Where exactly is the printhead on the Konica Minolta 1350W?

I looked at the manufacturer's web-site:
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=1350W

and you are correct -- there are drivers for 2000/XP, and for 95/98, but nothing for Vista nor Windows 7.

Find an old computer running Windows 2000 or XP, and connect the printer to it, and "share" the printer across your home-network.

Kindly replace its drum cartridge.

if it occurs during printing you have a dirty charge wire in your drum unit, there should be a way for you as the user to clean, it may have a charge roller which you cannot clean. if it occurs during copying then your **** glass is dirty under your adf (1/2" strip of glass) clean with soap and water or glass cleaner (no ammonia)

Hello sir; It seems like registration roller clutch defect, replace it!

your carteidge OPC duram is faulty .
so change cartedige

Go to printer faxes check and it might change the default setting and it might default Microsoft Office Document Image Writer. When you print make sure that you are printing to a right printer you can select the printer of your choice by clicking the down arrow. If you select the right printer and it did not print I suggest that uninstall the print driver to the control panel, add or remove and install a new printer driver. make sure set as a default.

If you have already replaced the toner cartridge as you stated, and the lines appear in the exact same locations as they did prior to changing the cartridge, then the problem is most likely the printhead ( laser ) unit.

Now when I say this, it does not necessarily mean the printhead is defective, it may simply be dirty, or have either dust, toner, or paper obstructing the lasers line of site with the photoconductor.

Remove the toner cartridge, use a flashlight to look into the unit, and try cleaning the printhead using compressed ( canned air ) air. Most of the time the obstruction will clear just by this. In some cases, the dirt on the glass is stuck, and must be wiped off with a soft, lintfree cloth, but try the canned air first.

Please comment after you have tried this and let me know how you make out.

Thanks, and good luck

If you're getting white lines, you are running out of toner, but if the lines are black, I believe the drum is the problem .Remove the OPC drum and check its surface for lines, if there are any lines, you can bet it will be printed on the paper.

Chip reset device for Konica Minolta Bizhub and CF imaging units
http://www.chipreset.eu

the problem it might not be the printer. I encounter this problem before. the solution is uninstall the print driver to the control panel and re install the print driver using the cd print drive or you can download to konicaminolta web site..

minolta printers work on "chips" if the chip atached to the cartridge is not original minolta you better change it.