I have an EasyShare 5500 that will print the calibration sheet, however it will not scan and align, it just keeps saying that calibration page not detected.. What do I do? It also will not print red, even after deep cleaning the heads. It just prints pink.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you calibrate the 5100 AIO, first, you push in the photo paper drawer until it CLICKS. Next, print an alignment sheet. It will use the photo paper. Pull the drawer out, put the printed sheet in the scanner bed, with the arrow in the right hand corner, closest to you. Press start and it will scan and print a sheet on full sized paper. If your initial scan doesn't print onto photo paper, you don't have the drawer pushed in the whole way. There is a definite click and the green light will turn on.
You may have a faulty printhead. I just purchased a new one and had a time with it. Awful color in picture. Kodak sent me a new printhead and new ink tanks. Now it works great. You may have printhead trouble also, contact Kodak for help.
I think it may be a faulty printhead. Phone or email Kodak, email email@example.com or phone 1-800-421-6699. option 1.
If its a bad printhead Kodak will send you a free one by overnight air. will also send you a free black and color ink ,cannot beat that.
First of all, you only need to calibrate the printer once (when you first set it up). Second, you can calibrate it on regular paper. Third, if you can print pictures without a problem, then you should not worry about the calibration page at all.
Sorry to hear that you are stuck?
If and when you regain the function of the menu button, you should perform a calibration. It should be done every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable high-quality prints.
1 Load the main tray or photo tray with photo paper. You don't have any photo paper, but it is recommended for calibrations.
2 Press Menu.
3 Scroll down until Calibrate Printer is selected.
4 Press OK. A new screen appears with Print Calibration Page selected.
5 Press Start and follow the instructions on the LCD screen to complete the calibration.
If the stuck condition presists, let us know. Best bet is to call us directly at the 800 421 6699 as our team will be able to get you running quickly.
Talk tol you soon,
the friendly Kodak guy
If your product is still within the warranty period from KOdak then you can call them up for some step by step troubleshooting to help you with your problem and as well they can replace the printer if defective.
Try this first
Calibrate your printer, then print a demo sheet.
If paper is in the photo paper tray, remove it.
Load photo paper into the photo tray.
Fan the paper to keep the sheets from sticking together.
IMPORTANT: Do not overload the photo tray.
Load a maximum of 20 sheets into the photo tray, with the Kodak logo facing up.
Engage the photo tray by pushing it in until it stops.
Calibrate your printer.
Select Calibrate Printer, then press Start.
Wait for your printer to print the calibration sheet.
Place the calibration sheet face down on the scanner glass.
For the 5300 AiO printer, place the sheet on the front right corner of the scanner glass.
For the 5500 AiO printer, place the sheet on the left rear corner of the scanner glass.
Wait until "Calibration complete. Remove calibration page from scanner glass. Press OK to continue." appears on the LCD display.
Remove the calibration sheet from the scanner glass, then press OK.
Print a demo sheet.
Disengage the photo tray by sliding it towards you until it stops. When the photo tray is disengaged, the main tray is active.
Select Print Demo Page, then press Start.
Wait for the demo sheet to print.
Then call them if issue Persist at these numbers:
In the U.S. and Canada: 1-800-421-6699
In Australia and New Zealand: 1800 793 895
To calibrate the printer right click on the printer icon and open the status monitor once you open it there is 3 symbols on the top right of the box one looks like a hammer and wrench in an x configuration, next to that is an i for i for about and a ? for help. Click on the x which is Maintenance it will bring up a new box which has 2 options calibrate and printhead cleaning when you chose calibrate it will print a calibration sheet which you then need to put into the scanner portion and press the start button, these instructions will also come up on the screen when you go through the process.
Hello, you can print a calibration sheet from the front panel of the printer. Hit menu on the panel of the printer and scroll down to calibration printer and hit ok. Then hit ok on print calibration page and it should proceed to print a calibration page. After it is done printing, it will tell you to scan the calibration sheet.