Question about StarView SV211K 2-port KVM Switch

4 Answers

The box chorus codes??

Any 1 have the codes the channels are coming in but they are black
is the frequency rate changed???
i have emu turned on??

Posted by on

  • 13 more comments 
  • ciarand Dec 18, 2008

    i tried them mate and still nothing?? i have about 15 channels working so i cant understand y d rest of them are black??

    any further things i can try??

  • ciarand Dec 18, 2008

    im after doin a factory reset put in ur codes emu is on and still no results mate???anything else symbol rate 6875

  • ciarand Dec 18, 2008

    yes im in dublin and im chorus cheers mate

  • ciarand Dec 18, 2008

    5e01 chorus mate??

  • ciarand Dec 18, 2008

    i keep doin it but nothin got any other ideas are u sure they are the chorus dublin codes????

    normally my box updated itself and this is d first time this ever happened..its drivin me nuts haha

  • ciarand Dec 18, 2008

    ye thanx 4 ur help anyway

    if u get anything will u post it 4 me thanx

  • ciarand Dec 18, 2008

    i tried dat aswell mate and nothin i deffo need chorus codes

  • Anonymous Dec 21, 2008

    codes for the chorus box please help 

  • sammy120 Dec 25, 2008

    i have the box and am looking for the down frequency on ntl can u help me my email is

  • stevieg76 Dec 30, 2008

    i have a ntl pace box , ive had so much trouble with ntl in the past i cancelled the subsricption , anyone know how i can open up the channels again without going against my beliefs and resubscribing .

    happy new year to all apart from ntl

  • dick09 Jan 04, 2009

    looking for codes for chorus ntl in dublin the box

  • jgmjgm Apr 02, 2009

    need codes for chours on the digibox t system

  • Anonymous Apr 03, 2009

    starview box says data is being updated

  • darragh kiely Apr 03, 2009

    codes for chorus box

  • slekie Apr 04, 2009

    the box-t codes needed for clare area



4 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

*CHORUS* (5e 01)

00 = CE 19 2E 87 80 61 74 90

01 = AA 26 9E F2 E9 14 D1 AE

Posted on Apr 03, 2009

  • Alan Apr 03, 2009

    To enter the codes
    1 - Press menu
    2 - Press 1570
    3 - Make sure key emu is on
    4 - Enter nagravision
    5 - Make sure it says ntl at the top box, if not press right till it says ntl
    6 - Key number should be on 00
    7 - Go to key data and put this code in *******************
    8 - Go to key number and press right so its on 01
    9 - Press down so you are on key data and enter this code ******************
    10 - Press ok to save
    11 - All done

  • Alan Apr 03, 2009

    On no.5 obviously you would set it to chorus .


  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

This worked perfect thanks very much aldub {:
if anyone want to know how to get the menu up
to put in the codes press menu and the 1570 and
put theses numbers in under chorus and then i did a rescan
and they all popped up thank god {:

Posted on Apr 03, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This worked for me
thanks bud,
im in cork on cho**s

Posted on Apr 03, 2009

  • cummins_niam Apr 03, 2009

    thanks im in cork this worked for me


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 64 Answers

Hi try these
00- f2 d5 38 b1 df af cf 48
01-b8 4a bd 38 4b 27 47 a2

Posted on Dec 18, 2008

  • 4 more comments 
  • Rita May
    Rita May Dec 18, 2008

    hi have you tried to install them again and checked if your emu is on

  • Rita May
    Rita May Dec 18, 2008

    hi can you tell me if you are in dublin and is it the chorus codes or ntl

  • Rita May
    Rita May Dec 18, 2008

    sorry if it was ntl i could check for you keep trying

  • Rita May
    Rita May Dec 18, 2008

    sorry tried my tv and these where the only codes on the box sorry

  • Rita May
    Rita May Dec 18, 2008

    ok do you want to try the ntl codes you got nothing to lose they are

    00- b0 b8 4f 04 e6 5f 87 80

    01- a3 eb ec 07 d6 49 d2 eb

  • Rita May
    Rita May Dec 18, 2008

    if you have Missing channels you can try this.

    I have seen a few posts about channels missing when doing a full scan.
    Here's a little trick you can try that may help if you're having problems
    finding any particular channels or are missing channels:
    Try and determine the lowest transponder frequency that you can get a signal on.
    Look at the frequencies you already have on the channels saved so far and choose the lowest.
    Then in the installation menu select MANUAL SCAN and set that as the frequency.
    Make sure you can see a signal and scroll down to Network scan and change to ENABLE with the Right arrow.
    While still highlighted, click OK.
    Scanning should then begin. It will say 1/1 to start with but should then jump up to 1/?? (the ?? being 2 digits).
    Using this method my Starview indicated it scanned 56/56 transponder frequencies as opposed to 48 in Auto scan on one main provider.
    I also gained a few extra channels.
    The other transponders may have been picked up by scanning other providers.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Lost irish chorus stations on mmds t box, any ideas. thanks

sorry to dissagree with small6363 but the boxs are still working in ireland they have found a way of turning the emu off on the box nagra 3 is not in ireland if it was every box would be shut down go back and re enter the codes and check your emu if you can reflash your box

Feb 04, 2010 | StarView SV211K 2-port KVM...

1 Answer

Can get all channels but there locked

rob, all the sview 4 usb boxes are down everything u have done is correct but chorus have comrimised this version of the box sview 1, 2 and 3 are still workin

May 29, 2009 | StarView SV211K 2-port KVM...

2 Answers

Please new codes for starview box may 2009 the box/starview codes for ireland dublin chorus ntl no sports or movies working

first upate it from your pc with firmware v3.00 second press menu then type 1570 or what ever your number is to get into nagravision then go to SET DEFAULT KEY PRESS OK TURN ON KEY EMU .now exit back to tv it should say channel updating when it gets to %100

May 27, 2009 | StarView SV211K 2-port KVM...

5 Answers

Ireland Codes for ntl/chorus mmds for digivox T

picture but no sound (irish and virgin channels only) on my digivox-t digital receiver, any solutions

Mar 07, 2009 | StarView SV211K 2-port KVM...

1 Answer

Looking for codes for chorus dublin

press menu
go to systm info
koy in 1004
press nigravation
should see 5401 first box
second box 00
third box key in b0 b8 4f o4 e6 57 87 80
press ok
change second box to 01
third box key in a3 eb ec 07 d6 49 d2 eb
press ok
exit turn on emu
exit to installation install as normal

Dec 21, 2008 | StarView SV211K 2-port KVM...

11 Answers

Need new codes for 'the box' for CHORUS or CHORUS CORK

5E 01
AA 26 9E F2 E9 14 D1 AE.

NEW CODES FOR CHORUS AS OF APRIL 3RD.HOPE THATS OK FOR in cork so that should be ok for u jim.enjoy all

Dec 19, 2008 | StarView SV211K 2-port KVM...

8 Answers

Codes for the box t


HIT 1570



5E01 (STORE)

CE 19 2E 87 61 74 90

62 FA D9 F3 CE 05 FA 79


Dec 18, 2008 | StarView SV211K 2-port KVM...

1 Answer

Starview chorus codes please help emergency

they only changed the codes , I would say that by tomorrow it should be available , im in the same situation

Dec 18, 2008 | StarView SV211K 2-port KVM...

16 Answers

Starview codes Dec 18th

NTL DUBLIN THURSDAY 18TH DECEMBER 00 Code - B0 B8 4F 04 E6 5F 87 80 01 Code - A3 EB EC 07 D6 49 D2 EB Have fun ****

Dec 18, 2008 | StarView SV211K 2-port KVM...

1 Answer

Chorus Codes

I'm wi Virgin but might give U an idea :-

Subject: Star View 3 The Box Super when channels discappear ;o) 1. Press menu then Factory Setting & Enter code 0000 to reset. 2. Exit to main menu & enter 1570 to get into the CASS SYSTEM & turn EMU on 3. Reinstall channels (Goto Installation, Cable network (try TW first & if no channels try NTL then C & W and so on - I'm with Virgin & used the setings for TW) & Voila ;o) Nb: You may have to redownload channels so reconnect yr box to the computer & follow the link below & press download !!!

Nov 10, 2008 | StarView SV211K 2-port KVM...

Not finding what you are looking for? StarView SV211K 2-port KVM Switch Logo

Related Topics:

2,617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18419 Answers

Alun Cox

Level 3 Expert

2678 Answers


Level 2 Expert

15 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides