Question about OKI Pacemark 4410 Matrix Printer

1 Answer

OKI Pacemark 4410 doesn't print it correct spots for some forms

I can print certain documents fine, but when i print other s the words don't line up in the correct spots on yhe forms.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 121 Answers
Re: OKI Pacemark 4410 doesn't print it correct spots...

I found the service manual for this, which should come in really handy for you when performing maintenance on your printer (which is most likely what you need to do to the printer) Funny thing is that there are a lot of people trying to sell these manuals, so I'd save this one for future use (it might not be on this link for long)

Posted on Mar 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Printer prints perfectly durin test print but

if the printer has a drum or a printhead... then that part is bad...

Dec 21, 2009 | OKI Pacemark 4410 Matrix Printer

1 Answer


run a diagnosis trest and a print alignment application to currect that. check the print roller for any particle that could be trapped inside.

Aug 18, 2009 | OKI Pacemark 4410 Matrix Printer

1 Answer

Printing too far to the left, the stops are set as far to the right as possible but the text is still printing too far left. rear feed.

I'm trying to print a letter and everytime I do it prints too far to the left and cuts off some of the print.

Jul 15, 2009 | OKI Pacemark 4410 Matrix Printer

1 Answer

Paper jam when there is no paper jam

R300 Epson stylus says paper not set correctly yet it is. Any recommendations

Jun 16, 2009 | OKI Pacemark 4410 Matrix Printer

1 Answer

I have an Okidata Pacemark 3410 and the alarm light is blinking and will not print. i turn on and off and the alarm light just comes back on.

Normal 0 This doesn’t help fix all printers because each situation is different and in most cases we don’t have enough information to determine the fix. So hope this will provide some help.

Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Dec 29, 2008 | OKI Pacemark 3410 Matrix Printer

1 Answer

Oki Pacemaker 4410

I assume you are trying to use the front path? If so simply press PARK and then press the PATH button to change it back to FRONT FEED.

When it runs out of paper it changes paper paths automatically looking for more loaded paper (AUTO-PATH feature).

Anyway, that's what happened to us.

Aug 08, 2008 | OKI Pacemark 4410 Matrix Printer

1 Answer

OKI Pacemark 4410 Problem

Unit requires service, this is a valid error. Blown fuse on PMA PCB.

Feb 07, 2008 | OKI Pacemark 4410 Matrix Printer

1 Answer

3410 Oki printer

If your print fades in then out every 5-6 lines, your platen probably has flat spots on it. This can be caused when someone forget to perform an alignment on a PH.

To run a test page you can power off the printer. Hold down the LF key and power on at the same time, this will print a self test.

Feb 04, 2008 | OKI Pacemark 3410 Matrix Printer

1 Answer

Oki pacemark 3410

Is the operating system Unix?

Oct 31, 2007 | OKI Pacemark 3410 Matrix Printer

2 Answers

Abnormal printing with continuous tone

this sounds like it is doing something called a "hex dump" basicaly printing all ASCII characters. okis tend to do this from time to time if l;eft on for a significant period with no data sent to it. the only advice given by oki is to switch it off when not using it unfortunatly Hope this helps Cops

Oct 08, 2007 | OKI Pacemark 4410 Matrix Printer

Not finding what you are looking for?
OKI Pacemark 4410 Matrix Printer Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Printers & Copiers Experts


Level 3 Expert

1113 Answers


Level 1 Expert

38 Answers

Dominion Computer...
Dominion Computer...

Level 2 Expert

269 Answers

Are you an OKI Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides