Question about Vacuums

Open Question

1993 chevy silverado 1500 fails emission and has error code of 32 this refers to EGR issue but i need a vacuum diagram to figure out if any hoses are missing has anyone had any dealing with egr fail code?

Posted by on

1 Suggested Answer

reddevil6
  • 1673 Answers

SOURCE: 4.3 amp Kenmore canister vacuum power switch has failed

You did not give the complete model number, but you can go to sears.com, click on parts and put in you model number. You will get links to click on, click on the cannister one and you get a picture breakdown and a parts list, you can also order after choosing the part you need.

Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the dc47 and the suction keeps flipping on and off. Why??


Hello, this is Ava with Think Crucial.

You may need to check for blockages of your wand and hose. Remove the wand and hose from your cleaner when checking for blockages and any damages. Make sure to turn off and unplug your vacuum from the power before doing this. Please refer to this troubleshooting guide for more information on how how to fix the issue:

https://www.dyson.com/support/dc47/dc47-animal/my-machine-is-not-working/machine-not-sucking-or-picking-up-as-well-as-usual


You can purchase a wide variety of high quality Dyson replacement parts for your Dyson vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/search?type=product&q=dyson

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Nov 21, 2016 | Dyson DC47 Animal Canister Vacuum Cleaner

1 Answer

Need complete detailed vacuum diagram for 1995 460 Ford fuel injected


1993 460 vacuum diagram - Ford Truck Enthusiasts Forums

www.ford-trucks.com/forums/1159717-1993-460-vacuum-diagram.html
May 4, 2012 - 1993 460 vacuum diagram Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460) ... The vacuum diagrams for most of the EFI engines are pretty simple since... 1995 Lincoln Continental (project car), 1994 Taurus LX (daily driver) ... All the Forddiagrams I have seen have the CCD in 1994 including mine (no ... De-smoging EFI 460
Apr 24, 2012
5.0 EFI Fuel Injection issues
Feb 8, 2012
More results from www.ford-trucks.com

Vacuum Diagrams - AutoZone

www.autozone.com/repairinfo/.../repairGuideContent.jsp?page...

AutoZoneFord Pick-ups and Broncos 1987-1996 Repair Guide ... 14: Vacuum diagram-19955.0L engine, Bronco models ... 15: Vacuum diagram-1995 diesel engine.Missing: injected

Jan 20, 2016 | Vacuums

1 Answer

The hose is blocked, how do I get it off to unblock?


Hey, this is Tristan with Crucial Vacuum,

In order to remove the hose to start unblocking it, do the following:
1. Put the vacuum in the upright position
2. Press the release button of the telescopic wand and remove the handle from the hose
3. Push the hose elbow downward into the catch hooks.
4. Undo the suction hose by twisting it at the elbow.

If the blockage isn't in this location you can do the following to search further for blockages:

5. Open the service flap on the back of the vacuum.
6. Unscrew the screws and pull the cover free.

Below I have attached a link to the users manual for the Miele S7210. You should refer to page 30 to view the diagrams pertaining to my suggestions.

http://www.sylvane.com/media/documents/products/miele-s7210-twist-upright-vacuum-users-manual.pdf
---
You can purchase replacement parts for Miele direct from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

http://www.crucialvacuum.com/miele.html


I hope this was helpful! If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Tristan Clausell
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Oct 14, 2015 | Miele S7210 Bagged Upright Vacuum

1 Answer

G4. Why does it only seem to have suction with the hose detached?


Hey, this is Jeremy with Crucial Vacuum,

I am sorry to hear that you are having issues with your Kirby G4. It sounds like your problems might stem from one of two areas:

1) Your hose may not be attached properly and allowing for air to enter the hose at the point of attachment.

2) The vacuum bag may not be properly attached to the hose connector.

Below I have attached a link to the users manual for the Kirby G4. You should refer to page 9 and 20-21 to view the diagrams pertaining to my suggestions.

http://kirbywhq.powweb.com/manuals/G4/8D4538EC00E93846200D614F7C499B59/G4%20Manual.pdf

You can purchase replacement parts for Kirby direct from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

http://www.crucialvacuum.com/kirby.html


I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Jeremy Lerner
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Aug 18, 2015 | Kirby Vacuums

2 Answers

I need a hose diagram


Hi, it's Ambrai from Crucial Vacuum.

I have inserted a link that will direct you to your ProHeat's User Guide: http://www.bissell.com/assets/0/132/134/228/37c9e5f4-f551-4b35-917f-33c0e7055ea9.pdf

I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Ambrai Brown
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

May 13, 2014 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

Hoover U5750-900 hose suction not working


Sounds like the section from the hose to the bag may be plugged. Or you may be losing vacuum due to a leak in the hose. Hope this helps.

Mar 03, 2014 | Hoover U5750-900 WindTunnel Bagless...

1 Answer

Can not figure out how to hook up the" U " tube that comes with the vacuum in order to vacuum the fabric sofa. Can you help?


Hi there,

The U-bend is an air duct, which is designed to be removable to allow you to easily check for blockages. For information on fitting it to the cleaner, please refer to the user guide supplied with your cleaner. If you don't have this to hand, you can download a copy here:

http://media.dyson.com/downloads/us/floorcare/manuals/dc14_opmanual_usa2007.pdf


Please see page 11 of the guide linked above - the diagram above the title 'U-bend Inspection' should help you resolve your issue.

If you need any further guidance, please get in touch with us directly - one of our experts will be happy to talk you through the process, and answer any other queries you may have. You can call us free on 08002980298 (UK), or 1866MYDYSON (US).

Kind regards,

Jack
Dyson Online Customer Support

Sep 06, 2011 | Dyson DC14 All Floors Upright Vacuum...

1 Answer

I am having problems figureing out my hose diagram on my 1987 ford mustang 5.0 can you send me pics of where they go specifically


Shy503p,
You will find the vacuum diagrams you desire in a Chilton's model specific manual for your 87 Mustang (just make sure the one you buy does in fact include the vacuum diagrams). You may also find it in a general domestic Chilton's that covers your year (I have one for up to 88 domestics) and I will check it for your diagram when I get the chance to dig it out.
Let us know how you fair, and Good Luck.

Mar 10, 2008 | Vacuums

Not finding what you are looking for?
Vacuums Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...