Question about E-Machines T3112 (RBT3112) PC Desktop

1 Answer

Emachine t3112 only work in safe mode

Mother board went bad changed with another emachine mother board of diffenet model. Downloaded the sound and video drivers and installed the driver from safe mode becuse the os kept asiking for them with the new hard ware found box. Still will not load normally windows xp get to the screen loading winodws then restarts agin going back to a screen that says safe mode, safe mode the networiking and safe mode the command prompt. any ideas. Restore point have been turned off sence i frist got the computer so that my anitvirus will work. Computer did not come with a windows xp disk when I got the computer form walmart

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 111 Answers

You need to run the new hardware wizard as there are differnet drivers needed for the mb

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My computer has no signal


Hello, Sounds like you don't have the right power supply, only and emachine power supply from emachines will work.

Feb 22, 2014 | E-Machines eMachines Desktop PC

1 Answer

I have a used emachine computer not the one that iam using but a deck top model # T3112 and theres a password i dont know so i cant use my computer and would like to know how to get pass the password


You Need To open The CPU(Or tower) to acces the motherboard, the you need to find the CMOS jumper and switch it one spot over the CLR or clear, that will clear the password. If that don't work remove the battery on the motherboard for few seconds then reinstall it. Good luck. 713aa25d-65db-4817-b04a-35f7ab69b846.jpg

Jan 03, 2013 | eMachines Computers & Internet

1 Answer

MY PC Desktop won't boot up, in the back off the tower a clicking green is blinking ,and on the motherboard is also a green light blinking ; i think it is the power supply What i did before this was...


First of all this might sound silly but when you say (turn it back on disconnect my old graphics card on safe mode) did you actually pull out the graphic card from the mother board while POWER WAS ON??? if so you definitively damaged something (the mother board or the power supply) to check you could try an other power supply if it still wont work than it's the mother board, now if I've miss understood your question it sounds like a SHORT CIRCUIT somewhere on the board check for lost screws that could have fallen and running loosely on the mother board while changing your hardware...

Hope this helps!

Feb 09, 2011 | Sony VAIO VGC-RB43 PC Desktop

1 Answer

Can not find heat sink switches on motherboard emachine t2862


Heat sink switches? I have to assume that you're talking about a dead mother board but the fans and the LED on the mother board are OK? This is a classic eMachines problem. Their power supplies glitch and take out the mother board sometimes the power supply goes bad too.

Mar 24, 2009 | E-Machines eMachines Desktop PC

1 Answer

T2984 won't power up


I've re[lace alot of bad eMacines power supplies. Nearly all of them took out the video chip on the mother baord, rendering it useless.

Mar 23, 2009 | E-Machines eMachines Refurbished EMA...

2 Answers

Computer keeps crashing


it is the mother board you will have to goto emachines website and order new one i had same problem in a few days it will get worse

Nov 19, 2008 | E-Machines eMachines Desktop PC

1 Answer

EMachine T3406 wont boot


is there a post beep when the pc is switched on. check the memory if it is a beep beep beep sound , also disconect the hard drive, dvd drive, floppy, and any usb devices and see if it boots up. if that fails it does seem like the mother board, also check the cpu fan has it stoped. also find out the power switch conector on the mother board, from the base unit switch to the mother board. also chech the power connector from the power supply to the mother board , on newer boards there are two that go to the mother board its self , a big one and a very small one .

Jul 05, 2008 | E-Machines eMachines Desktop PC

1 Answer

NO SOUND ON PC


plz visit the manufacture (mother board or the if branded then brands) website

May 24, 2008 | E-Machines eMachines Refurbished EMA...

1 Answer

Emachine model t5082


go in safe mode and adjust your display settings by right clicking on the desktop and select properties, then select settings and change the display resolution to a lower one.

Dec 05, 2007 | E-Machines T5082 PC Desktop

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...