Question about Kenmore 40494 / 40495 / 40499 Electric Single Oven

1 Answer

Oven error code

The oven will not work. It beeps constantly and has an error code of F7. What does that mean?

Posted by on

  • 1 more comment 
  • david dickerson Apr 12, 2007

    none

  • david dickerson Apr 12, 2007

    I took off the face plate and cleaned the connections with some contact cleaner. Then I dried it all with some canned aired. The only connection I undid and reseated was the ribbon cable. It's been a few weeks a several batches of cookies later and all is well. Thanks for the support!

  • Stove2 Nov 13, 2007

    I was using by broiler and F7 popped up and the oven turn itself off. I could not turn it on again for a couple of hours. What is wrong?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 68 Answers

See my solution to OVENMAN/April 12, 2007. I have supplied my fix to over 650 individuals and have had a high reported success rate.

Posted on Apr 14, 2007

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My stove is beeping and is flashing F7. What does this mean, it is a built in oven.


Hello,

The F7 error code means that a function key on the touchpad is shorted or stuck, the F7 can be cleared by pushing the clear/off button,if the error code returns the touchpad would need to be replaced.


GENE

Sep 10, 2011 | GE Ovens

1 Answer

My Kenmore wall oven has a code F7 and is constantly beeping. What does this indicate?


Hello & Welcome to FixYa

F7 error code is displayed when the clock assembly/electronic range control (ERC) goes bad and needs replacement. Please get back to me if you have any other questions.


Kevin

Apr 11, 2011 | Kenmore Ovens

1 Answer

We had a power outage and when the electricity was restored the oven is displaying an F1 and F7 code and is beeping the alarm, how do i stop this?


Hello, the F1 error code means internal logic failure (monitoring function) it sounds alarm and inhibit cook mode You can fix it by replacing the electronic range control (ERC)

F7 error code means the function key shorted for over 16 seconds, check for something pressing a key or preventing normal release of the key. You can fix it by replacing the electronic range control (ERC) if other component check normal.

Thanks

Jul 14, 2010 | Thermador CM302U Electric Double Oven

1 Answer

JKP15 Electric Single Oven: Oven keeps beeping with F7 error...


F5 Loss of relay drive circuit If this fault code cannot be cancelled, replace the oven control (also called clock or ERC).

May 07, 2010 | GE JKP15 Electric Single Oven

1 Answer

Oven shows F7 error problem with irritating beeping sound


F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

May 13, 2009 | GE Profile JKP56 Electric Double Oven

1 Answer

Oven emitted black smoke and F7 beeping on display


F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Mar 30, 2009 | GE Profile JK915 Electric Single Oven

2 Answers

Error code F7 keeps coming up, what does this mean?


F1 error and beeping. Don't bother getting GE out there. Cost me $90 to learn they don't make the clock. WOuld have been $500+ for the control panel anyway. Better off just buying a new one. Planned obsolescence I guess. I won't buy GE again.

Mar 16, 2009 | GE JKP27 Electric Double Oven

Not finding what you are looking for?
Kenmore 40494 / 40495 / 40499 Electric Single Oven Logo

Related Topics:

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

17155 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...