Question about GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

DPGT750GCPL heat issue

Good evening,
I was wondering if you are possibly familiar with the GE profile harmony gas dryers? The motor/drum runs flame ignites and then shuts down after about 215 or 20 seconds. After a minute it will re-ignite and seems to go through this sequence over and over. vent is clean, also the drum speed seems to slow down and then return to normal at times. I opened it up...many screws and checked the gas valve coils. All 3 have the same resistance value. glow coil works. 
Thanks much
Jason

Posted by on

  • Jerry May 11, 2010

    Hi Jason, I was wondering if you know about the "Service Mode" in the Profile series?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 923 Answers

What do you mean by "215 or 20 seconds"?

Posted on May 11, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ge dryer model dpgt750ec1pl is running but no heat i was wondering if this style dryer is suppose to show some fault codes i thought it was the heat assembly but since itsnot showing any codes i thought...


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101./
';
][\][
\

Apr 25, 2011 | GE Profile Harmony DPGT750EC Electric...

1 Answer

G.E. Profile Harmony Dryer heats then won't heat


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Oct 10, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile gas dryer, DPXB515, no heat and no drum spin


the humimg you hear is from the motor,check the blower wheel that is below the lint filter,if a sock or something gets sucked into the blower the motor can't spin,check the belt,if it is jamed the motor can't spin,if these things check good you have a bad motor

Nov 05, 2009 | GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

Dryer drum turns but no heat. Checked fuses and


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101
879hftg

Sep 27, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Harmony Elec. Dryer Blower Stops working or won't start up


Do this.

press "Home"
press "Help"
press both "My Cycles" and "Back" at the same time and hold them until service mode pops up.
It will tell you what's wrong.

Jul 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Harmony Dryer Drum will not turn


the inertia switch on the shaft of the drum motor has failed This will require removal of the drum motor

Jun 01, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Ge profile harmony gas dryer- no air flow in or out no heat


Replace the blower motor. Check condition of blower wheel and replace if found defective

Jan 16, 2009 | GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

GE Profile Harmony Dryer DPGT750EC Drum won't turn & no heat


i am sending you all the possibilities for your problem, check either of these causes ----and than let me know if it is solved----

Power from the house
Check to see whether there's power getting to the dryer. Is it plugged in? Check for blown fuses or tripped circuit breakers--your dryer uses two fuses or circuit breakers. The dryer could tumble but not heat if only one of the two fuses is blown. If you have circuit breakers, one of the two circuit breakers can trip, even if the two for the dryer are connected.


Heating element
Often a dryer heating element burns out, but doesn't trip the circuit breaker or blow a fuse. The heating element is simply a long coil of special wire. You can check it for continuity with an ohm meter. No continuity means the element is bad and you need to replace it--electric heating elements aren't repairable.


Thermal fuse
On many dryers, there's a thermal fuse mounted to the exhaust duct inside the back cover panel. The fuse--which is about an inch long--is usually embedded in black resin and mounted in a white plastic housing. If the fuse has blown, you need to replace it. (You can't re-set it.)


Wiring
A common problem is for the main wiring connection from the house, at the dryer, to burn and break its connection. Because the dryer can still tumble with partial power, the connection may be only partially defective. You may need to replace both the power cord to the dryer and the terminal block inside the dryer that the wire is attached to.

Jul 04, 2008 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Electric Dryer, Blower nt getting up to speed


On all the ones I've seen with this problem, they've needed a new blower motor. Don't take that as the golden answer because even G.E. tech support doesn't know. It could be the control board, but I haven't seen that yet. G.E. always recommends replacing the inlet thermister, which is accessed through a little cover on the back. Good luck & welcome to the wonderful world of complex electronic appliances. 

Jan 27, 2008 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750GC Gas Dryer Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Dave Harrison

Level 2 Expert

114 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

vince

Level 3 Expert

1216 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...