Question about Projection Televisions

Open Question

RCA HD52W67 Picture too big for screen

I got this tv from a friend, and he didn't have the original remote for it, or the owner's manual. The picture is too big for the screen, and the picture is cut off. I can't see the subtitles in a movie, sports scores, etc. It is really annoying, and I would like to know if there is any way to fix it. I have tried adjusting the autoformat and all that, but when the autoformat is off, the whole picture just moves up about 5 inches, and then i can see the bottom of the screen, but the top is cut off even more. I'm not sure how to fix this...I am using a universal remote.

Posted by on

4 Suggested Answers

experttv
  • 203 Answers

SOURCE: JVC av-56pw30 Picture Adjustment

Sounds like you have a convergence problem and the set will require repair. This repair will run somewhere around $400 if you have a good company complete the repair for you.

If you are interested in doing this repair yourself you will need to be able to use a meter and solder VERY well.

If you have more questions please email me.

Thank you,
Tim Nolan
Experttv@comcast.net

Posted on Oct 12, 2008

CAYPIANAN
  • 227 Answers

SOURCE: Picture jumps

you might have bad caps or the vertical output integrated circuit, try to locate the vertical ic and check the surrounding areas for bad capacitors.


good luck


caypianan@yahoo.com

Posted on Oct 23, 2008

  • 1 Answer

SOURCE: The top of my picture is cut off.

Change the video output to wide screen

Posted on Oct 15, 2009

jhinsincity
  • 616 Answers

SOURCE: cuts peoples heads off, doesnt autoformat

uncheck format , format manually. use "full" or "panorama" setting

Posted on Jan 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an older model rca rear projection tv. The problem with the tv is that the picture bends into curve after about 5 minutes after it has been turned on. Please help.


Check the convergence IC's for cold solders, check for leaking capacitors in the area. Check the voltage regulator with a Variac.

Usually these sets just need the 2 big convergence IC's replaced with new ones. Clean all 3 picture tube lenses, mirror and screen. Get the original RCA remote that came with the set and MANUALLY align the convergence.

Rarely the bow on the bottom of the screen is not repairable.

Jul 18, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...

8 Answers

I HAVE 52" RCA TELEVISION.MY GRANDSONS WERE WATCHING IT USING REMOTE CONTROL.THEY DID SOMETHING;WHICH HAS CAUSED THE SCREEN TO SHRINK.PICTURE NOW HAS APPROX. 4" TO 6" ON ALL...


Can you please give us the exact model of this TV set so we can help you better..by the way did you try resetting the settings of your TV using the remote I believe there's an option there to reset the settings of the TV set....

Oct 21, 2008 | RCA Projection Televisions

1 Answer

RCA hd52w67 analog convergence problem.


with Tv off press and hold ch- and vol- at same time untill tv turns on then release and you should be in factory settings service mode.

May 26, 2010 | Projection Televisions

1 Answer

52" hdtv rca hd52w67


check that board where you replace the fuse on the back look very close at the transformer the big black one and check the soldering it is cracked resolder it and you should be ready to go.. just look very close they are smalllllll cracks need good light.. thats what i had on mine and works good..
'

Apr 08, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

I have an RCA HD52W67 and it just started to have


I'm having the same problem with my RCA HD52W67 rear projection TV and I've notice this problem is listed with my other owners of this product. I have no experience with fixing electronics. Sould I try this myself or take it to an expert? Has anyone fixed this problem? What is an estimated cost involved, if I take my set to an expert? Any advice with the HD52W67 is great appreciated.

Mar 19, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

I have an rca model hd52w67 tv and there is a problem with the picture. the picture has a red and green picture that don't allign by about an inch. I think it is in the picture guns but i cant find a...


Do not align the guns! they are located facing up toward the mirror; they are picture tubes! covered with big glass lenses! heavy!
instead look for a red/green/blue adjustment knob on the set's front; the buttons should say: convergence or, crosshatch push the crosshatch button: once you have three vertical lines crossing three horizontal lines; just merge them using the other R/G/B knobs untill you have one white vertical line and, one horizontal line crossing in the center of the screen.
(you may have to find the controls on the remote using "setup")

Feb 11, 2010 | RCA Projection Televisions

2 Answers

Picture too big for screen


on your remote push the arrow key to the right or left side. this should change format and go into customer setup and turn of autoformat

Aug 31, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

Hdtv


you may have to change format.. also you can turn off autoformat off in the setup

Jul 04, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

Picture to big for the screen


sounds like you have the zoom feature on. use the left and right arrows to set the picture.It will also set the picture format also.

Nov 07, 2007 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...