Question about Maytag HYE3658AY Electric Dryer

1 Answer

Dryer has no power.  i have reset the breaker and made sure the door is shut

Posted by on

  • ashbcoy Jan 12, 2009

    I have the same problem. I checked the breaker and it was ok, but the dryer will not come on. Where is the fuse located at on the dryer? Can anyone help! Thank you

  • Anonymous Jan 30, 2009

    my kenmore dryer has no power. it just stopped after finishing a load. no problems before it just quit.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I just cleaned my kenmore heavy duty dryer out. to like new. IT's a 2004 model.

I didn't see any fuses. I did see several sensors in there. One even looked like an optic one, pointed at the heating coil. I just cleaned them all off and vacuumed it all out.

I got a pretty good grasp of electronics, and I'd have to say, unless you are good with a volt meter and can decipher the technical spec sheet in the dryer, you should let a pro tackle trying to find out which sensor is out and replace it.

At the very least, call and get a few quick estimates.. it might not be as expensive as you think, for an hours service time.

Posted on Feb 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG electric dryer is not working


Reset your electric breakers and make sure the door switch is working. If not sure on switch after resetting breaker turn dryer on and with open door press the door switch in .caution keeps hands from inside in case it starts to work It also could be a Senser inside of dryer that goes off if vent is plugged with debri

May 27, 2014 | LG DLE2512W Electric Dryer

1 Answer

My amane dryer won't come on


Make sure the dryer is plugged into the outlet.
Make sure the dryer door is completely shut
Make sure the breaker has been tripped ( look at your electrical panel )
After checking all of those try it again.
If no luck pull the power cord out of the outlet
remove the front cover and check the door limit switch. should be a normal closed switch meaning that the switch will make continuity when it is depressed. if the switch is good I'm thinking the motor has failed. Mine did this and I replaced the motor and it's been running every since.

Jan 22, 2014 | Amana DLE330RAW Electric Dryer

1 Answer

Whirlpool dryer LER7646E02 will not turn on


Could be something as simple as a broken belt or door switch is broken. Open top and check if the belt is still in tact. If yes, then check door switch to see if electrically closing when door is shut (check resistance with power off).

Jan 11, 2014 | Whirlpool Dryers

1 Answer

How do I read the owners manual for model FGRB6600FSO


Instructions Operating Problems
  • 1 Check your dryer's power supply. Reset any flipped breakers, and replace any blown fuses.
  • 2 Open the door, shut it and press "Start" to be sure an open door isn't hindering the dryer's operation.

  • 3 Turn the dryer's control dial beyond "Off," into a cycle selection, before starting it.
  • 4 Check the gas supply valve. An opened valve will appear parallel to the line. If it is perpendicular, turn it to open it.

Jan 15, 2013 | Frigidaire Electric Dryer

1 Answer

I opened my fridge to get something out, shut the door and EVERYTHING WENT OUT??? No lights, no nothing??? I tripped the breaker and checked the cord etc... Nothing????


Make sure your getting power at the outlet by pluging in somthing like a hair dryer. If your getting power at your outlet then you probably have a controlboard problem.

If you don't have power then first look for GFI RESET in the kitchen. or fuse box.

Aug 11, 2010 | LG LFC21760 Bottom Freezer French Door...

1 Answer

Won't turn on


CHECK THE FOLLOWING----


1. No power to the dryer
Make sure there's power getting to the dryer. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for power with a voltmeter or by plugging something else in.

2. Door switch / Door switch actuator lever
The dryer would not start with a broken door switch. Replace the door switch if found defective.

Most dryers have a door switch actuator lever - when you close a dryer door, it presses against the lever, which actuates the door switch. If the lever is broken, the switch would not activate and the dryer would not start. Replace the lever, if broken.

Note: Door switch actuator lever usually comes with the door switch assembly and it is recommended to get the whole assembly since there is almost no price difference between the door switch assembly and just the lever. Check your model for more details.

3. Thermal fuse
Most dryers have a thermal fuse, which burns out when the dryer overheats, in which case the dryer will either not run at all or stop heating. The fuse is usually located on the vent duct, inside the dryer. A blown fuse will show no continuity when measured with a meter. Before replacing the fuse, make sure the blower wheel is not broken or clogged, and there is nothing blocking the venting.

Note: It is recommended by most dryer manufacturers to replace a hi-limit thermostat when replacing a thermal fuse.

4. Timer
Replace if defective (note: uncommon problem).

May 31, 2009 | Dryers

1 Answer

Kenmore 110 66862501 won't start


Do you mean you checked the outlet and breaker and that wasn't the problem, or you have no power there? I can't imagine anything the servicer did that would have required shutting off the power, only to unplug the dryer. The door switch probably isn't working still and the machine won't run because it thinks the door is open. Call the servicer back to check. You should be covered by some kind of warranty for the repair parts and labor.

May 21, 2009 | Kenmore 70172 Gas Commercial Dryer

1 Answer

No power


check the door switch which will not let dryer run if it is not depressed. a lot of times the holder for the door switch breaks. look for switch bracket holder with door open depress button and see if you hear a click. probably switch holder is broke. remove with power shut off

Feb 05, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Whirl pool dryer LEC9000PW0 will not turn on


Has a household fuse blown or has a circuit breaker tripped?
There may be 2 household fuses or circuit breakers for the dryer. Make sure both fuses are intact and tight, or that both circuit breakers have not tripped. Replace the fuse(s) or reset the circuit breaker(s). If the problem continues, call an electrician.
Is the correct power supply available? (Electric dryers only)
Electric dryers require 240-volt power supply. Check with a qualified electrician.
Is the dryer door firmly closed?
Your dryer door may not be fully closed. It may look shut, but may not be latched. Push on the door to engage the latch or latches. Some models have an upper and lower latch. Both latches must be secure for the dryer to run.
Was the Start, Push to Start or Hold to Start button firmly pressed?
Large loads may require the Start, Push to Start, or Hold to Start button to be pressed and held for two to five seconds.
Is the Cycle Control knob set on a Sensor Dry or Timed Dry cycle? (on some models)
The Cycle Control knob must be set in a Automatic Dry or AccudryTM or Timed Dry cycle. The dryer will not start if set on the Wrinkle ShieldTM option.
Is Controls Locked status light on? (on some models)
Press and hold the Cycle Signal button for three seconds. This will turn off the Controls Locked feature.
Did you recently install a power supply cord on the dryer? (Electric dryers only)
The power supply cord may be incorrectly installed. If the power cord is incorrectly installed, the dryer may not start or heat. Review the Installation Instructions to check that the power supply cord is properly installed.

Dec 02, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Dryer shut off towels were not yet dry, turned dial to restart dryer acts as if it isn't getting power I closed door and pushed start button. Nothing! Checked breakers and power cord at outlet all checked...


Hello mdonettaYou said,
Dryer shut off towels were not yet dry, turned dial to restart dryer acts as if it isn't getting power I closed door and pushed start button. Nothing! Checked breakers and power cord at outlet all checked okay. Any ideas.

yes, try unplugging the power cord or turning off the breaker for 5 minutes. Either will due. Some times the system needs to be reset!
If this does not work there are internal fuses that can be replaced!

Let me know how it goes!
Huuum

Sep 19, 2008 | Dryers

Not finding what you are looking for?
Maytag HYE3658AY Electric Dryer Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...