Question about Siemens SpeedStream Modem (4100) (SS4100)

2 Answers

I have changed my internet provider and have lost the instulatin cd i was wondering how can i setup my new username and password with modem

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 86 Answers

Hi. Checkout http://www.gmbargains.com/Download/Siemens%20Speedstream%20Modems/and you should find everything you need. Thank you.

Posted on Oct 16, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 92 Answers

You need the cd... id call who ever your providor is

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot reset my password


Im presuming its your internet connection password ?

Your Internet service provider (ISP) requires a username and password to access service features, including Internet and email.


Your ISP should provide this information when you set up your Internet service.


Typically, once you complete the setup and save the information, your router or modem transmits it behind the scenes when you try to access the Internet.


As a result, the username and password can be easily forgotten because they are not used daily.

If you reset your router or simply forget the password, gaining access to network resources and the Internet becomes a challenge.


Call your ISP's technical support department.

Many ISPs set a default username and password for their routers.


If you didn't change the username and password, your ISP can provide the original information.


Before you hang up, make sure the information is correct by entering it and trying to connect to the Internet.

If the information is incorrect and you still cannot get a connection, keep the information for later reference.


Call your router's manufacturer.

The manufacturer of your router sets a username and password prior to shipping the device to your ISP.

Look at the router for the contact information of the manufacturer.


Call their customer service or technical support department and ask for the default information.


Reset your router.

If you changed your router's username and password and cannot remember what you entered, you may have to reset the router.


Insert the resource CD into your computer's CD drive.

When the software installation program starts, search the screen for "Resources" or "Documentation" or "User Manual."


Click the documentation link and search the table of contents for resetting the router.

When you reset the router, the username and password return to the default set by your ISP or manufacturer.


Enter the information provided by your ISP or manufacturer.


Hope this helps.




Nov 15, 2012 | Computers & Internet

1 Answer

Tenda router input eror


It's not the username and password from your ISP. If you try to access your router and you have not changed anything, use the following values:
username = admin
password = admin

Once in the router interface, you will have to configure the router for your DSL-modem (I guess it's DSL since Windstream does not produce cable modems.)
Here fill in the username and password your ISP provided you with.

Let me know if you have any questions.

Nov 14, 2012 | TP-LINK Tenda W311R WirelessN Router AP...

1 Answer

How to program to my new enternet connection


HEllo bro...

I don't know what model that use, however here the best explanation for you..

-------------------------------------------------------------------------------------------------------------
Preparation:
1. Username and password for router.
2.Username and password for provider internet.
3.Ethernet cable (rj45 connection)
5. Pc /laptop to setup router ( on step i'm referred to pc)
4. Web browser( more preferred to using internet explorer current version)
---------------------------------------------------------------------------------------------------------------

Step:
1. Plug Ethernet cable to router
2. Plug another end Ethernet cable to pcthat you are using to setup
(Now you have cable was connected between pc and router)
3.Switch on the router.
4.Open web browser. Or click here http://192.168.1.1
5.Some window will popup
6.Enter the username and password for router. If default( mean you don't change username or password,you can leave blank for username and fill password with "admin")
If still can't enter try search at google with your model and brand for username and password default.
7.After success enter, then using the wizard .
8. Fill the username and password for provider.
9.FInish.
-----------------------------------
For step 7th, to 9th, you can directly go setup internet connection( depend to model, sometimes it just type setup) where you will find ppp username and ppp password.. change it..
Good luck and be careful. sometimes you make it right but router need time to create new connection..
For the best go here Lynksis setup

Jul 06, 2011 | Linksys Cable Modem

1 Answer

I need to change the modulation type on my modem to select g.dmt to make my internet connection more stable HELPPPPP!! i have NO clue how to do it. it's an ADSL 2+router DSL 504T.i am computer...


To configure the modem You will need to use the cd provided.
ftp://files.dlink.com.au/products/DSL-504T-GenII/QuickInstallGuide/DSL-504T_C3_QIG_v2.00.pdf

Or to configure without the cd follow the steps below:
  1. Connect the Adsl router with your computer.
  2. Use the network cable provided with the router.
  3. Connect the power cable to the modem, it will light on firmly with a green button on.
  4. Open your web browser and type the ip address: http://10.1.1.1
  5. Default username and password is:
  6. User-name: admin
  7. Password: admin
  8. Use the quick setup wizard.
  9. It will be more easy for you to configure it.
  10. Be sure to have the username and password from the ISP for the internet access, you may need to reconfigure it from start. or if you may need to reset the modem
  11. At times to access your modem you will need to set the ip of your network card to the same range.
  12. To set the ip go in control panel then open network connection
  13. Doulbe click the local area connection.
  14. open Internet Protocol Open Tcp/ip
  15. then set your ip Like: 10.1.1.5
  16. ok
  17. ftp://files.dlink.com.au/Products/DSL-504T-GenII_NZ/Manuals/
I am enclosing a manual for you.
If you Need further help do not hesitate to revert back
Ok cheers
Uttam

Feb 13, 2010 | Computers & Internet

1 Answer

CANNOT GET INTERNET TO WORK... SHOWS ALL


If the internet light is red, it means that the modem is not getting the connection from your ISP.

To verify the settings, just access the setup page using a web browser. Type 192.168.1.1 in the address bar.

By default the username is admin and the password is password.

If this doesn't work, try admin for the username and password. If still not working, you will need to reset the modem.

Once on the setup page, go to Configuration.

If you have a PPPOE connection, make sure that the username and password provided by your ISP is correct on the firewall.

If you have DHCP, the modem should be in bridge mode.

I hope this helps! Good luck!

Jan 11, 2010 | Westell Wirespeed LiteLine 6100...

1 Answer

The modem's been changed and cannot locate the CD to the driver to connect to the internet. The model is DSL-G604T/AU V.A3.


Hi! your dlink dsl-604T is adsl router modem, you can access the setup page of your modem router by connecting your computer directly to the port1 of the modem router and the cable from your isp should be connected to the WAN port. u need to pull up the browser and type in at the url:192.168.1.1 and it will ask the username and password, by default the username is admin and the password is 1234 or leave it blank, but i suggest before u do this steps. u need to reset your modem/router. there is a reset button on the back of the router and press it for 20secs and then unplug and replug it after 10secs. after that u can pull up the setup page of the router.. to check the default gateway of the router, right click the network icon on the lower right of the task bar and select status and it will show the ip address, subnet and default gateway..

u need to know what internet settings u have with your internet provider, bcoz once u access the setup wizard it will ask u the type like auto-dhcp, pppoe, static etc.. if your isp gives u a username and pass to connect to internet u have to select pppoe or if u are given a static ip address setting u need to select static ip... just follow the setup wizard..

Aug 17, 2009 | D-Link DSL-G604T Wireless Router

1 Answer

I need manual installation instructions (dont have cd)& key code for Gateway 2wire modem model 2071-A


It appears to be a DSL modem. You don't need a driver, but a username and password for your internet provider. Here is how you install.
connect to phone line then usb or network port (drivers should be built in xp) open your internet browser and type 192.168.1.1 to open the internal web page. It should step you through the username (email address) password. Must ask your internet provider for those.

Apr 29, 2009 | Computers & Internet

1 Answer

I need to find the procedure for at&t 2wire DSL modem wireless connection. I lost the security code and password. The Serial N# is 140811022206 and another # is (2701HG-B) could be the model number. ...


Try going to http://Helpme.att.net your support site or try calling your Internet provided and asked them to create a new username and password for your wireless connection.

If your asking for the username and password that you set in the modem configuration page more likely you are going to reset it and call your Internet service provider for the default username and password for your 2wire modem configuration page.

Jan 04, 2009 | Sprint PCS Merlin S720 Mobile Broadband...

1 Answer

Install 2wire 1701hg without installation CD


1. pull up browser(ie internet explorer)
2. type 192.168.1.254/setup or http://homeportal/setup in the address field. (click on i forgot my password if you forget it. then if you can't figure out the pw with the hint provided then go click on " i still forgot my password". you can then reset the system password)
3. setup your 2wire 1701 page, double check if key codes are there. it should be 522P-22P4-6262-22AT-F2NV
4. In time zone page, just choose the one then click next.
5. setup connection info page, just make sure the username is your primary email address with your ISP and also the correct password. fill out the username and password and confirm password fields ONLY then click next. And you're DONE!

you just have to wait till it successfully establish a connection.
if you're still having problem after doing that maybe twice or more then i suggest giving your ISP a call. they can also send you the 2wire cd if your ISP supports 2wire modem. AT&T does.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Dec 06, 2008 | 2wire (1000-100052-000) 802.11g/b Wireless...

1 Answer

Password and username setup


hi merrynlord to connect a bullion to bogpond you must enter the modem set up you do this by opening an internet browser IE or Firefox for instance then type in the address of the modem that should http://192.168.1.254.
Once this is done you will have to enter a user name and password if you changed this when you setting up for supernerd then you will have to use the one you created, if not then the default is
user = admin password = password.
on enter these you should then get a page with a menu on the left, here click on quick start, click
PPoA then enter 8 for VPI and 35 for VCI....altho these settings should already be in there...so baically check them, leave NAT enabled, leave the IP subnetmask and DSN all blank, then where it says username type in your new Username from bigpond and the new password. click apply then click save, and your modem should then connect to bigpond and get all the settings it requires.
If this doesn't connect you let me know.

Oct 08, 2008 | Computers & Internet

Not finding what you are looking for?
Siemens SpeedStream Modem (4100) (SS4100) Logo

Related Topics:

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18385 Answers

john smith

Level 2 Expert

381 Answers

Are you a Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...