Question about Sharp AR-M237 Copier

1 Answer

I need to put in some new account codes and delete the old ones

I have a manual but it doesn't seem to tell me how to do this. Our account codes are 5 digits. I go to key operator mode and put in key operator number but am lost after that please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

You need to be in the ADMIN. to change / enter codes. There is a separate code for the ADMIN. Input that code and you can change, edit, add new codes. If the ADMIN code was not ever changed then it will be the default code in the manual. Be ready because the code is not where you think in the manual. I believe it is is the setting section or check management settings. The default is usually 000000 or 111111.

Posted on Jan 05, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Brother 9700 is not working. I had a message say that I needed to replace the toner cartridge, so I did. I put it in and now it doesn't work. The screen just says the "sleep" current...

This could be a multitude of things. You would need to do some more "troubleshooting" style steps and post results here in order for someone to define an area of trouble. First, remove the "new" cartridge you put in and "re-insert" the old one. Did the problem go away? - Then you have a faulty "new" cartridge. - remember new cartridges can have problems too. After all we're only humans, and we can make mistakes. That includes manufacturers. ;)
If the problem still persists, TOTALLY unplug system from the wall. Wait at least 5 minutes and plug it back in. Turn it on, and tell me what you get. If the screen still comes up with new cartridge in place, then refer to above actions and scenario about replacing new cartridge if different result is achieved once older cartridge is returned and new result occurs.
Please ensure that "ALL" doors, handles, locking mechanisms, proper seating of cartridges, drum, fuser, etc is done. Re-seat each and every piece to ensure that ALL of them are properly secure and seated as they should be.
Report back with what you find and we'll go from there.. :)

Sep 02, 2011 | Brother MFC 9700 All-In-One Laser Printer

1 Answer

Keep getting error message after installing SmarThru: "installation of smarThru is not completed. you need to reboot..." but rebooting doesn't help - why?

your computer is asking for the reboot to delete some files cuz the installation failed so it will never working that way try the manual installation if you can dont use the auto-run disc
rather when it tells new hardware found click on it choose manually then select the files according to printer model

May 23, 2011 | Samsung SCX 4521F All-In-One Laser Printer

2 Answers

Hi we have just installed a gestetner asm645 (i think thats its name), and want to delete the old companies accounts as when we try to scan something it says it needs a "senders" account to scan...

can delete user accounts under system settings. Press the button marked 123(where you get your meter reading). under system settings go to administrator tools and address book managments. can delete user accounts and create new 1's. Or you can trun the user authentcation off. Then no code is needed.

Sender - under system settings go to file transfer. input your smtp and managers account email. When programing user in address book look for add as sender and input the email address. When emailing you can select sender and destination. If the user is not set up as a sender the list will be empty and you would not be able to select a sender. set up a user (email) that any one can use.

Jan 21, 2011 | Gestetner Copier

2 Answers

I delete one of my user names and don't know how to get it back he has a print job waiting that I can not delete. I can not uninstall the printer either. It keeps asking for an adminestrative pass word but...

try switch to an account that have Adminstrative privileges, if your account is the only account and is Administrative the you have a serius issue about virus, the only thing to do is save your printing job, but also can try
go to start
then select switch user
(no log off because you close the progran until this keep telling you you have *program in use)
if you can get out with switch
then before the welcome window apear try pressing Ctrl+Alt+Del

then an window with an account name Admin and the free space to put an password you can try this to get into that account...

by default the Admin account it´s without pass...

try, if the problem don´t get solved then you need to go to control panel and user accounts, try to make an new account without pass and make it Administrative, if some how you can´t create an account and then appear an window telling you that you need Administrative privileges you are very ******* because the only thing i can think is format your pc...

hope this was helpfull

Jul 31, 2010 | Office Equipment & Supplies

3 Answers

My Cannon i860 is blinking an amber light five times and then returns to green then blinks amber five times and so on. What is this error telling me?

I too went through all the cleaning processes on my i860 with its amber light blinking five times to one of green. After all that time and effort, I ordered a new head, replaced it, put the old ink carts back in, and presto, worked like a charm. Don't waste time and money doing anything else.

Jul 25, 2010 | Canon i860 InkJet Photo Printer

1 Answer


You need to delete the old printer in the control panel of your computer. Once it is deleted and you connect your new printer it should see it and re install the drivers. Otherwise check in your control panel/printers and set the new driver copy 1, as the default printer.

Oct 02, 2009 | Kodak ESP 5 Printer

1 Answer

Sharp 5316E how to enter code

Did you mean the account control code ( 3 digits code ) ? If you forget this code, either you disable the account control mode or change the old user accounts. Here's how :

1. Enter the USER MODE PROGRAM by pressing and holding the Light key indicator ( the white half circle ) at the bottom left of the machine.

2. After the all the lights at the panel goes off ( except the quantity copy display, it will show 3 lines ). press 10 with the 10 key and START, change the value from 1 to 0 and press START again to save the value. THIS IS DONE TO DISABLE THE ACCOUNT CONTROL MODE.

3. If you want to show the user account and cange it to a new account, repeat the above step but enter 12 instead of 10 and press START. It will shows you your current user accounts ( up to 20 accounts ). If you still want the old user account, remember that code and press the light exposure key 1 more time withou holding it.

4. If you want to change the old user accounts, after the machine shows you the user acccount press START and input the new 3 digits code and START again.

May 26, 2009 | Sharp Office Equipment & Supplies

1 Answer

Printer will not print

Create a New User Profile like Test Account and try printing from that account and check if its printing from there..
How to Create a New User Account ?
Start>Control Panel>User Accounts>Create New Account it shoul be admin...
Start>Type User Accounts in Search>Click User Accounts>Manage Another Account Create New Account..
If its able to print fine in new account then that means the profile of your old account is corrupted..If its doing the same thing in new account also ..Reinstall the Printer driver in the following Method..
Disconnect the Printer
1.Click>Start>Control Panel>Printers and Faxes and delete the The Printer that you are reinstalling the driver for delete all if there are more than 1 printer of the same.
2.Go to Control Panel>Add/Remove Programs> Uninstall the Lexmark related Programs
3.Restart the computer
4.Start > Run > Type in "cmd" you will have command prompt Type this and hit enter "net stop spooler"
6.Click>Start>Run Type in "C:\WINDOWS\system32\spool\drivers" Hit Enter
7.You will have the following folder open rename the W32X86 folder to W32X86.OLD
8.Restart the computer
9.Insert the Lexmark CD and start installing the software Note : Connect the Printer only when the installation is prompted to connect..

This should defnitely take care of your problem..
Note if you are using vista try this first
Start type msconfig open that go to tools tab and disable UAC and restart and check..

Jan 28, 2009 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

I have a AR-M237 small copier and I need to put in some new account codes and delete some old account codes. I have a manual but it doesn't seem to tell me how to accomplish this. Please help.

You need to have the ADMIN code to access, change, edit, delete or install new codes. Look in the Management setting under user tools. Look for user codes or key operator codes. Defualt ADMIN code is normally 000000 or 11111, that is if the ADMIN code was not changed.

Dec 18, 2008 | Sharp AR-M237 Copier

1 Answer

Need service manual for C710.

Hi Matt, i'm not sure how you tell how much life is left, but i know that transfer belts on other laser printers usually go on working way beyond their (built in) redundancy counter. It may be possible to reset it with a service code which i will try and find for you. I have the same printer and have a number of new transfer belts for it so it might be eaisier (although not necessary) to just replace it. Maybe having put a new one in you could swap the old one back until quality gets too bad and then use the new one by which time i may have found a reset code. I can let you have a new one if it helps. Garry

Mar 04, 2008 | Lexmark Optra C710 Laser Printer

Not finding what you are looking for?
Sharp AR-M237 Copier Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts


Level 3 Expert

7993 Answers


Level 3 Expert

1362 Answers


Level 3 Expert

98879 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides