plug it into the PS4's HDMI In port Plug the PS4 into a power source Power on the PS4 Plug the controller into the PS4 using the included Micro USB cable Press the PS button on the controller to pair it with your PS4

Jan 10, 2017 | The Video Game Consoles & Games

1 Answer

Im over 50 years old. I don't understand a lot about my tablet. I only use it to email my daughter & play games. What is Router settings? Please


A router is the box that connects you to your broadband. The Tablet is possibly asking you to allow it to connect to your broadband, probably by the Wifi settings. And of course it can't connect. So you will have to access your broadband Router settings to allow it.

Jan 09, 2017 | Video Game Consoles & Games

1 Answer

What's happen to my ps 3? have error d5027


That error basically means your network connection to the PS3 network servers is unstable. Given the time of year and the number of kids that have snow days and are at home, and parents staying home working across the internet, the most likely cause is simple network congestion. You should notice this issue go away early morning when fewer people are online, and get worse as the day progresses. In some cases, you can set up a VPN or Virtual Private Network connection that can help. If you want to try that, go to this link http://community.us.playstation.com/t5/PlayStation-Home-Support/Using-Virtual-Private-Network-VPN-To-Defeat-Network-Error-D50027/td-p/44868077 for instructions on setting it up.

Jan 08, 2015 | Video Game Consoles & Games

6 Answers

How do i turn on my ps3 rock candy wireless controller


After installing batteries in the controller and inserting the usb stick into your PS3, hold down the home button (the round middle most button with a house on it) for a few seconds until the light on the controller illuminates. This is your indicator your controller is paired with your PS3 and should be assignable and usable at this point.

Apr 08, 2013 | Video Game Consoles & Games

2 Answers

Serial number for fifa manager 11 saying its invalid


I've also had this, I think since they have brought out Fifa Manager 13 or planned to they seem to have dumped all the serial authorisation codes at solidshield for fifa manager 11 or something - currently in the process of trying to get it sorted with EA online help - which I'd suggest you try through the EA website but expect a long delay in answering. So far all they have done is given me the digital version of the product - which wasn't what I was having difficulty with, Origin recognises the product code it is Solidshield which fails to authorise. Still awaiting further response from EA help (5 days of owning a game I can't play so far and have only received a 15% Origin discount off older games.) Brilliant...

Sep 19, 2012 | FIFA Manager 2011 [UK IMPORT]

1 Answer

Nes displays solid blue screen after i installed new 72 pin connector


Try cleaning the game packs out with qutips and rubbing alcohol too and the game port is dirty too try cleaning the game port out with compressed air cans.

Jul 23, 2012 | Nintendo NES Console

10 Answers

PS3 cant go online with Belkin N1 wireless router


I have exactly the same issue as some of you above. As soon as I start my PS3 I manage to log onto the network for anywhere between 2 seconds and 2 minutes before I get the dreaded 80710102 error and have to reboot the PS3 to reconnect. I wrote to Belkin tech support and got the following reply... I Haven't tried it yet so don't know if it really works but thought I'd post it up here in case it helps anyone else out...

Hi Antony,

Thank you for contacting Belkin Technical Support.

We understand that the router does not support PS3. We apologize for the inconvenience caused.

A) To isolate the problem, please follow the steps given below to update the firmware and configure the router:

We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.

Please download only the relevant firmware on the router from the link given below. The firmware file would be according to the router version:

http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8635uk4A&aid=14489&scid=0

and save it to the computer.

- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.

Please follow the steps given below for configuring the router:

- Disconnect the computer from your Modem provided by your "Internet Service Provider" (ISP) if it is connected to the computer.

- Reset the router to "Factory Defaults". The reset button is found at the back of the router. The reset procedure is,

- Unplug the power cable and then plug it back again. Wait for 5 seconds.
- Locate the reset button (inside a hole) at the back of the router.
- Hold down the reset button till the power-light turns solid, and then release it.

- Connect the router to either the telephone line or the filter.

- Connect the computer to port number 1 of the router.

- Make sure the corresponding lights are lit. The telephone light should be ON and solid.

- Make sure your computer has a valid IP address by following the steps given below.

1. Click on “Start” -> “Run” -> and type “CMD” and click “OK”.
2. Type “ipconfig” in the black window and check the IP address.
3. It should be in the range of 192.168.2.x, where “x” ranges from 2 to 254.

- If it is not a valid IP Address, please assign a static IP address, "Subnet Mask", “Default Gateway" and "DNS Addresses" in the computer by referring to the link below.

http://web.belkin.com/support/kb/kb.asp?a=2824

- Please reset the Internet Explorer browser settings by following the steps below.

- Open Internet Explorer. Click on “Tools” -> “Internet Options”.
- Under the General tab, click on “Delete Files” under “Temporary
Internet Files” and select "Delete all Offline content" box.
- Click on “Clear History”.
- Under the Connections tab, select “Never Dial a Connection” and
click on “LAN settings”. Uncheck all the options and click on “OK”.
- Under the Advanced tab, click on “Restore Defaults”.
- Click on “Apply” and then “OK”.

- Log on to router setup page by typing “192.168.2.1” in the address bar of the browser. By default the password is blank.

- On the left under “Internet WAN”, click on the option "Connection Type".

- Select “PPPOA”, (If it is ADSL)/ PPPOE (If it is DSL) and click on “next”.

- Type in the user-name and password and then re-type the password given to you by your ISP. Make sure you type in the full user-name.
For Example, the format for the User-name should be "yourusername@yourISP.com or .net"

- Also confirm the settings of “VPI/VCI”, “Encapsulation” values from your Internet Service Provider (ISP) and configure the same.

- Change the “MTU” to “1400”.

- Click on “Apply Changes” button at the bottom. Wait till it saves the data.

- Click on Home on the right top corner and then click on the "Connect" button. You should be able to go online.

B) Configuration of PS3:

Please contact Sony and assign static IP address and DNS on the PS3. The static IP address should be assigned in the range of the router. For example: 192.168.2.200. The IP address you assign should not be used by any other device on the network. Please confirm the ports to be opened for the PS3 from Sony.

1) Please follow the instructions given below to forward the port numbers for PS3 on the router:

- Please open the Internet Explorer and in the address bar type in "192.168.2.1" and "Enter". The computer should be connected to the router with an ethernet cable.
- Leave the password blank and click on "submit".
- Click on "Virtual server" under the "Firewall".
- Enter the port number under "Inbound port" & "Private port".
- Enter the Static IP address of the PS3 under the "Private IP address".
- Check the "Enable" box and click on "Apply changes".

2) Please follow the instructions given below to enable UpnP on the router:

- Log on to the router web interface at http://192.168.2.1
- By default, the password is blank.
- Click on System setting under "Utilities".
- Against the heading "UPNP Enabling", choose "Enable".
- Click on "Apply changes".

Note: The NAT feature on the router is enabled by default.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or Static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”. Please confirm if the router is F5D8635?
4. Using the router, if the connection is stable on all the wired and wireless computers?
5. If the PS3 works fine with other networks?
6. When does the error come up? If it comes up for both, CAT5 and CAT6 cables?

Dec 06, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Kensington Gravis Blackhawk Digital (10171) Joystick Logo

Related Topics:

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kensington Video Game Consoles & Games Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

yadayada
yadayada

Level 3 Expert

66744 Answers

Brad Brown

Level 3 Expert

14420 Answers

Are you a Kensington Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...