Question about Bissell 6594 PowerForce Bagless Upright Vacuum

1 Answer

Bissell 6596 bagless turbo - minimal suction & burning smell

Machine developed this problem recently. Accompanied by a roaring noise. Problem the same with the hose totally removed. All filters are clean and belt still goes around. Is it possible there is dirt inside the motor assembly itself? If so can this be accessed easily to clean it out? Thanks. Peter

Posted by on

  • Anonymous Mar 15, 2014

    I have a Bissell Pet Hair Eraser Bagless Vaccum and I love it. I have replace the belt and filters and cleaned out the hoses by I am not getting any suction. All the dirt seems to blow out the back onto my feet. The beater is spinning so I;m not sure where to go next.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 107 Answers

You can reach the motor, however your motor is no longer in operable condition. This is what you hear when you turn it on. You must replace the motor for this to go away. Below is the motor part number if you would like to replace it. It will cost you about half the amount of the unit to replace.

Motor # 2032211

Posted on Dec 19, 2008

  • coljai Jun 09, 2011

    Partially useful. Could consider adding the source of purchase of a new motor. Also is it possible to get the motor winding redone?
    If possible, do mail me a solution at coljai@yahoo.com

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On the canister where up open from the top, is a round hole with a foam piece. When I vacuum is opens and losses suction and makes a weird noise. What is this piece and whats happening?


Hi,

If you are referring to what almost looks like an exhaust, it is the bleed valve which is opening. The purpose is to ensure there is some airflow from somewhere when the machine has become blocked. This is usually accompanied by a whistle noise.

I would go through the checks in the following web pages and make sure that your filters have been washed frequently.


How to remove blockage from the wand and hose

How to remove blockage from the cleanerhead and brushbar


If you continue to have difficulty, please give the Dyson Helpline a call on 1-866-693-9766 (US), 1-877-397-6622 (CA), 0800 298 0298 (UK). Our experts will be happy to talk you through some further diagnostic checks when you have your machine easily to hand.

I hope this helps.

Many thanks,

Allan

Dec 09, 2015 | Dyson DC25 All Floors Bagless Upright...

1 Answer

My dyson d14 animal keeps cutting in and out. When it's on, the hole above where the filter is, keeps making a loud suction noise and it won't clean up hair and dirt.


Vacuum Cleaners require AIr-Flow. Your machine is not getting any air-flow. The noise you hear is a valve opening up to prevent your machine from overheating and burning out the motor.
You probably have an obstruction somewhere in the machine. Dysons are kind of known for that in the vacuum cleaner world.
Check all air channels and clean them out. If that fixes the problem you still might have issues that caused it to clog up.

I posted the part second because it takes 24 hours to complete it.
Be sure you wash your Washable Pre-filter. It needs to dry for 24 hours. Never put it back in the machine wet.

Once it is completely dry reinstall the pre-filter and your machine should be back to normal operating functions.

Let me know f this helps.

Dec 31, 2012 | Dyson DC14 Animal Bagless Upright Cyclonic...

1 Answer

Hose doesn't have suction


Hi Danny,
I am sorry to hear you are having difficulty with your DC18. I understand you have checked for obstructions, however, the problem you are describing sounds like a blockage. Please click on the appropriate link below to view step by step instructions on how to locate and remove a blockage in the wand, hose and the hose inlet. If you prefer we would also be happy to walk you through these checks over the phone. If the problem persists after the recommended trouble shooting steps have been carried out, please call us directly as your machine may need to be serviced by an authorized Dyson technician.

Link to Dyson support page US:
http://content.dyson.com/support/help.asp?article=1049&product=DC18-ALLFLOORS
Link to Dyson support page UK:

http://www.dyson.co.uk/support/dc18/dc18-all-floors/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/how-to-wash-filters/wand-suction



If you determine you need further assistance, please call us directly at 0800 298 0298 (UK) or 1-866-693-9766 (US).


Best wishes,


Jessica

Dec 11, 2012 | Dyson DC18 all floors Bagless Upright...

1 Answer

Lower filter repair to eliminate excess noise


Hi there,

I'm sorry to hear your DC18 is making an unusual noise. Please note, the filter located beneath the clear bin is designed to last the lifetime of the machine, and does not need to be maintained or replaced. Attempting to clean this filter is likely to cause damage, so we'd strongly advise against this.

Although I note you've already cleaned the filter located inside the cyclone pack, you might want to take a look at the video below to check you've done so as recommended. In normal use, this should be done at least once every 3 months. Use cold water without detergent, and allow at least 12 hours for the filter to dry completely somewhere warm before replacing it.

You may also want to run through the troubleshooting steps shown in our Support guide to make sure there are no obstructions you may have missed:

http://www.dyson.co.uk/support/dc18/dc18-all-floors/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/how-to-wash-filters/wand-suction

If your machine continues to make an unusual noise, I'd encourage you to get in touch with us directly, as we'd appreciate the opportunity to provide further assistance. You can reach us on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com/

Apr 08, 2012 | Dyson DC18 all floors Bagless Upright...

1 Answer

Clog and possible overheated


Hi Jen,

It sounds like your vacuum overheated due to the clog. This is a protection feature most vacuum cleaners have to prevent the vacuums motor from burning out due to a lack of air flow. The safety switch will activate and shut the machine off for a short period of time until the motor has cooled.

You should remove the clog from the vacuum, and make sure that your filters are clean. This model has a hidden filter directly underneath of the bagless dirt cup in a black tray that says "PULL". Pull this tray out, inspect the filter, and if dirty rinse under water until clean. Make sure that the filter is completely dry before reinstalling and using the vacuum cleaner again.

After inspecting all of the filters and removing the clog, let the vacuum cool down (usually just a few hours) and try to turn it on again. When you turn it on, remove the attachment hose and make sure that you have suction from the hose. When putting the attachment hose back down into the floor section of the vacuum, listen to see if you hear a change in the noise the motor makes. If you hear a higher pitched squeeling noise, this indicates that there may be a clog in the lower section of the vacuum as well. If the noise is the same then you should be ok.

If the vacuum continues to shut itself off, then either the clog has not been completely removed, or the safety thermal switch inside may now be faulty, and only at this point should you take your machine into a repair store.

I hope that this helped you!

Chris Jones
GoVacuum.com

Apr 14, 2010 | Bissell 37604 Lift-Off Pet Bagless Upright...

2 Answers

Hoover Deluxe Elite Rewind does not pick up


Check the hose and take the bottom plate of the vacuum off to check for obstructions that you can't see right away. Use a wire coathanger (unwound) to push any clog through. I also have dogs and this vacuum. It does get clogged with fur occaisionally.

Apr 08, 2009 | Vacuums

1 Answer

Dyson DC07 is very loud, roaring from the motor


It usually gets louder as the filters clog up and eventually burns out. Try replacing all the filters and giving the bin and the vortex generator a good blow out with compressed air. Fluff can stay inside and cause the motor to strain hence the increased noise.

It must still be under warranty -used to be 3 but now 5 years -so if it doesn't improve contact Dyson and they will repair it free of charge.

Mar 17, 2009 | Dyson DC07 All Floors Bagless Upright...

1 Answer

Vacum won't ****


Do you have good suction right out of the canister without the hose attached? If so, AND your hose isn't plugged, you must have a pretty good sized hole somewhere in the hose. If you don't have suction at the canister, pull the filter cover off the top-back of the machine and remove the filter. This is where all of the air that the machine pulls in is exhausted. If something is plugged here, it will greatly reduce your suction. If you still haven't found the problem, you could have a problem with the fan assembly on the motor. But usually this is accompanied by some noise from the motor, but not always. Good Luck!!

Jan 03, 2009 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

Suction loss on dyson animal


Hi.

Keep the axe on hold try this first.


Ok first thing to do is remove & clean the 2 piece premotor filter or purchase new.

Now remove soleplate from bottom of machine to do this rotate the 3 plastic screws to unlock position. Lift sole plate off now remove any blockagers or fluff that may be built up over the brush roller.
Remove hair from brush roll using scissors.

Check short clear hose for blockages & any damage rips or tares if it is damaged purchase new hose.

Now look at belts & rotate brush roller it should turn relatively easy if it is difficult to turn by hand remove the brush roller & pull off the end caps the axle will come out with one of the caps.
Check the roller bearings clean away dust build up replace end caps & axle spin roller holding on to end cap if freely to spin refit back on to machine.

If its stiff to rotate you will need new roller.

Now pull off the 2 inspection ports check them for bits of paper etc especialy the (U) shaped port at bottom rear of machine this can contain pens pencills stones all sorts of items that hinder the suction.

Now check the long flexi hose & metal wand for any obstructions.

If after all this machine is still not working correctly go to this site http://dysonmanuals.llc.nu/

On this site you will find Dyson service manuals covering poor suction, clutch,motor, etc.

Chris...

Sep 21, 2008 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Bissell 8990 CleanView Bagless Upright - Loud noise


Sounds like maybe your motor went bad, part # 2031052. Would sell for about $60. When the bearings go bad, they can be real loud as well if the fan on the motor when it gets damaged.

Dec 30, 2007 | Bissell 6590 CleanView Bagless Upright...

Not finding what you are looking for?
Bissell 6594 PowerForce Bagless Upright Vacuum Logo

Related Topics:

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Brad Brown

Level 3 Expert

13542 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...