Question about Hitachi FDX Series 43FDX10B 43" Rear Projection Television

1 Answer

Blue out of line and a curved line across the screen

Alright after reading several of the detailed problems and answers on this site I'm fairly certain that part of the problem invovles having to replace two Convergence IC's (STK 392-120) and several resistors..(6 in total)
But incase I am wrong, here is the complete problem... At the moment the tv has no colour.  It is in black and white, with a double image of sorts behind all objects on the screen.  When I attempted the digital array the blue is out of line.
Also.. from the top left corner to the bottom middle there is a solid line in the screen in a curved shape towards the bottom left corner.  Now this I have no idea how to tackle.  Feel free to look at the pictures to see if it helps..
[URL=http://img355.imageshack.us/my.php?image=img3542zr1.jpg][IMG]http://img355.imageshack.us/img355/879/img3542zr1.th.jpg[/IMG][/URL]
[URL=http://img91.imageshack.us/my.php?image=img3545fy2.jpg][IMG]http://img91.imageshack.us/img91/3661/img3545fy2.th.jpg[/IMG][/URL]

Ignore the white line in the digital array image as it is just the flash reflection
Any and all help will be greatly appreciated Cheers

Posted by on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

The service manual is here in 6 parts and free :
http://www.eserviceinfo.com/downloadsm/31328/Hitachi_43FDX10B.html

Before you start read it
cheers

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung SP47W3HFX tv blue flickering curved line..


If the lines are slightly curved and stationary on about 2/3 of the screen its either the Blue CRT or the Blue CRT drive board which is having the problem.

Dec 19, 2009 | Projection Televisions

1 Answer

When a blue screen appears, what could be the problem?


On this model KP-57HW40, if the screen is blue with or without some slight curved trace lines---either you have a bad BLUE picture tube or maybe an adjustment that can restore the set to normal operation.

A lot of these sets had bad picture tubes----if a bad tube they are not available--only way to get one is remove the bad one in the set and have it rebuilt--very expensive and usually not worth the costs.

Let me know---if you go to a unused video input--is the screen Blue with or without faint curved lines?

If it is I can give you fairly easy instructions on how to try to adjust for this-----Understand: if the adjustment corrects the problem you may only be buying some time with this set---if the problem was caused by a bad tube---sooner or later it may come back...

Let me know if you want the instructions and I will post them here for you.


Regards, SD TECH

Oct 18, 2009 | Sony KP-57HW40 57" Rear Projection...

1 Answer

Letters and numbers are 3d and curved picture


Hello

red, green, and blue lines curve across the top of tv is cause by defective convergence STK IC or you have open resistor at convergence section. if you have defective RGB Color vertical ramp probably you have defective STK IC..

Angel
Thanks...

Aug 02, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

Red and blue streaks across the screen top and bottom


The Convergence Amp IC's are bad. You should call a good TV Tech for this repair.

Jul 11, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Hitachi 46F500 and there is a blue curved bar


Your TV most likely has a Convergence Chip Failure ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg

2c07611.pngSolution #1

You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together convergence repair kits for most models.

The kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, etc. Everything you will need to do the repair yourself.

May 15, 2009 | Hitachi 46F500 46" Rear Projection...

1 Answer

Pcture problem


Replace both STK392-110 convergence IC's with Toshiba or
Sanyo brand...............no cheap junk !!.............T.

Aug 04, 2008 | Toshiba 43H71 43" Rear Projection...

1 Answer

Mitsubishi VS-60111 picture distorted


how do I manually switch my t.v. from 480i to 1080i on dtv with remote.

Dec 31, 2007 | Mitsubishi VS-70707 70" Rear Projection...

1 Answer

Blue lines across screen sony tv


blown fues on the G board, that should fix my problem
and or might need to replace stk392 convergance amp ic's
· http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
· http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Dec 05, 2007 | Sony KP-46WT500 46" Rear Projection...

1 Answer

3 curved lines top & bottom/blurred picture


This indicates a convergence problem..convergence power supply probally.. however ive seen 2 other cuicits cause this ..

Sep 24, 2007 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
Hitachi FDX Series 43FDX10B 43" Rear Projection Television Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...