Question about Raritan Paragon UMT242 (p2-umt242) 42-port KVM Switch

1 Answer

UMT242/USTIP2 not accepting remote clients, local only

We are deploying the UMT242 and USTIP2 on our network with 2 user ports. IPs have been set and I can open the Raritan Remote Client. but i can only access the Admin part, all ports give an error saying This channel is not available. anyone have any suggestions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

I do not know this particular IP KVM but most IP KVM's use SIPPs that must be updated on the KVM when they are attached to the servers. Look for an option in the admin tools that say update SIPPs or update connection. You may also just have to double click on the list of connections to get it to update. This may have to be done at the console and not via remote.

Posted on Dec 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

8 Answers

Port Forwarding On Linksys RV016


it's a rather lenghty explanation so please go to this site and follow the instructions...
http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/

Robert

Please rate this solution ... thanks

Sep 08, 2008 | Linksys RV016 Router

1 Answer

I need rest i tried backside rest button but icant


Press and hold the reset button for about 20 seconds, it should reset.

Dec 27, 2012 | Raritan Computer DKX2-108-PAC - Raritan...

1 Answer

How to use switch?? this is the topology INTERNET->MODEM->ROUTER AS AP ->...


Switch learns network MAC addresses And controls the network packets to reduce broadcast packet traffic on your network !
INTERNET V MODEM V Back of router ethernet port 1 V ROUTER AS AP Wi Fi Back of router ethernet port 2 V Switch Port V V

-> STATION Client/ /CLIENT ' Local/Lan

or

INTERNET V MODEM V Could Place Switch in Here instead Switch Port V V V ROUTER Station V AS AP Wi Fi client V V Client/ Local/Lan

May 03, 2017 | TP-LINK TL-SF 1008 P 8-port 10/100 PoE...

1 Answer

We have a network that is split into 2. Example


Hi,I understood taht you have 2 n/ws.192.168.1.x haveing all static addrsss & 192.168.3.x have all dynamic address.

Sol:
There are many reasong, but we wil try to start with basic testing
  1. You can try with Ping, if it replying or request time out ..You might need to check your Windows firewall.
  2. Try the following commnd c:\tracert 192.168.3.x .let see if you can reach to mention network, try it as vice versa...
try above procedure & let me know if it work..

Please rate this , i f you like....

Thanks
Sandeep

Mar 09, 2011 | Microsoft Computers & Internet

1 Answer

Set up wireless security


1 On a computer wired to the SBG900 USB or Ethernet port, open your web
browser (for example, Microsoft Internet Explorer)
2 Type http//:192.168.100.1 and press ENTER to display the login window:
3 In the User ID field, type admin (case sensitive) and press TAB.
4 In the Password field, type motorola (case sensitive) and click Log In to
display the SBG900 Setup Program main window:
As soon as your network is operational, run the SBG900 Setup Program to:

"Wireless Network Setup"
For a LAN with one or more wireless clients, enable wireless security on the SBG900.

"Wireless Network Setup"
After enabling wireless security on the SBG900, as required on each wireless client:
> If you disabled ESSID broadcasting on the SBG900, set the client Network
Name (ESSID) identical to the ESSID on the SBG900.
> If you enabled WEP on the SBG900, set the client WEP key identical to the
WEP key on the SBG900.
> If you enabled Allow Only Listed Stations Access, be sure the MAC
address for each client is correctly listed on the SBG900.

Dec 22, 2010 | Arris SURFboard SBG900 Wireless Router...

1 Answer

We have a block of IPs from ISP that come into a remote site offering Fiber 8MB Down 2MB Up, rolled down to one allocated port on Cisco Router (ISPs). We have (2) Q-Bridge Wireless Bridges for Point to...


Hello admin620,

This is just a guess based on the given network design information:

The 3 LANS can use a single router at the local site (via NAT) which can be configured as a neighbor to the ISP's cisco router.

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Feb 06, 2010 | Connex Q-Bridge Wireless Ethernet Bridge...

1 Answer

Settings on Linksys router for the DCS 5220 to view remotely and settings on Securicam


Configuring your Linksys router for remote desktop is a task that's needed before you can access your computer from outside the network. If you plan to connect to your remote desktop machine from the Internet, you need to configure the router to allow traffic to the PC. Linksys is a common router used on home networks for wireless and LAN configurations. Configuring your router to allow port forwarding to a remote desktop only takes a few steps through the graphical user interface.
  1. tep 1 Open your browser window and type the IP address of the router in your address bar. This opens a window for the username and password needed for access to configure the router.
  2. Step 2 Click the "Applications and Gaming" tab on the opening screen. This opens a window with a list of ports of which you can open for access on your network.
  3. Step 3 Type "Remote Desktop" in the application textbox.
  4. Step 4 Enter "3389" in the "Start" and "Stop" port ranges. This port number is specific to the remote desktop application.
  5. Step 5 Leave the value of "Both" in the protocol listbox.
  6. Step 6 Type the IP address of the internal machine on your network. The IP address is the machine running remote desktop. When traffic from the Internet reaches the router, it forwards the request to this IP address.
  7. Step 7 Check the "Enabled" checkbox and click "Save Settings."
  8. Step 8 Close the browser window.

Nov 14, 2009 | D-Link DCS-5220 Network Camera

1 Answer

Port forwarding on dlink adsl2 router


Step 1. Before you open ports in your router, set the computer (or the device) which requires
ports to be opened for, with a static IP address. You can choose any IP address from the
range of addresses you are using on your local network, as soon as it is not used by any other
device. The default range is from 10.1.1.2 to 10.1.1.254. In our example we are using
10.1.1.99.
Windows XP: Control Panel > Network Connections > Local Area Connection > Properties >
Internet protocol TCP/IP > Properties
Windows Vista: Control Panel > Network and Internet > [Network and Sharing Centre] > View
Network Status and Tasks > View Status > Properties > Internet Protocol v4 > Properties
Select the “Use the following IP address” option:
IP address: 10.1.1.99
Subnet mask: 255.0.0.0
Default Gateway: 10.1.1.1 (your router’s address)
DNS: 10.1.1.1 and 61.88.88.88 (or whichever your provider is using)
Now open the necessary ports in your router and redirect the traffic to the 10.1.1.99 address.
Here are the steps:
How to open ports in your router Page 2 of 6
Step 2.
Open your web browser and enter the IP address of the router (http://10.1.1.1). Enter
user name and password (default username “admin” and password is “admin”).
Step 3. Click on Advanced at the top and then click on LAN Clients.
How to open ports in your router Page 3 of 6
Step 4
. You will need to add a LAN Client (the address of your computer or a device) into the
router before you can open any ports. Type in the IP address of the Computer/Device (the
one you assigned in Step 1). You can specify the name of this workstation under Host Name
(optional). Click Add and then Apply.
Step 5. Go to Advanced > Virtual Server (Port Forwarding). There is a list of pre-set ports in
the router which you can choose from.
How to open ports in your router Page 4 of 6
Step 5a.
If your specific application is not listed there, you can add the necessary ports
yourself. Select the “User” Category and click on Add button below.
Step 5b. Enter a name for this entry under Rule Name. Then select the necessary protocol. If
there is a range of ports to open, specify the starting port under Port Start and the ending port
under Port End. If you need to open just one port, specify this port number in all fields
including the Port Map. Click Apply.
How to open ports in your router Page 5 of 6
Step 6.
Go back to Advanced > Virtual Server. Under LAN IP select your LAN Client (which
you added in Step 4). Select the Category and the desired Rule or select “User” Category
and you should see the rule which you have created in Step 5b. Select it and then click on
Add > to move it into the Applied Rules section. Click Apply.
Step 7. To save the new settings into the router's memory go to Tools > System. Click on
Save and Reboot button. The router will save the settings and restart.

Jun 21, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

What are the Differences Between the FR114P and the Previous RP114?


# Better firewall functions # An improved user interface to get your network up and running quicker # A faster microprocessor (75Mhz) and 10/100 WAN port for better throughput/security # Remote management functionality for easy multi-site deployment # Includes a print server

Feb 19, 2006 | NetGear (RP114NA) Router

Not finding what you are looking for?
Raritan Paragon UMT242 (p2-umt242) 42-port KVM Switch Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raritan Computers & Internet Experts

Brad Brown

Level 3 Expert

17093 Answers

Mike

Level 3 Expert

4348 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Raritan Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...