Question about Maytag MER5775Q Electric Kitchen Range

Open Question

MER5570BCW Maytag stove gets error code F9

Oven shuts off and displays F9 error code and beeps. Then it says "lock" except door doesn't lock. Had repairman replace whole clock unit and check locking mechanism three days ago. Tonight it did same thing again.

Posted by on

  • jill_work Jan 19, 2009

    I have this error code as well. It keeps beeping and displaying f9. However it is not locked nor does the panel say it is. I have replaced the ignitor, the oven sensor and the computer board. It worked for a day then started reading f9. Somebody help Please!!!!!!

  • Anonymous Mar 07, 2009

    I have this error code as well. It keeps beeping and displaying f9. However it is not locked nor does the panel say it is. I have replaced the ignitor, the oven sensor and the computer board. It worked for a day then started reading f9.

×

3 Suggested Answers

  • 247 Answers

SOURCE: Maytag Stove Model MER5570BCW purchased

welocome-
when it says F9 on the screen it means ther is something wrong with the Door Latch - Check door latch, switches and wiring. I would start here first.

thank for using fixya and let me know if you need any more help.

Tom

Posted on Dec 19, 2008

richroth
  • 9472 Answers

SOURCE: My Maytag Gemini oven is

F9-2 error code indicates:

  1. Door latch motor failure/jammed. Latch motor switch failure.
  2. Oven control software failure, or component failure(stuck relay).
  3. Wiring problem.
  • Press the clear key.
  • If the Clear key does not eliminate the problem, turn off the power to the range for 30 seconds, then turn the power back on.
  • It is most likely to have a failed or misaligned door lock switch.

Posted on Feb 06, 2011

reyjoshua07
  • 1157 Answers

SOURCE: I have a Maytag MES 5770AAW. My data control

Hi dixiedarl862,

The F9 fault code is about the door latch, please check the door latch components.

Hope it helps.

Thank you for using FixYa.

Posted on Jun 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The ovens fail to work after the cleaning cycle - displays says "call service". Now both ovens will not operate and neither do the timers.


Maytag model MER6772BAW was displayying f9-2 and call Authorized
service after cleaning also top door was locked and feature were disabled. I was able to solve the problem by unplugin the stove and waited about ten seconds before re-conecting once up the top door unlocked cleared the f9-2 error by pressing Auto set button and number 9 for Defauts. Perhaps this can help you.

Aug 14, 2009 | Maytag MER6772 Gemini Electric Kitchen...

1 Answer

F9-6 fault code on maytag gemini double oven range


I waited until the next morning and hit the cancel button. It cleared the error

Apr 09, 2009 | Kitchen Ranges

1 Answer

The display at top of stove is showing "F1" and continuously beep


Maytag Range / Stove / Oven Fault Codes Failure Code Fault Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information. F2 Oven temperature too hot Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness. F3
or
F4 Shorted or open oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. F5 Watchdog and hardware conflict Replace clock (ERC). F7 Function key shorted or stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F8 Analog / Digital problem Replace clock (ERC). F9 Door latch Check door latch components.

Mar 19, 2009 | Maytag PGR5710 Performa Gas Kitchen Range

1 Answer

Error message and alarm


These are the fault codes for your unit
Maytag Range / Stove / Oven Fault Codes Failure Code Fault Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or clock (ERC) Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information. F2 Oven temperature too hot Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness. F3
or
F4 Shorted or open oven temperature sensor (RTD) Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok. F5 Watchdog and hardware conflict Replace clock (ERC). F7 Function key shorted or stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F8 Analog / Digital problem Replace clock (ERC). F9 Door latch Check door latch components.
Hope this helps, Please take the time to give this solution a fix ya rating

clarkco

Feb 27, 2009 | Maytag MGR5870 Gas Kitchen Range

1 Answer

How do I clear error beeping (F9) on my Amana gas range


try to hold in on the oven light switch plunger that the door would hit if it was closed properly. what you probably did was to pull the door open while it was trying to lock. once you hold the plunger in, then hit the clean cycle again and then push to cancel button to get the door latch to unlock the door. it may take a minute or two but that should clear up the error code and let you use the oven again.
next time if you push the clean by mistake, just let it go and then when it says "locked" just push the cancel button. it will unlock and be ready to use.

Jan 27, 2009 | Maytag MER6772 Gemini Electric Kitchen...

3 Answers

I get failure code F9-3


What a scam by service personnel.
-Simply press "Stop/Clear", then gently push the door handle until "Lock" appears on the screen. Press "Stop/Clear" again and the door unlocks itself!
J. Kalicak

Jan 22, 2009 | Jenn-Air JES9800A Electric Kitchen Range

1 Answer

Jenn-air shut off while cooking giving f9 code


code F9 keeps flashing when I attempt to turn on my oven. What does this mean?

Sep 03, 2008 | Jenn-Air JES9800A Electric Kitchen Range

2 Answers

My frigdaire stove door finally opened manually from behind but


F9 code: An F9 code indicates the EOC has detected a problem with the motor door latch assembly. Check the contacts of the lock switch, wiring to the lock motor assembly, and the lock motor.

Dec 16, 2007 | Frigidaire FEF455BB Electric Kitchen Range

Not finding what you are looking for?
Maytag MER5775Q Electric Kitchen Range Logo

Related Topics:

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Kitchen Ranges Experts

gbob59

Level 3 Expert

2963 Answers

freddyfox

Level 2 Expert

236 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Maytag Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...