Question about Sony Handycam CCD-TRV608 Camcorder

1 Answer

Tape won't eject from CCD-TRV608

The tape won't eject from my TRV-608. When I press eject tape come up halfway and then goes back down showing codes 31:20 then 31:22

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

There is a little plastic piece on the tape and it is getting stuck, you have to maually move this piece, witha paper clip or something else. it might break the piece off, but that is the only way I know to get it out.

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a tape in my Sony dcr-trv 350. It will not eject out for me. Door will open but tape will not come out. I can still record on my tape. How can I get this tape out? I don't want to loose what I have...


the camera has been dropped
or pressed by a heavy object or person

open the door
put down on the tape
move back and forth with significant pressure
caring not to destroy the eject lock mechanism
do it several times

I had the same problem with my sony

Nov 03, 2009 | Sony Handycam DCR-TRV350 Digital Camcorder

1 Answer

My tape will not eject!!!


u must to open ur camera and eject motor u put 3 dc volt then it eill eject and clean all connect then fixit and try

Jul 02, 2009 | Sony Handycam CCD-TRV107E Camcorder

1 Answer

DVR TRV-27 is showing error C:32:11


The problem is a rubber tape tension roller. Simply eject the tape, look inside where the tape goes. You will see a black rubber cylinder that may have a white plastic tube protruding. If you have long tweezer or a hemostat remove the plastic tube which hold the rubber tensioner in place, then remove the rubber tension cylinder. Clean the shaft of the black rubber tensioner with alcohol on a q-tip. Replace rubber tension cylinder and plastic tube.

Also, the tapes can cause the problem. This process is possible by one person, but you may need another person or have three hands. The C:31:23 is tape tension error. The tape has become stuck. Simply eject the tape. Holding the tape upside down, pull back on the tape cover release slide on the left side of the tape, now take the hemostat and push the tape release tab, located opposite of the tape cover, push this tab down and back toward the back edge of the tape. Now while holding both those release levers, take a pencil and wind the tape past the bad spot or until the tape winds freely.
I did both of these and was able to use the camera again and view all my tapes!
Good luck and QUIT SPANKING YOUR CAMERAS!!!!

May 01, 2009 | Sony Handycam DCR-TRV27 Mini DV Digital...

1 Answer

Tape will not eject


If you remove the power while the basket is halfway up, you should be able to remove the door. Then look to see if the reels are turning when you try to elect the tape. The error code you are getting indicates the reels are not turning for some reason. You can ssist the reels turning as the tape is ejected if you have a small plastic pick or a toothpick into the reels to assist the reels turning and tehn you may be able to remove the tape.

Dec 18, 2008 | Sony Handycam CCD-TRV608 Camcorder

1 Answer

Hi 8 Tape Will Not Eject


If you remove the power while the basket is halfway up, you should be able to remove the door. Then look to see if the reels are turning when you try to eject the tape. You may be getting an error code that indicates the reels are not turning for some reason. You can assist the reels turning as the tape is ejected if you stick a small plastic pick or a toothpick into the reels to assist the reels turning and then you may be able to remove the tape.

Chris (ziraffa)

Oct 17, 2008 | Sony Handycam CCD-TRV608 Camcorder

1 Answer

Old Camcorder & new computer


it might not be campatiable with windows vista,i have windows vista on my laptop and i have to watch out and make sure it works with vista,some do ,some don't.

Sep 21, 2008 | Sony Handycam CCD-TRV608 Camcorder

1 Answer

C 31:20 is my special message


Take the battery out and turn selection switch to camera and then turn it off. Put the battery back in and its working again.
if that doesn't work try
Try smacking the side of the camera relatively hard with the palm of your hand. Eject the tape and reinsert. You may need to do this a couple of times.

Feb 11, 2008 | Sony Handycam CCD-TRV608 Camcorder

1 Answer

Eject Button does not work


Take the battery out and turn selection switch to camera and then turn it off. Put the battery back in and its working again.
if that doesn't work try
Try smacking the side of the camera relatively hard with the palm of your hand. Eject the tape and reinsert. You may need to do this a couple of times.

Jan 10, 2008 | Sony Handycam CCD-TRV608 Camcorder

1 Answer

Tape will not eject


This mceahnism is now defective and only a skilled workshop technician can do this job. If you need the service manual and parts we can help. Siva videolabs@gmail.com

Jan 03, 2007 | Sony Handycam CCD-TRV37 Camcorder

Not finding what you are looking for?
Sony Handycam CCD-TRV608 Camcorder Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

96627 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...