Question about PC Desktops

2 Answers

When i plug in a new usb device my mouse stops responding

Posted by on

  • mikeb1990 Dec 19, 2008

    reset what address?


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 46 Answers

There is obviousl a clash between the devices . how many devices do you have plugged in to the usb? do you have a powered hub? if you dont you need to check the amount of power allocated to each device in case there is not enough power allocated to the usb slots
try having a look on
http://www.usbman.com/
to see if the problem is listed there

Posted on Dec 19, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 111 Answers

That is a hardware conflict reset the address

Posted on Dec 19, 2008

  • Leslie Dec 19, 2008

    look in the system device mgr. for conflicts and forced hardware and write me at www.safecompute.org on my contact us page for free tech. advise

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a HP Pavilion s1600n with Windows XP Media Edition. The keyboard and mouse have stopped responding. Both are properly plugged in


if you are sure that your mouse and keboard are in good condittion and it is all ps2 port type the problem maybe the system driver for keyboard and mouse of your operating system, please get an extra usb port type keyboard and mouse and plugged it in to your pc and power it on the usb type keyboard and mouse may refresh the system driver and may read again your ps2 type keyboard and mouse.

Sep 04, 2011 | HP Pavilion a1600n (882780776265) PC...

2 Answers

Can I use a mouse and keyboard with a USB port?


Hi,

Yes, you can use a USB mouse and keyboard. Just plug those devices at the back of your computer. Restart the computer if the devices do not respond.

Thank you for choosing FixYa!

Apr 23, 2011 | E-Machines eMachines T3830 PC Desktop

1 Answer

The mouse on my computer is not responding, it is like it is frozen. i have tried to reboot but nothing is happening.


if you are using an optical USB mouse, then check if the LED sensor lights up, if the light sensor is off, then your mouse is probably defective.

If the mouse still lights up when your computer is on, then try to refresh the usb driver for this. go to CONTROL PANEL, select SYSTEM. Go the HARDWARE and select DEVICE MANAGER.

Look for MICE and OTHER POINT DEVICES, select your mouse driver, right-click and the UNINSTALL driver. Once mouse icon is gone, you can click REFRESH or simply restart your PC again and wait for windows to redetect your usb mouse.

Oct 18, 2010 | PC Desktops

1 Answer

Mouse not responding


Clean the PC Mouse
1. Unplug the mouse, turn it over, then twist the retaining ring counter clockwise to remove it. Remove the trackball inside the mouse.

2.Clean the trackball with warm water and dry carefully. Clean the rollers inside the mouse with a cotton swab dipped in alcohol. Replace the trackball then secure it with the retaining ring.

3.Clean the outside of the mouse with rubbing alcohol and a cotton ball. Use a small amount on one area at a time. For an optical mouse, clean the bottom of the mouse and the surface it sits on with a damp cloth.
Fix PC Mouse Problems

1.Plug the mouse back in. The connector will either be USB or PS/2. A PS/2 connector is color-coded green and can only be inserted in one direction. Check for any bent or broken pins, then carefully plug it in making sure the connection is secure. Reboot the computer, and then test the mouse.

2.Connect the mouse to another computer. After the mouse is connected to a different computer, reboot the system, and then test the mouse. If your mouse works on another computer, the problem is most likely with your PC or operating system

3.Check for device conflicts. When you install another device on your computer it can sometimes cause conflicts with a PC mouse. Remove any new hardware and drivers you may have installed then reboot the computer.

4.Reinstall PC mouse drivers. In Windows, open "Control Panel" then "System." Select the "Device Driver" tab then scroll to and select your mouse. Uninstall any drivers that are listed. Unplug the mouse then reboot the PC. Reboot the system again, plug the mouse back in, then allow Windows to reinstall the drivers if prompted.

Please rate me if this solution works for you

Thanks......Have a great time.

Aug 19, 2010 | PC Desktops

2 Answers

After rebooting my cpu my mouse stopped working. My cpu does not recognize my mouse? The mouse works because i tried it on a different cpu. what can be causing this?


Did you try to reboot?
Do you have an optical mouse? (if yes: is the red light on?
(Then the mouse is recognized and you must configure your mouse options)
Did you try to connect your USB mouse to another connector?
Or if PS2 connector: Turn of the pc and connect the mouse and power on.
Did you install a new driver? (then uninstall this driver)
Try looking for the most recent mouse driver on the manufacturer site.

Jul 13, 2009 | HP Pavilion a1610n PC Desktop

2 Answers

Compaq presario sr2150nx keyboard and mouse wont work


maybe the devices are both defective or you mistakaly plug it to the wrong ps2 port.check its pin.

May 05, 2009 | HP Compaq Presario SR2150NX PC Desktop

1 Answer

I just bought a new computer and during games, when I move the mouse, sometimes it doesn't respond well, it will lag out, and move slowly at times. It's a new mouse and I even checked other ones but they...


1.Try cleaning the bottom of the mouse.

2.Is it a USB based mouse? Check the USB hub\devices to make sure the drivers are installed properly. Try using the mouse on different port.

3. Your mouse might be driver specific, so the default mouse drivers might not work with the one your using. If they are you'll need to download the ones they need.

Hope This Helps!!!  Please Don't Forget to Rate my Response!!! Thanks!!! yuva

Mar 23, 2009 | PC Desktops

1 Answer

Responding error of mouse or USB while using it?


This seems like a conflict in the drivers. Check the device manager for conflicts like a yellow esclamation mark. YOu can get to it by going to start /control panel /system icon / device manager

Mar 03, 2009 | Lenovo 3000 N100 0768 - Pentium Dual Core...

1 Answer

Mouse problems


Usually this happens whenthe software for the usb ports' controller is not as current as it should be.
check your computer manufacturers' website for and updated driver. USB 2.0 is what you are looking for. This can work in reverse also , if you are using a legacy USB device (mouse) and try to use USB 2.0 devices on the same controller it can cause problems as well. A new USB mouse is inexpensive, but always check the BIOS and make sure all USB ports are running and that the controller is enabled for them with current drivers.
If you post the computer make and model number i can be more specific with my advice.
Please post again if you need further assistance & thanks for using fixya..
Regards.

Oct 22, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...