Question about Acer Computers & Internet
Sony VGC-LS30E NVIDIA Display Drivers for Vista Home Premium -
Posted on Jan 07, 2009
Try going into uninstall programs and find media center.
Highlight media center and click on repair.
See if this helps.
Your might also look in your device manager thats located in your control panel and see if there are any problems there.
Posted on May 20, 2009
Lots of people are doing this and part depends on what your home theatre has to offer in the way of connections.
For sound most use the LINE OUT on a computer or laptop and connect that to a suitable input on the receiver using a 3.5mm to stereo phono lead.
If you are lucky enough to have an OPTICAL sound out on your computer and one on the home system that would be a better option.
For the video side again it depends on what your computer has to offer
If it has DVI and your TV or home system has DMI then that is the very best option. Remember to lower the resolution on the computer first and to check and of your graphics card options for dual display. A DVI to HDMI lead is needed for that
NVIDIA graphics cards seem to work best in this area.
If you have a VGA connector on your TV that is another great option and you would only need a VGA lead.
Some cards and laptops have S-VIDEO out. Lots of TV's and home systems have these and the display is quite reasonable. If using S-video connections use a GOOD quality cable.
Some people can only obtain a black and white picture so check your graphics card did not come with any special adaptor.
Another method is composite video Even that is not always 100%
Some laptops need a special S-video adaptor which is just a short little cable to properly enable the S-video and convert S-video to composite. That is probably the worst way to do it.
Using a VGA to component lead is also an option but results vary wildly from no picture to quite good. A lot depends on the quality of the lead once again.
I use the optical sound and DMI lead to power a 50" Sony with great sound and picture.
Posted on Oct 02, 2009
Go to "Device Manager" and look for anything that has a yellow question mark. If you see this, you need to run the set up program for that device to install the driver/.inf file and let the setup program set other parameters.
Since you reformatted, you removed all your previous settings unless you backed those up previously. If it came with the laptop from the store, it should have come with a CD or DVD rom with the install program.
If you lost that, or cannot find it, go to the Sony website, select "support" and locate that driver or set up program and download it. Make an archive copy of it in case it is needed in the future. The device manager should identify what model of tuner card you have.
Posted on Dec 10, 2011
Tips for a great answer:
Nov 23, 2013 | Acer Aspire M5630 Series Original Desktop...
Dec 10, 2011 | Sony VGC-LT16E VAIO 22" All-in-One Desktop...
Sep 25, 2011 | Acer Aspire Z5700 PC Desktop
Jun 29, 2009 | Acer Computers & Internet
Mar 22, 2009 | Acer Aspire™ T180 PC Desktop
Jan 04, 2009 | Sony VAIO VGC-LS30E Desktop PC
Jul 18, 2008 | Acer Computers & Internet
Apr 21, 2008 | Computers & Internet
Jan 04, 2008 | Acer Aspire RC500 PC Desktop
101 people viewed this question
Usually answered in minutes!