Question about Frigidaire FWS833A Top Load Washer

2 Answers

Whirlpool filling and washing, not draining, rinsing or spinning

My Whirlpool CleanTouch will fill with water, will agitate, sounds as if it wants to start draining and stops, the dial keeps moving as though its going through the cycle but it doesn't rinse or spin out. I can move the dial back around to spin cycle and it will spin, but then I have to move back around to rinse and spin again. What is wrong with this thing?

Posted by on

  • Anonymous Mar 16, 2014

    The cycles stop and do not restart unless you manually move the dial, and then it wont go to rinse.

  • Anonymous Mar 20, 2014

    wash cycle works fine, will not go to rinse

×

Ad

2 Answers

Replace Your Drain Pump Assembly

Posted on Oct 10, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Check out your outlet filter, probable it is clogged. Clean this out and refit. Most cases when the drain or spin does not work, it is the filter. This is a suggestion.

Posted on Sep 04, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 5 year old Roper washing machine fills up, washes/agitates the cloths, drains them when the washer get to the rinse line to start the rinse cycle it stops, and all I hear is a humming. The machine will...


I'm not familiar with roper washing machines so I'll ask the question does it have two fill hoses. Most European machines now only have one fill. If it has two then it sound like the machine takes the initial water from the one fill and the rinse cycle water from another. The humming sounds like the valve for the other fill needs replacing. These are quite inexpensive and easy to fit. Power off.. remove lid ....switch of water...take out valve when you establish which one is affected and replace

Oct 17, 2013 | Whirlpool WTW5700S

1 Answer

Whirlpool washer model lsr8233eqo


So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

Feb 03, 2013 | Whirlpool Washing Machines

1 Answer

Please describe a typical washing cycle to me on the RTW4440XQ Roper 3.1 Cu. Ft. Top-Load Washer, please.


The typical cycle is;
fills to selected water level
agitates wash cycle
drains wash water
spins wash cycle
fills to selected water level on rinse cycle
agitates on rinse cycle
drains rinse water
spins final time
end of cycle

Aug 08, 2011 | Roper Washing Machines

1 Answer

Whirlpool top load washer no low-speed agitation. The unit fills, starts the wash cycle with normal agitation, but after a few minutes it just sits there soaking until the it's time to drain/spin. Drains...


Either the wire going to motor for non working speed is loose or damaged, or motor is bad. It could also possibly be timer not sending power to motor for that speed.

Sep 27, 2017 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Won't finish the final spin


Hi there,

When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Post further comments for more information ....

Good Luck!!

Thanks

Aug 28, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The washing machinge is not completing the complete cycle


When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Jul 11, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Fills but will not agitate, spin, or drain, motor sounds strained


i have a whirlpool that go threw a wash cycle, but will not shin out the water

Apr 16, 2009 | Whirlpool LSR5132PQ Top Load Washer

1 Answer

Basin will not fill with water during rinse cycle but will agitate and spin.


most new washers have cold water only rinse and spray rinse ck cold water coming into machine during wash if no cold comes in suspect cold side of fill vale not opening ..could be wiring issue or a bad valve

Oct 24, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Frigidaire FWS833A Top Load Washer Logo

521 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jason Harris
Jason Harris

Level 2 Expert

269 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...