Question about Kenmore 43142 Front Load Washer

1 Answer

F33 Flashing Help - my Kenmore of 2 years old is flashing F33. Tried turning on and off and clearning out socks etc. Still wont work and with 5 children I am surrounded by dirty clothing. Can anyone help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The F33 error code indicates a pump drive system error. If the pump ohms out correctly & the harness is secure I recommend replacing the CCU (central control unit).
Please see the following image provided for instructions.

http://media.fotki.com/1_p,stwwfrggtqfbrbbxgtqsskgwtqkq,vi/wgtbwqwssxsbwkbdtfwxrbfbddwwf/1/1303472/5961857/image9159087223444281043img-or.jpg

Remember to disconnect power to the washer before attempting access.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F33 keeps flashing on the screen or F21


The F33 error code indicates a pump drive system error. If the pump ohms out correctly & the harness is secure I recommend replacing the CCU (central control unit).
Please see the following image provided for instructions.

CLICK HERE


Remember to disconnect power to the washer before attempting access.

Thanks for using FixYa&^%$

Feb 15, 2011 | Kenmore HE2 Plus Front Load Washer

1 Answer

F33 flashing during cycle I have a kenmore HE2


The F33 error code indicates a pump drive system error. If the pump ohms out correctly & the harness is secure I recommend replacing the CCU (central control unit).
Please see the following image provided for instructions.

CLICK HERE

Remember to disconnect power to the washer before attempting access.

Thanks for using FixYa

Feb 13, 2011 | Kenmore HE2 Plus Front Load Washer

1 Answer

I have a hotpoint wd420. the door light is flashing the wash light is on constant and the machine wont work anyone any solutions please!!


My WD 420 packed up, after watching the blogs I did:1) remove filter - found 2 quid, a thong, a pop sock, a christmas cracker toy and a load of gunge. 2) removed the motor - brushes worn to nothing - replaced them.
Washer running as new. 6 years old, 2 house moves - not bad reliability. Nearly gave up and bought a new machine!!

Nov 11, 2010 | Hotpoint Ariston Aquarius WD420 Front Load...

2 Answers

Washing machine flashing FH and beeping


This should take 30 minutes: Remove the panel that is located below the front door, there are 3 small screws located at the bottom that hold this... you will see the water pump, which has a access screw plug. Unscrew this, its like a filter, you may see stuff, like coins, socks, etc, remove and clean out, then put
everything back... this should fix the issue.

May 31, 2010 | Kenmore Washing Machines

3 Answers

I have a he2 kenmore front end loader washing machine...it stops mid load and flashes F20


Something is in your pump trap, easy fix. pop open the bottom panel by removing the three screws under it. requires a torx bit or a nut driver. if you can tilt the washer back so the front legs are a foot or 2 off the ground, it will make this a lot easier. once open you will see a twist off cap. before you remove this be prepared for the residual water to eject out when you open it. these can not get all the water out so there is always some, tilting it back will minimise this or putting hose clamps on the pump to tub hose can help but not nesesarry. twist it out and clean it out, also stick your fing into the two holes where the trap is located to see if any coins have gotten stuck. once clean, make sure you line up the trap arrow with the base. then button it back up, good luck

Dec 04, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Whirlpool Duet stopped during wash cycle.


UNPLUG THE WASHER AND TAKE THE 3 SCREWS THAT ARE ON THE BACK OF THE WASHER OUT AND REMOVE THE TOP PANEL OF THE WASHER. CAREFULLY UNPLUG AND REPLUG IN THE WIRING SO THAT U WONT GET THEM MIXED UP. DO ALL OF THEM, FIRMLY BUT GENTLY. THEN HOLD IN THE SIGNAL CYLCE LITE FOR 3 SECONDS. TRY TO RUN A LOAD AND SEE IF THAT WORKS. IT DID FOR US, SO FAR SO GOOD. GOOD LUCK!!

May 30, 2009 | Whirlpool Washing Machines

1 Answer

Kenmore elite he3t model 4596640 year 2005 f33 code


The F33 error code indicates a pump drive system error. If the pump ohms out correctly & the harness is secure I recommend replacing the CCU (central control unit).
Please see the following image provided for instructions.

http://media.fotki.com/1_p,stwwfrggtqfbrbbxgtqsskgwtqkq,vi/wgtbwqwssxsbwkbdtfwxrbfbddwwf/1/1303472/5961857/image9159087223444281043img-or.jpg

Remember to disconnect power to the washer before attempting access.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 05, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Having freed drum of sock in mechanism the control panel is flashing and needs resetting before I can re-programme for a new wash. Is there a re-set procedure?


Hello bmn1
Welcome

You said, Having freed drum of sock in mechanism the control panel is flashing and needs resetting before I can re-pro gramme for a new wash.
Is there a re-set procedure?


Lets try and reset the system,

1.Unplug the washer and wait 5 minutes, if you can not reach the plug turn off the breaker
for 5 minutes instead.
2.Then restart washer like rebooting your computer when its acting strange!
If it corrects the problem GREAT!!! WE WIN!


If not only a trained laundry tech may have to make the electronic diagnoses.
How old is the washer?


You will be fine
Bless You
Please remember to leave a rating

Oct 15, 2008 | Zanussi Washing Machines

2 Answers

Kenmore HE2 frontload washing machine


unplug the washer, take off the bottom kick plate there should be a pump on the right hand side. with sort of a plug that screw in looks sort of like a pvc pipe. Get a bucket, and place it under the opening, unscrew the opening. there is propably something stuck in there. mine likes to eat socks. empty it out and screw it back in. plug the machine back in and start it up it should work fine. I now put all of my socks is a mesh bag, and check pockets!!!!!!!!!!!!!!!!!

Jan 07, 2008 | Kenmore 43142 Front Load Washer

Not finding what you are looking for?
Kenmore 43142 Front Load Washer Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...