6 cd shelf system the door will not open

Koss XJ310 Shelf System Door not open - Questions - Fixya

www.fixya.com > ... > Koss > Koss XJ310 Shelf System

Question about Bang and Olufsen Audio Shelf Systems ... ...not opening. sign on screen,is flashing door.after pressing select button,sign disappears.door does not open The ... The cd player will not open when you press the open close button.

cd player door opens closes itself Audio Shelf Systems ...

www.fixya.com > Forum > Tags > cd player door opens closes itself

Get free help, advice & support for popular audio shelf system brands. ... CD player model SA248 the doors opening and closing mechanism does not work. ... flashingdoor.after pressing select button,sign disappears.door does not open The .

JVC MX-K30 CD Shelf System Cd door not open ... - Fixya

www.fixya.com > ... > JVC > JVC MX-K30 CD Shelf System

Question about Philips Audio Shelf Systems. 1 Answer · CD player door not opening. CD player door not opening when pressing cd open and closing select button ...door.after pressing select button,sign disappears.door does not open The .

How to fix a CD player drawer problem - #1 - YouTube

? 9:21
https://www.youtube.com/watch?v=FngAg3mk2Ug
Apr 27, 2008 - Uploaded by Eric Barr
When CD and DVD players stop working, its usually because of the drawer not opening and/or shutting ...

Most CD players have a small hole in the front bezel, below the disc tray door. If you straighten a large paperclip and push it straight into this hole, about 1.5 inches, the door should pop open enough for you to pull it completely open with your fingers.

It may take a couple of tries, as you need to hit a small metal tab directly inside the hole, about 1/4 to 1/2 inch in.

If you hit the open button and you hear a sound like a motor running than it is most likely a belt or connection that physically opens the tray. You'll have to take it apart, locate the cd player and check from there. If no sound of a motor running when the button is pushed then the motor is probably bad.

Fiddled with it, looked at hinges to figure direction should open and pulled it slowly open. Button doesn't work but I can open/close unit. Just flips up from the front edge, doens't slide back or anything.

Carousel changers frequently fail.

gently push the cd door back in while pushing the door closed button , untill it closes if it still comes out then the cd laser mechanism is not lifting or something else has happened , then it will need to be tested to determine the exact cause

is it all cd or just new burned ones try older orginal cd once still does it bad tray man on this dought technic sells ust tray player on this model

the door could be stuck or the cd laser mech. is stuck or the power circut for the motor that opens the door or the motor has become weak or ect..... there are many posibilitys but you need to listen for the motor sound or a click when you hit the button , if you do hear it then its stuck or the motor is to weak and needs to be replaced , or the circut isn't giving enough power to the motor

This is an easy fix if you are somewhat handy.... The belt for the door/tray is slipping. If you remove the enclosure and face plate, you will see two motors below the disc drive. Press eject while observing the pulley to the left. You should see the problem with the motor shaft spinning and the belt slipping. Replacing the belt is possible without any further dissassembly. Simply bend some light wire into an L shape and you should be able to hook both pulleys and lace the new belt on. As far as obtaining a new belt I decided to do the simple thing and use a slightly smaller rubber band. The repair has held now for almost three months and the player is used everyday. Good luck.

The motor is last thing to gone before you go to service check the rubber belt which connect the motor to the door gears.Your set is 20 years old and this should be the problem and easy to fix