Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

1 Answer

Cannot transfer pics from sandisk to computer.

Gives me an error code 2010. please help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers

You should call kodak support for that one (1 800 421 6699)

Yet what I can tell you, is that you should verify that you have less than 1000 pictures, each of which should be less than 8MB big.

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I keep getting error code NVRAM err=0x10, what does this mean?

HP Printers 49.XXXX Service Errors ' Market Point's Tech ...
Jul 29, 2010 - In this article, I'll discuss the meaning of the error, what causes it, and gives ... changes with the firmware or other parts to prevent the error from recurring. ...fixes for a few printers and was surprised to see several 49 errors being ... try a cold reset or NVRAM initialization (see service manual for details).

A wifi spot named "NVRAM WARNING: ERR = 0x10" - DealExtreme Forum
Mar 11, 2012 - A wifi spot named "NVRAM WARNING: ERR = 0x10" ... It has the sameerror, both in wifi settings and in the wifi Analyser app. I did obtain the ...

57.1 printer error - HP Support Center

Dec 17, 2015 | Printers & Copiers

1 Answer

How to c35 chip cencer error disbled than running for machine

Re: error code 0094 on a Konica Minolta C35
Make sure the second transfer release solenoid isn't hanging up due to the pad that's there to minimize noise. See the attached pic. This pad had gotten sticky enough that it was delaying the action of the solenoid. Took a lot of service calls to figure this out!
paperclip.png Attached images

Oct 29, 2014 | Konica Minolta Printers & Copiers

2 Answers

I have ir4570 error code e00007

It is my pleasure to guide you.

Your Canon iR 4570 All in One Printer Manual iR4570
User's Guide can be downloaded at

Look at Chapter 3 Troubleshooting
List of Error Messages ..3-6
List of Error Codes without Messages. . 3-6
You will find the list of error codes.

gives the following;

Detecting Error E007 at canon copier iR2270, iR2870, iR3570, iR4570, iR3530.
As part of its protective mechanism, the machine checks for the following error conditions.
Error Code: E007
Detail: 0000
Sympton: The fixing film rotates in an abnormal way.
Description: The reading of the main thermistor is in excess of 100 deg C with the fixing motor in a locked state and in addition, the machine fails to detect the marker signal for 6 second.

Good luck and please post back that you are successful, giving thumbs up, or that I can be more helpful.

Jun 09, 2011 | Printers & Copiers

2 Answers

How do I transfer one sandisk to another?

plug each of them into the USB ports of a computer. Then you can copy and paste the data from one to the other.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

May 20, 2011 | Printers & Copiers

1 Answer

Hello there, can u help me?my hp laserjet 3500 gives me 59.99 printer error.i junst replaced a new transfer kit. but still not working

The manual states:
An error occurred in the secondary transfer
engaging mechanism.
1. Faulty secondary transfer engagement
sensor. Replace the secondary transfer
engagement sensor.
2. Faulty secondary transfer engaging
solenoid. Replace the secondary transfer
engaging solenoid.
3. Faulty feed motor. Replace the feed
4. Faulty DC controller PCB
Action: Replace the DC controller PCB.

But experience shows that you should look at the Swing Plate assembly. If the gear on it is skipping, it will cause these errors. It is located in the back left under the fuser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Jan 26, 2011 | HP Color LaserJet 3500 Printer

3 Answers

My Aficio 4006 says SC 450

SC450 Paper Transfer Bias Current Leak

There is a charge placed on back of paper as it exits the drum, it is placed on the back of the paper via a charge roller/carona or sometimes a bar of little teeth ie VVVV....its job is to make the now formed pic on the drum come away and be attracted to the paper

This charge is not traveling along the intended path, check the bed are is clean and check the transfer/seperation carona, make sure it and the grid is clean and the wire is intact and not shorting at either end block to frame.

Nov 07, 2009 | Ricoh Printers & Copiers

1 Answer

Gestetner 3225

SC401: Transfer roller leak error 1
SC402: Transfer roller leak error 2
-Definition- [B]
A transfer roller current leak signal is detected.
The current feedback signal for the transfer roller is not detected.
- Possible causes -
· High voltage supply board defective
· Poor connection of the PCU
· Transfer/separation unit set incorrectly

Jul 23, 2008 | Gestetner DSm618 All-In-One Printer

1 Answer

Transferring pics from a memory card onto the computer

I have had the same problem! I do not know what to do...

Nov 30, 2007 | HP PSC 1350 All-In-One Thermal Printer

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides