Question about Lexmark Printers & Copiers

1 Answer

New computer printer does not install - Lexmark Printers & Copiers

Posted by on

  • bridge9942 Jan 22, 2009

    when i put the disk that came with my printer it can not be read and i do not know how to manually set up my printer. it is a wireless one and it can not locate the printer. my computer is about five months old?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 327 Answers

Best site for Lexmark printer drivers
http://www.printcountry.com/drivers/LEXMARK_DRIVERS.asp

for how to install a printer in a computer
How to load a printer on a pc step by step instructions
http://freepctech.com/pc/xp/xp00168.shtml
How to load a printer on a pc step by step instructions
http://kb.iu.edu/data/aksl.html
Installing a printer on a Windows 95/98 network
INSTALL THE PRINTER on a PC
ENABLE PRINTER SHARING
MARK the NEW PRINTER as a "Sharable" Printer
INSTALL THE PRINTER ON THE OTHER PCs
Troubleshooting Windows 95/98 networking problems

http://www.mcgill.ca/ncs/products/soho/networking/printer/

How to install a printer driver locally for a remote printer in Windows XP/ Windows 2000-
http://support.microsoft.com/kb/282842

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Izaakzakei cant get my printer connected to my laptop i have downloaded the driver but its still not working


Hello,

You need to install the softeware first with the printer unplugged from the computer!

Insert your softeware disk and restart your computer, if computer doesn't detect new software when it is rebooting....than go into your control panel...click on install new software.

Once that is installed, you'll need to restart again with the printer hooked up this time.

Again, if computer doesn't detect new hardware, go into control panel, click on install new printer, you will have to select the make and model, or if you have the disk, select have disk, then next...you computer should install the hardware for you printer.

After installed, restart again...to see if if new software and hardware is detected and is being installed.

Go to your printers, from your control panel, and see if your printer is there, if not select, add new printer, it will take you through the process from there. Make sure you select this to be your default printer!

Happy printing!

Sep 13, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

I need help installing my printer to my new computer???? I have a hp psc 2175 all-in-one series printer and i am trying to install it to a new dell computer


Ok try this. first install the cd software of your printer to your new pc..then secondly when the installation software ask you to connect your printer connect the printer to the USB port of your computer i recommend to plug it the USB port at the back of your PC(make sure your printer is on so that your pc may detect it)..Then third follow the instruction of the installation software until finish..Hope it will help you

Jul 13, 2011 | Printers & Copiers

1 Answer

How to install versajette M400 printer


Hello,

To install your printer, connect the printer to the computer or laptop usint the cable that links it up.

The computer would see it as a new hardware, you can install it from the bar that shows up from the tab side, or you can also go to the computers control panel, select add new hardware, then a list of new hardware found will appear, then you select the versajette m400 printer, and install the drivers.

After doing this, you can now start printing with your printer.

Take care

Jul 10, 2010 | G7 Productivity Systems VersaJette M400...

1 Answer

I install Kodak ESP 3250 all N one print computer wont connect Is


we to were unadle to install such a printer ,customer services usless .they blamed or computer & os our's must be a different copy of windows 7 to everybody elses!!

Apr 10, 2010 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Installed a new computer, can not get my all in ne lexmark printer to work


first is you have to make sure your new lexmark printer is connected properly to your New Computer, and grab some Disc Utility of your new lexmark printer and install it, but before you install just to make sure your new printer is turn-off.
Then follow the instruction & procedure which appear on your screen, install all necessary programs and drivers to make sure your printer is working. After that restart your computer & turn-on your new lexmark printer. Good luck!

Jul 22, 2009 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

I need to install my printer to my new computer. I was told it was better to do it online


installing a printer to your new computer is a relatively simple process. If you are "networking" your printer, simply go to your old computer, right click the printer in printers and faxes, and "share" it to the network. then come to the new computer and find the share name when installing the printer from the network.

if you're installing it locally to the new computer, i would advise using your factory installation CD for the drivers, but if you do not have it you can go to the manufacturer's website and look for the appropriate drivers for your printer and operating system. download them, hook up the printer like your normally would (USB or Parallel cable) and install the drivers. Most manufacturer programs will "install" the printer on your system automatically from there, however some will require you to go to the printers and faxes module of windows and "add" a printer (use the drivers you just installed when it asks for them)

Jul 01, 2008 | Lexmark Printers & Copiers

1 Answer

Printer not configurating with computer


Two problem that occur. You plugged in the new printer before installing the software. If you have XP it will go and install it with it's drivers. Your printer wants it's own drivers. A second problem I've seen is having too many devices plugged into USB ports. If the software was installed properly, remove non-needed USB devices and re-boot the computer. If the printer works, look into purchasing a "POWERED" USB hub. They cost between $5-$25

Mar 29, 2007 | Lexmark X4270 All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...