Question about Canon PowerShot A470 Digital Camera
My camera just have one week of being purchased, yesterday i was taking photos and suddenly this message appeared and i did not find anything in the manual
SOURCE: drooped camer now lens stuck
These cameras are easily broken by dropping them. Try to free it by hitting it easy at first, not too hard, you don't want more damage to it? Option number two is to take it to a camera shop for repair estimate. They will try what I'm telling you and chage you a lot if it works.
Posted on May 27, 2009
Go to the menus and find the set to default option.
This should reset the menus and options to original.
Go to the menu section find a setting something like this... such as.. reset all to default or set to factory default or simply RESET.
Check to see if the pictures are saved to the card by taking a picture, then remove the card and play it back in either another camera or use a card reader to read the card.
If these tests shows that no picture was taken or it is all white, then the camera needs repair or has a ccd problem.
Another option is to call Canon Repair at the following page and use the 800 number for calling the repair department.
Canon has a trade-up or trade-in program which is a great way to get another camera at a good price. Canon will allow you to trade in your camera for a reasonable price against a refurbished camera plus a cost which is reasonable. A refurbished camera will come with everything it had when new, and will have been restored to original specifications.
Posted on Oct 27, 2009
I had this problem too, I think it's the shutter problem, it doesn't close
when a picture is taken, therefore, causing the over exposed photo...I've sent it back to canon, still waiting for the reply...
Kevin - Malaysia
Posted on Dec 10, 2009
This error occured when lens is prevented from properly extending or retracting.when pressure is applied to the lens or the area surrounding the lens while handling the camera. The error may also be displayed due External shock or liquid, sand & dirt etc. enters the camera.
Avoid applying pressure to the lens and surrounding area:
1) Do not touch Lens while shooting.
2) Make sure the camera is off before the camera is placed back in the case.
If you cannot clear the error code by turning the camera OFF and then ON again then your device need to be repaired.
Rating the solution is highly appriciated...Good Luck.
Posted on Mar 06, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 08, 2014 | Canon PowerShot A470 Digital Camera
Apr 15, 2011 | Canon PowerShot A470 Digital Camera
Aug 10, 2010 | Canon PowerShot A470 Digital Camera
Dec 06, 2009 | Canon PowerShot A470 Digital Camera
Jul 15, 2009 | Canon PowerShot A470 Digital Camera
Jun 04, 2009 | Canon PowerShot A470 Digital Camera
May 12, 2009 | Canon PowerShot A470 Digital Camera
525 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: