Question about Check Point Network Adapter

2 Answers

Bunker hill digital safe

Anyone know how to program a different code into a bunker hill digital safe? #45891 I bought a used one and have the key but don't know how to put in a new PIN

Posted by on

  • flobrenna Mar 09, 2009

    HOW DO I PUT NEW PIN IN 45981

  • sbmg1
    sbmg1 Aug 30, 2012

    Hold on to that key!!! It is the only way to truly get into the safe. . If your batteries die, the key is the only way to open the safe to change the batteries.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

CHANGING CODE ON MODEL # 45891:
On the inside of the door toward the hinge, you will see a small red button. Press this button until the yellow light on the front control panel lights up. Now you can imput the new code (1 to 8 digits) into the front control panel, followed by either the "A" or "B" key. The safe will beep twice (2 times) to confirm the code has been changed. Important: If the safe beeps 3 times, then the code has not been accepted and you must repeat the above steps.
DO NOT LET THE BATTERIES RUN OUT BECAUSE YOU WILL NOT BE ABLE TO OPEN THE SAFE OR CHANGE BATTERIES.

Posted on Aug 30, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Button on inside of door

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is bunker hill safe 45891 fire & water proof


Per the manual, the safe is not fireproof. I will also guess that it is not waterproof, based upon the construction of the safe.

Sep 23, 2014 | Network & Wireless Adapters

1 Answer

How do i get into my bunker hills digital floor safe 45891 when i have lost the combo and the keys?


Try banging on the top of safe with hand, rubber hammer, regular hammer with board on safe to spread the energy, etc. while turning the knob at the same time. Sounds silly but worked for me. Sellingdj......

Jun 16, 2014 | Check Point Network Adapter

1 Answer

I have a bunker hill safe #93575, the battery is getting low. is there any thing i need to know about changing the batterys


Change batteries ASAP because if your batteries die you will be unable to get into the safe without the key. The batteries are located inside the safe. If you can't open the safe, you can't replace the batteries!!!

There are NO replacement keys available for model #45891. We've tried. I would NOT buy this safe again for these reasons.!!!

Nov 08, 2011 | Check Point Network Adapter

1 Answer

Bunker hill safe model no.45891 bought used, can't open. any ideas?


Safe has Key lock hidden on it? Contact Harbor Freight with serial number, to try and get new key. Once opened follow these instructions at:

http://www.harborfreight.com/manuals/93000-93999/93575.pdf

Oct 20, 2009 | Check Point Network Adapter

3 Answers

I have a model 45891 Bunker Digital Safe. Battery


how do i change combination on bunker hill 45891 safe, i have tried every way i can think of.

Oct 05, 2009 | Check Point Network Adapter

1 Answer

I bought a safe from a garage sale and cant poen it


I know Harbor Freight sells some of their products and you can download the users guide from their website it should help you get it working. Good Luck with it!

Aug 06, 2009 | Check Point Network Adapter

1 Answer

Are all bunker hill safe keys the same?


Never!.............sodeep (unless you happen to be the lucky one in a million)

May 16, 2009 | Check Point Network Adapter

6 Answers

Cannot get my Bunker Hill Safe open.


get the key number that is listed above the key hole and then call 888-299-3427 for a replacement

Nov 21, 2008 | Check Point Network Adapter

3 Answers

Changing digital combanation on safe


Manual for bunkerhill safe , how to program and specs:

http://www.harborfreight.com/manuals/93000-93999/93575.pdf

No Known default combination.. Sorry!

Nov 14, 2008 | Check Point Network Adapter

7 Answers

Bunker hill safe


i had the same problem this is what i did. i took the lil leg off the bottem it held on by a srew take a cloths hanger put it in the hole and now u can hit the lil button that is for makin a new code it is on the hing side of the door the yellow light will come on and stay on now put ur new code in then hit a or b i used 1111a then changed it once i got in o by the way ''the factory code is 159a try this first" and the cloths hanger i shoved a ear plug on the end of it so that way it could grip the button hope this helps somebody

Sep 20, 2008 | Check Point Network Adapter

Not finding what you are looking for?
Check Point Network Adapter Logo

1,484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Check Point Network & Wireless Adapters Experts

steve morris
steve morris

Level 3 Expert

1673 Answers

Laxman Bisht
Laxman Bisht

Level 3 Expert

656 Answers

ray gallant

Level 3 Expert

36226 Answers

Are you a Check Point Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...