Question about Lexmark C750 Laser Printer

1 Answer

Code 200 Paper Jam Error

Sir I have problem with may C750 Lexmark that keeps giving me a code 200 paper jam error. There is no paer jam into the system and doing system warm up it get to certain part of the fuser and stop showing this 200 Paper Jam. Anyway suggest as to why I'm getting this error and could you tell me how to fix the problem as well.

Mike

Posted by on

  • dpinnick Dec 22, 2008

    during boot up it says paper jam, but I have emptied every drawer, etc. and there is no jam. How do I get this resolved?

  • Anonymous Apr 30, 2009

    The 200 paper jam at power up in this model is usually caused by a scrap of paper that is actuating the paper input sensor or narrow media sensor. Remove all 4 toner cartridges and the ITU assembly. Look at the sensors under the metal croos bar that supports the ITU any you will probably find the culrit. If not chech that the sensor actuators are not dislodged.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hi Mike,

This error can be caused by many reasons, some of them are:

Caused by Paper Stuck Under the Second Transfer Roll


Sporadic or Intermittent 200 Paper Jams

"200 Paper Jam" Resulting from a Possibly Damaged Tray


"200 paper jam" When Attempting to Print from Tray 2

To troubleshoot this problem, please click the links with their respective causes.

Please rate it fixya if it was helpful.

Thank you

Posted on Feb 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 201 lexmark t630


201 is a paer jam message generated by the fuser (hot thing in the back of printer) remove rear door and the redrive unit. ( two screws on back of printer and press in two levers on upper portion of back to remove) either the switch on the left of the fuser is stuck or the switchneeds replacing (assuming it is a false paper jam)

Oct 15, 2013 | Lexmark T630 Laser Printer

2 Answers

4TH LIGHT FROM THE TOP KEEPS COMING ON LEXMARK E232


What this light sequence means that the printer has a paper jam.

When a paper jam occurs, the printer stops and the operator panel's Paper Jam light and Continue button lights come on. Press and release Continue twice quickly to display the specific secondary error paper jam light sequence.


How to clear Paper Jam

Press Continue button twice quickly to see the secondary error code.


To get the secondary error codes

When the Error light (!) and Continue button lights are both on, a secondary error has occurred.

When the Paper Jam light (4th light) and Continue button lights are both on, a paper jam secondary error has occurred.

Press and release Continue button twice quickly to display the secondary error code light sequence.


Press Continue button to resume printing once all the jammed pages are cleared from the paper path.

We recommend that you clear the entire paper path when a paper jam occurs.


To clear a paper jam:


1 If you are feeding paper from a tray, remove the tray, and then remove any jams.

2 Open the front cover and remove the print cartridge assembly.

NOTE: Do not leave the print cartridge assembly exposed to direct light for an Extended period of time. Extended light exposure can cause print quality problems.

3 Remove any jams in the area behind the print cartridge assembly.

4 Lift the flap at the front of the printer and remove any jams beneath the flap.

5 Open the rear exit and remove any jams.

6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer covers and trays are closed, and then press Continue button to resume printing.

NOTE: The printer reprints the pages that caused the paper jam.

Jun 30, 2011 | Lexmark E232 Laser Printer

1 Answer

I keep getting a paper jam error with my Optra S 1855 printer, but there is no paper jam. This error interchanges with a message asking me to Change the paer in tray 1 to letter size, but it is already...


Open the tray and make sure the green paper lever is set to letter mark, both at the bottom of the paper and the one on the side. And yes, if you haven't used it for 3 years, you should clean the dust that settled inside your printer over time.

Dec 06, 2010 | Lexmark Optra S 1855 Laser Printer

1 Answer

Lexmark x7550 printer jam. I cleared the jam and hit the check mark button as directed, but it keeps looping through the paper jam sequence. It does not seem to register that the jam has cleared. If I...


There will be some form of error clear code that would need to be entered. It would be something like "holding down the print key and powering on the printer at the same time" The manual may tell you.
There are different combos for different manufacturers.

Nov 17, 2009 | Lexmark X7550 InkJet Printer

1 Answer

Where is the paper jam when the panel of our Lexmark C750 says "200 paper jam"


Primary: Paper is jammed at the printer input sensor. Open the printer left door to access the paper jam. If sheets have been accumulated to be stapled or offset when the jam occurred, the printer alternately flashes the primary and secondary messages to indicate that all accumulated sheets not be removed during the jam clearing procedure.
Secondary: When this message is displayed, do not remove accumulated sheets during the jam clearing procedure as the printer will not reprint the removed sheets. Also, if the accumulated sheets are removed, the portion of the job printed after the jam will not be stapled.

Nov 03, 2009 | Lexmark C750 Laser Printer

1 Answer

202.01 and 202.03 Paper Jam


The 202.03 error code has to do with an early life failure of the fuser. Try replacing the fuser. If that doesn't work, a tech is needed to replace rear door. Don't forget to reset maintenance counts when you replace fuser!!

Jul 01, 2009 | Dell 5310n Laser Printer

1 Answer

Lexmark E352dn - 200 Paper Jam


you see your printer feed sensor or delivery sensor is open chack it

Jun 26, 2009 | Lexmark E352dn Laser Printer

1 Answer

Error code on Ricoh FT5733 copier


Open ALL paper jam locations on the machine. The jam code only means the paper jam is somewhere BEYOND the paper drawer. Check ALL jam locations including duplexer, bypass, and ALL paper drawers.

Nov 12, 2008 | Printers & Copiers

3 Answers

202 pam jam


usually it means that a sensor in your fuser is bad. If you have a P.M. Kit replaced the fuser and clean the printer.

but before you do, make sure that you have cleared all jams, including in the fuser.

Its probably time for a Preventive Maintanence

Jun 13, 2008 | Lexmark T630 Laser Printer

4 Answers

Print cartridge is stalled


this will need to be taken to the service center for servicing.NO easy aasy to solve this problem

Jun 08, 2007 | HP PSC 2410 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark C750 Laser Printer Logo

1,363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...