- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Thanks a lot Mr. Chiang
But I don't know "Setting Mode (08-690: 2)"
Please tell me how to it.
My machine's say's "initialize completed!
Do I run on my machine Download?
USB do I prepare the thing empty?
If the developer has been changed. You need to go into service mode to calibrate it before you print. If you don't run the program and you make copies, copy quality will change and you may have to replace the developer again.
Once it is replaced go into service mode and issue the service code to calibrate the developer.
If you haven't replaced the developer yet, you should.
In the service mode there might be an automatic fuser and drum cleaning mechanism that could be activated. The fuser web is in the drum section of the unit and when this is coated with toner and the cleaning mechanism is inactive, you could get this problem.
Let me know if you do not know how to get into the service mode of the copier. It normally is pressing the following three buttons simultaneously - Original, Function and the number 3. It may take a few tries before you get the sequence properly. Also, if it requests a password, try 0000 or 00000000 (8 zeros or 4 zeros)