Question about HP Photosmart C6180 All-In-One InkJet Printer

1 Answer

Printer error I have the all-in-one HP photosmart C6150 printer and I keep getting an error code 0xc18a0101. I have unplugged the printer, taken out ink, waited a few minutes, plugged back in, inserted ink when prompted and I am still getting the error code. What can I do now?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi ok try I found this I know your error not in here but it may work for It worth a try nothing to lose and it may work. I know your error code is not in this but it some times it clean the error with this type of error number you can gave it a go try not harm it Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...

Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keept getting photosmart ink system failure code 0xc18a0101 I have tried turning the printer off and even uninstalling and restalling the printer and it keeps giving me the same error code I have a...


Hello;

Try Resetting the printer

* Switch off the device
* Unplug the Power cable of the device and the usb device of the printer
* Wait 30 seconds
* Plug the power cord and usb back
* Try test print

If not solved try servicing your device

Nov 03, 2010 | HP Photosmart C6280 Printer

1 Answer

Hello. i have the hp Photosmart C6150 printer. for


Press the button on the printer, to turn the printer off.

Then, press the switch on the power-bar, to completely cut the power to the printer.

Turn the power-bar on.
Turn the printer on.

Jul 06, 2010 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

HP PHotosmart c6150 keeps shutting on and off repeating the same meassage improper shutdown.


You need to reset the printer. I had the same exact problem with a C6150. Unplug the power cord from back "while printer power is on" (doesn't have to be fully booted just turning on). Wait 20 seconds, hold # and 6 keys together and plug power back in. Continue to hold until power goes off or semi-reset message comes up. Power up (if off) press OK for any error messages and let the printer cycle. Should be good to go. Mine sounded very noisy while it was trying to allign internally. I can only suspect that was the initial problem but this process fixed mine and it runs great now. Hope this helps.

Jan 27, 2010 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

I have a c6150 all in one hp with a oxc 18a0206 error code how do I fix


goes through below link i think it will help you


http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Photosmart-C5180/m-p/130071/message-uid/130071

Dec 08, 2009 | HP Photosmart 3310 Printer

2 Answers

C7280 error msg 0xc18a0101


You press # * at the same time...... with the navegation arrows you go up to system configuration, with the arrown you navegate until you see error report...then you clear the error report.....then you turn off the printer...unplug everything from it.. unplug ac adapter from the wall wait 1 minute... then plug power back....turn on printer an Voila...is working

Jul 22, 2009 | HP Photosmart C7180 All-In-One InkJet...

3 Answers

HP C6150 Printer that turns off then back on repeatedly


Please DON'T keep posting messages that say "I had the same problem..." Those are useless!

If the software resets don't work, it's possible it's an electronics problem. Here is a repair note that worked for me:

http://www.fixya.com/support/t5821942-hp_photosmart_c6180_continually_powers

Jun 27, 2009 | HP Photosmart C6180 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart C6180 All-In-One InkJet Printer Logo

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98796 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...