Durabrand 1905 maybe black box centered in lower part of screen
Just on certain channels there is a black box that shows up on the screen. it wll go away by pressing buttons on remote but will come back thought it was dish network receiver but moved tv to another receiver and still does it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You`ve mentioned that ON CERTAIN CHANNELS THE TV WORKS FINE, so your trying to say that not all channels THE BLACK SQUARE APPEARS IN THE MIDDLE O THE SCREEN... my be that black square is generated from the broadcast center. may be your unit is good. let me ask you how many channels that your tv works fine..?
go into your menu and find closed caption, someone has accidently set the closed caption mode to text, when the on screen display of channel or volume goes away the box appears. turn off the closed caption feature or switch it to something other than "text" mode, and your box will go away.
this is a common problem,the vertical hold has been damaged.dont leave the teli. on,the white line will burn the middle of the screen and leave a black mark. You need a new integrated circuit(i.c.) for vertical hold.
I just bought a used one and had trouble with the channels too. I finally figured out that if you press the +/- on the remote, it then lets you put in 2 digit number. I still can't get my vcr to work though. I have it on channel 3, but it says no signal.
The tv may a SAP circuit fault (Second Audio Program).
This circuit can mess up and cause some channels which are carrying SAP to put out the wrong language.
I've seen this happen a few times. AN IC may have gotten zapped when the transformer blew.
Possibly the microprocessor IC.