Question about Delphi SKYFi3 XM Radio Receiver

2 Answers

My delphi xm is frozen

The screen is frozen on checking media DELPHI  XM i have the same problem

Posted by on

  • 4 more comments 
  • Anonymous Jan 13, 2009

    I have the same problem. The radio is frozen with the words checking media. What's up with that?

  • dmcabee523 Jan 21, 2009

    I tried holding down the volume button and the mode button at the same time. No luck. Also tried holding them for 5 seconds, 10 seconds, and 15 seconds. Nothing.

  • Anonymous Feb 14, 2009

    I have the same problem - the media searching comes on and no luck with the volume/mode process

  • slycommander Mar 19, 2009

    I have the same problem. Holding the volume and the mode button doesn't help.

  • wncash01 Mar 23, 2009

    gets stuck on "checking media" screen and teh #s at the bottom are 22.30

  • Anonymous Mar 29, 2009

    It worked with mine
    Thanks

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold the up volume button and the mode button at the same time. I have to do it almost every day. This is only a problem when using the car kit. No problem at all when using with portable kit or home kit.

Posted on Feb 15, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold the volume button down and press the mode button at the same time.

Posted on Dec 25, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: my delphi xm is frozen

My radio was stuck on "scanning media" and the regular reset (volume up and Mode) did not work.
Nothing that I did, fixed it...
I called Delphi and they said...
(1) Put radio in it's cradle, press Volume UP/Mode buttons for 3 seconds until it resets.
(2)Then when the "scanning media" message appears press up arrow, down arrow, up arrow.

My delphi screen unlocked. I LOST everything that I had recorded, but that was fine with me.

I had to update the firmware and everything is working fine.

Losing all my recorded songs was much better than having to send in my radio!

Hopefully this will work for you!
Delphi was extremely helpful and very nice so don't be afraid to call them if this doesn't work!

Posted on Oct 10, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an older model radio.. Delphi Roady 2.. gets powe to the docking station to the removalable unit but screen display will not light up.. any suggestions???


Probably the cheapest solution is to buy a used Roady2 off online bidding service like ebay and then pay the $15 to XM to switch radios. Delphi no longer makes Roady2. Probably could not repair for a cheap as you can buy used radios (around $25).

Nov 27, 2010 | Delphi Roady2 SA10085 XM Radio Receiver...

1 Answer

Skyfi3 freezes up on checking media


common problem! Press the volume UP and the Power button at the same time and it will go off. Go to the Delphi/XM website and upload/download the latest FIRMWARE and upgrade it. Then, call the 800 phone number for Delphi and they will tell you a secret master reset you have to do once or twice, and it will cut down the number of lockups during checking media by quite a bit. Also, do not use a Micro SD card larger than 2MB as well. Good luck, and let me know how it goes for you.

Aug 06, 2010 | Delphi SKYFi3 XM Radio Receiver

3 Answers

My unit starts up and just says at top "Checking Media" can not use any buttons, just frozen!


Take the sd card out, reboot by holding volume up and menu at the same time for 5 secs, wait for it to fully boot into the music, then put the sd card back in.

Oct 26, 2009 | Delphi SKYFi3 XM Radio Receiver

1 Answer

When i plug my xm player in it gets stuck on media


Mine got stuck like that too. For a while it was possible to hold down the volume button and the mode button at the same time and it would unlock. But now that doesn't work. The Delphi tech support guy said I need to do a firmware update, but that isn't working either.

Oct 05, 2009 | Delphi SKYFi3 XM Radio Receiver

1 Answer

Ipod shuffle, Xm reciever, Fm modulator


Yes it Does. The Ipod will not work in this Application. The FM Modulator is Programmed to Accept only Certain Connections. Please Rate My Response! Thanks!

Jan 31, 2009 | Apple iPod shuffle Second Gen. Silver (1...

1 Answer

Delphi MyFI


I have the same problem, and only the same few channels are shown on the channel access screen and they all have + signs.

Aug 21, 2008 | Delphi MyFi SA10113 XM Radio Receiver with...

6 Answers

My delphi xm is frozen


My radio was stuck on "scanning media" and the regular reset (volume up and Mode) did not work.
Nothing that I did, fixed it...
I called Delphi and they said...
(1) Put radio in it's cradle, press Volume UP/Mode buttons for 3 seconds until it resets.
(2)Then when the "scanning media" message appears press up arrow, down arrow, up arrow.

My delphi screen unlocked. I LOST everything that I had recorded, but that was fine with me.

I had to update the firmware and everything is working fine.

Losing all my recorded songs was much better than having to send in my radio!

Hopefully this will work for you!
Delphi was extremely helpful and very nice so don't be afraid to call them if this doesn't work!

Jul 10, 2008 | Delphi SKYFi3 XM Radio Receiver

1 Answer

Delphi Roady XT Radio won't turn on


You need to replace the transformer that plugs into the wall.

Dec 17, 2007 | Delphi Roady XT XM Radio Receiver

3 Answers

Delphi Roady XT Quit Working


Chances are it's not picking up the XM signal. First, contact XM to resend your setup. if that doesn't work check your antenna connections.

Oct 31, 2006 | Delphi Roady XT XM Radio Receiver

Not finding what you are looking for?
Delphi SKYFi3 XM Radio Receiver Logo

Related Topics:

631 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delphi Audio Players & Recorders Experts

John
John

Level 2 Expert

509 Answers

xxxxxx xxx

Level 3 Expert

4807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Delphi Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...