Question about Hanns.G Corporation JW-199DPB 19" LCD Monitor

1 Answer

Hanns g JC199D will not turn on, comp is on, try to turn monitor

Yea i went to bed one night, computers were on and working fine. I woke up in the morning and theywere off. I turned my computer on fine. I can hear the fans working and the lights work on the computer. BUT... when I turn on my monitor, it goes green, then back to amber in like 3 seconds and says"no signal" . Please help if you know how to answer this problem.


Aggravated in Idaho

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

No signal indicates a couple things... i suspect your computer isn't even booting up. reboot the computer while tapping the F8 key.... you should see writing on the screen... boot to safe mode. after it sucessfully boots up... reboot again... should be fine.

Robert

also is that an add on video card ?

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers for Hans.G JC199D monitor


Question: Does Hanns.G provide Windows (or other) drivers? Answer: Answer: No Operating System specific drivers should be necessary. Hanns.G monitors comply with DD2B plug & play standards.
In other words hans doesn' t need drivers, it is plug and play
Terry

Jan 28, 2015 | Computers & Internet

1 Answer

Hanns-g JC199d monitor displays 2 messages periodically


install an AGP card into an AGP slot because internal display card does not support high resolution because of insufficient memory . use 8X AGP card for better result . then you can see high resolution ,3D games ,and movies .

Apr 17, 2010 | Hannspree HANNS·G JC199DP LCD Monitor 19...

2 Answers

Monitor dead


Check your power cables properly and make sure it is attached. Check your power button, maybe you have pressed the wrong one.

Jan 03, 2010 | Acer AL1916W 19" LCD Monitor

1 Answer

My monitor doesn't display anything, though it's receiving input from the CPU. I know that input is being received because the monitor status light is green, and times out (turns orange).


Same thing happened to me! Went to bed last night, everything was fine. Woke up today, orange light came on, no display, slight flickering seen, but that's it. Cables and cords are fine, tried unplugging and plugging it back in, NOTHING. Totally dead. I'm guess off to buy a new one today. Typical made-in-China JUNK.

Jan 03, 2010 | Acer AL1916W 19" LCD Monitor

2 Answers

Screen went blank and orange light is on


fiona_sheeha, If ACER warranty service not an option, then unit will need local tech to troubleshoot unit's power supply/inverter circuit for possible COMMON and repairable printed circuit board fix. You must read more of my fixya profile and visit the web links you find there so you will know and understand what ALL your options are!!! Some units require less than $5 in parts to refurbish them to working status. Your "cold-cathode-fluorescent-lamp" backlit LCD monitor isn't any different than any other brand of monitor in it's basic operating principles!! I hope this helps. 12fixlouie

Dec 30, 2009 | Acer AL1916W 19" LCD Monitor

3 Answers

Phone won't charge or turn on


Try removing the battery and clean the contact's, then reinsert the battery and let it charge, if it do'es not begin to charge your adapter may need to be replaced, or your battery.

Apr 06, 2009 | Lands Phones

1 Answer

Mymonitor is black and the on button from the monitor is green and is flashing


i havent seen this question asked, and believe me i have searched. i have compaq presario, windows xp media edition 2005, 64 amd processor, model # SR2017CL, with HP 1703 17" monitor. Prob-put computer in hibernate mode other evening, without turning it off. when i woke up, screen had diagonal lines going across it. i rebooted, well manually restarted, since comp would not respond.
Message comes up white with black writing, essentially, prob with active desktop, restore or turn off. i tried to turn off and screen went back to diag. lines. looks like the horizontal hold of a tv screen is asque. tried adjusting monitor to no avail.
tried a few more times, was fine for a few mins then went to same thing. now when i turn monitor on it blinks red, blue, and so on.
just whole screen that color. so i am at the point where i dont
know if its the comp or the monitor. (i am quite a newby)
ty for any help you can give
ellie

Jan 30, 2008 | HP Pavilion F1703 17" LCD Monitor

Not finding what you are looking for?
Hanns.G Corporation JW-199DPB 19" LCD Monitor Logo

Related Topics:

801 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hanns.G Corporation Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Hanns.G Corporation Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...