Question about Proview PL926WBi 19" LCD Monitor

2 Answers

Monitor goes blank less than a second after turning on.

I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. What's up? mine goes blank after about ten seconds but leaves the power button in green. when you push the power button to off then on again, the screen comes back to life only to go blank again in about ten seconds and on and on. pls help me. tnx!

Posted by on

  • jsw1864 Jan 13, 2009


    1. when i turn my computer on the windows will show up then it flashes bios then screen goes black an says mode note detected.

  • Anonymous Jan 23, 2009

    I have that same monitor and had the exact same thing happen. I took it to a repair shop and it's the power supply.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have one an opened the unit. the power supply has an obvious burn mark on it. Looking FOr a replacement part to fix for less that $50

Posted on Feb 20, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

YOU NEED TO HAVE THE INVERTER BOARD REPLACED.
YOU CAN USUALLY FIN THEM ON E BAY OR YOU WILL HAVE TO TAKE IT IN IF YOU DON'T FEEL COMFORTABLE REPLACING IT YOURSELF.

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor goes blank after 2-3 seconds


could be hardware failure but i would try buttons on front of monitor first. notice, usually green led on monitor is green, if it goes to amber, you are loosing sync pulse.

Aug 20, 2009 | Computer Monitors

1 Answer

Monitor goes blank less than a second after turning on.


Sounds like either there is a bad connection from the computer to the monitor, or the monitor has a faulty power regulator, causing the monitor to overheat prematurely, and shut off.

Feb 21, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Screen Goes Blank


Ive seen this on other monitors. Look for a 1 and 2. Some monitors do NOT auto detect a signal, and this one might not. Look for a way to set the monitor from Digital input to VGA input. Try that and see.

Jul 21, 2009 | Dell E173FP 17" LCD Monitor

1 Answer

Screen comes up for about 10 seconds, then goes blank


Hello Robert,

You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of he monitor. If you are good at electronics repair/soldering you can usually fix he problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htm You can take the back cover off your monitor and look for the bad parts, replace any that look like the pictues and your monitor should work fine. The capacitors do need to be installed with the correct + and - connections, note the stripe on the old one and insert the new one the same way. If you don't want to try the repair yourself we offer a repair service for $35 plus shipping. I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
Over 21 years of computer and printer support/repair

Jun 19, 2009 | LG Flatron L1750S 17" LCD Monitor

1 Answer

Screen goes blank within 1 second of being turned on


Bad capcitor in the psu would cause this to squel and even pop so have it looked at you be glad you did.

May 23, 2009 | ViewSonic VA720 17" LCD Flat Panel Monitor

1 Answer

Monitor is blank/dimension 2400


If you put a spare monitor on your computer and everything is fine I'd say it has an electronic problem. If the screen is still blank I would look at the video card or PC itself as the problem. Just for fun check the video cable for bent or missing pins.

Mar 23, 2009 | Computer Monitors

2 Answers

Monitor goes blank less than a second after turning on.


there is an hardware issue in your lcd it needs to change one of the capaciter please take it to a lcd technician
thanks

Jan 24, 2009 | Acer AL1715 17" LCD Monitor

1 Answer

Monitor goes blank less than a second after turning on.


the moniter may be having  some technical errors   maybe the IC's has got corrupt 

you need to call the seller of the moniter

Sep 06, 2008 | BenQ FP71G 17" LCD Monitor

2 Answers

Monitor goes blank less than a second after turning on.


Beautiful screen, lasts about for a few minutes, goes black. Power button still green. If I turn it off, and then back on, it works again for a while. Any ideas?

May 11, 2008 | Mag Innovision LT982s 19" Flat Panel LCD...

1 Answer

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. What's up?
I got my rosewill flatscreen as a hand me down from my father. I've had it for several years now. Was working fine until a month ago. When I turn the computer on the screen goes black after 1/4 of a saecond. I have to turn it off and on anywhere from 10 to 20 times before it stays on. I have checked all plugs to the computer and outlets. I have absolutely no idea whats causing this.

Dec 28, 2007 | Rosewill R700J 17" Flat Panel LCD Monitor

Not finding what you are looking for?
Proview PL926WBi 19" LCD Monitor Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Computer Monitors Experts

Diego Zenizo
Diego Zenizo

Level 1 Expert

22 Answers

Brad Brown

Level 3 Expert

13530 Answers

Terry Allen
Terry Allen

Level 3 Expert

680 Answers

Are you a Proview Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...