Question about Konica Minolta bizhub C250 All-In-One Laser Printer

2 Answers

I have a C6500 and it has a 2220 code

Can anyone tell me what it is and how to resolve it?

Thanks!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 51 Answers

C-2220 When the transfer belt motor
(M18) was ON, M18 abnormality
detection signal was continuously
detected for the specified
time.

solution
Printer control board (PRCB)
Transfer belt motor (M18)

Posted on Aug 31, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 210 Answers

Transfer belt unit abnormality
When the transfer belt motor (M18) was ON, M18 abnormality detection signal was continuously detected for the specified time.

Reset your Toners and Imaging units for Minolta Bizhub and CF series.
http://www.chipreset.eu

Posted on Sep 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung CLX 6220 says scanner locked but it is not


Dear Bob
pl. make power OFF and lightly knock with your both palm on the both side of the platen( scanner) cover. it may release the temporary jam of the CIS inside the platen glass. Make power ON and test.
If not resolved the scanner assembly to be realigned. If you have experience you may do or else call service engineer.
Thanks.

Mar 18, 2015 | Samsung clx-6220fx multifunction laser...

2 Answers

HOW WE CAN RESOLVE Error message E1 CHG.WST.CTN


Hi,

This tells you that the waste container is full and needs to be replaced. This LINK tells you the step by step process in resolving this issue.


I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!
Mongkey
TIPS: Is your computer slow? This might help
http://www.fixya.com/support/r8158906-diy_manual_pc_tune_up
(for Windows only)

Feb 19, 2011 | Canon Color ImageRunner LBP5970 Laser...

1 Answer

Xerox Phaser 8500 Fault 34,001.43:3113


34,001.43: An error occurred while attempting read/write access to the
Printhead calibration partition in NVRAM. The Printhead cable may be
unplugged. If you have checked all the cables and nothing is ripped then you might have to change the print head.
Part# 046K00530 You can call this company on my directory they even give you the instructions how to do it yourself. They can give you free technical support. Hope this helps.

Nov 19, 2009 | Xerox Phaser 8500/DN Printer

1 Answer

Canon Pixma MP190 Error Code 23


Hi ...

As you mentioned, you have already tried the basic troubleshooting which resolves the issue most of the time ... (good job) ... but sometimes there is a different issue altogether and to resolve the same, you need to get your printer repaired ... I would suggest you get a certified tech. to check your printer.

Cheers ...

Jul 26, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Does anyone know what error code 3807 on a Kodak ESP 5 all in one is? And....can anyone tell me why the dammed thing tells me the print head is not installed every time I turn it on?


found a solution for your error code 3807 "System status failed"

To resolve the error condition:
  1. Disconnect the power adapter from the printer.
  2. Wait 30 seconds to allow the printer to reset.
  3. Connect the power adapter to the printer. Turn the printer on if necessary.
  4. Wait until the printer is ready to use.
If the error condition continues:
  1. Remove and install the Printhead two times before closing the Printer Access Door.
  2. Wait until the printer is ready to use.

If the error is not resolved, contact Kodak.

Jun 21, 2009 | Kodak ESP 5 Printer

2 Answers

Canon BJ-W9000 Error code


Hi Dan,

I have a user manual at home, sorry I am at work at the moment.

I am not sure if it has your code in there but I will have a look, if so I will get back to you.

Sorry this does not fix your problem straight away.

I have a problem that you may be able to help me with?

My fiery controller has crashed!

I need a copy of the disc for the controller, it a Image Pass-W20 print controller, I believe this is the standard print controller sold for this model.

I run PC computers with XP but i think the controller run NT, so i am not sure how they manage to talk to one another?

Any help would be appreciated.

Thanks

Steve
info@thecopyshopuk.co.uk

Feb 10, 2009 | Canon BJ-W9000 Copier

1 Answer

Canon BJ - W9000 Error code: B800A


The BJW 9000 manuel is available as a free download I have downloaded it my self but dont have it at home why not do the same
Tony (withtrader)
best of luck

Feb 10, 2009 | Canon BJ-W9000 Copier

1 Answer

Error code: 49.2F9D


ok, go to the link to fix your problem--
https://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1158526
Thanks

Nov 27, 2008 | HP LaserJet P3005 Printer

2 Answers

Error code F2-45


Ihave Sharp AR-C160. WHAT DOES THIS H4-01 ERRO CODE MEAN? How do I clear it?

Jul 18, 2008 | Sharp AR-C160 Color Copier

1 Answer

Sharp SF-2540 FI-06 error code


looks like a shift error. This is the part that offsets the pages at the exit. See below.
1a21292.jpg

Mar 29, 2008 | Printers & Copiers

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...