Question about Mitsubishi WS-65813 65" Rear Projection HDTV

1 Answer

MITSUBISHI 65813 SCREEN GOES TO BLUE ABOUT 2 MINUTES AFTER TURNIN

THE TV GOES TO BLUE AFTER SHOWING PICTURE FOR MINUTE OR 2.I TURN IT OFF THEN BACK ON PICTURE COMES BACK ON. THEN SOMETIMES IT STAYS ON BUT THE PICTURE IS VERY CHOPPY NOT CLEAR. PLEASE HELP. MITSUBISHI 65813.the picture was real good until it started staying on now not to good.choppy not stable david thanks

Posted by on

  • bonniedogg Dec 27, 2008

    I think I have the same problem (posted 12/26/08). Mine stays on for a while when I turn it on the first time of the day then it 'blinks out' to a gray-black screen with horizontal lines about 1.5" apart moving up and down (kind of choppy). The little green light does NOT blink. If I turn it off and then turn it back on its fine again for a while (anywhere from 2 to 20 minutes) until it does it again. If you find a solution to your problem, please let me know.



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Try to look at its circuit board and look for some cold solder

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ws48513


CONVERGENCE PROBLEM..FIND HONEST TV TECH. MAYBE A $300 REPAIR

Nov 12, 2013 | Mitsubishi WS-65813 65" Rear Projection...

1 Answer

The screen turns blue after about 2 minutes of turning on the TV


Sony TVs has an Optical Block issue. If there is an issue with the optical block, then there will be green, blue patches or tint on the TV display. Try resetting the TV to the factory settings and try Power resetting the TV. Turn Off the TV and remove the power plug from the wall outlet for 1 minute and reconnect it and check the operation. If the issue still persists, then TV may require service. You can contact the Customer relations team and check for the available options. Sony had repaired free of cost for such issues. Hence, contact the customer relations.

Jul 25, 2010 | Sony KP-57HW40 57" Rear Projection...

1 Answer

My TV Screen turns green or blue after 10 minutes of the tv on


You have a chip that is overheating due to heatsink coumpound being dried up. You need to find that chip and heatsink and apply new compound to both parts.

Mar 18, 2009 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Mitsubishi VS 50805/60805 blue/yellow shadows on screen


Ok try turning the tv of for 40 minutes by the power point and back on. that way it will reset picture - and should go back to normal please let me now how this goes ((By a rating

Make sure you un plugged it by the power point for the 40 minutes
also make sure there is no speakers or anything magnetic within 60cm's of the tv this can also cause the picture to have strange colors in the screen - if that happens simple do the above

Aug 17, 2008 | Mitsubishi WS-55807 TV

1 Answer

Screen goes crazy after about 1 minute


try it on tuner mode to seperate the fault from video to rf input,if gone the video pc board is at fault.

Aug 11, 2008 | Samsung HLN467W 46" Rear Projection HDTV

1 Answer

TV screen goes blank but power stays on


Sounds like the CRTs are going into protective blanking due to the vertical output ic needing to be resolderd. Try resoldering the vertical IC that may possibly fix the issue.

Jun 15, 2008 | Mitsubishi WS-73713 73" Rear Projection...

1 Answer

Mitsubishi WD-52327 Picture flickers and goes blue


In your case I've seen this and it was a electrical issue between the DLP fan and board. The tv could have a problem with the digital tuner and not kicking a code due to low voltage ... it isn't expensive to fix, just hard to diagnose.

Do you smoke? The fans suck in smoke and it gets tar build up on the connections and that causes this in some cases too.

Dec 28, 2007 | Mitsubishi WD-52327 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65813 65" Rear Projection HDTV Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72168 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...