Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Loud noise in slow down spin mode.

When in the slow down spin mode the tub is rising and dropping on every revolution making an awful loud sound. This is a Kenmore 600 series washer LESS THAN 2 YEARS OLD! Local appliance repair man for over thirty years has never seen this type of problem, thinks something broke in the "transmission". Can you Help? I have dirty laundry everywhere!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 179 Answers

When it is in high spin then you stop the washer it makes a thumping noise until the basket stops sort of like a flat tire sounds to me like you need a drive block

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a top load fridgidaire washer model fwsc445rfs0. During the wash cycle it makes a high pitched scraping noise.... Struggles also while it winds down before rinse. Bearing maybe?


How To Fix A Washing Machine Making Noise During The ...

removeandreplace.com/.../washing-machine-making-noise-during-the-sp...
Jul 27, 2015 - Agitator directional cogs aka "agitator dogs" (top load washers) ... If you hear a rubbing sound or the drum spins uneven, then the ... A washer making a loud noise during spin cycle can also be caused ... The clutch in a washing machine connects the inner wash tub to the ..... May 8, 2015; High Water Bill?

Dishwasher Making Loud Grinding Noise During Wash Cycle

removeandreplace.com/.../dishwasher-making-loud-grinding-noise-durin...
Apr 11, 2014 - Dishwasher Making Loud Grinding Noise During Wash Cycle ... GE, Whirlpool, Frigidaire, KitchenAid, Maytag, Kenmore, and LG) this is a .... Our Amana dishwasher is making a loud, high-pitched squealing noise throughout the wash ....Out Of A Washing Machine - Top Load & Front Load September 30, ...

All comments on Loud dishwasher Frigidaire Gallery mode ...

https://www.youtube.com/all_comments?v=v-arYb20kOk


Dec 03, 2015 | Washing Machines

1 Answer

How do i repair a lg washer that makes a grinding noise when slowing down from spin cycle


It sounds as if the tub bearing on your machine is faulty. To replace this bearing one needs to basically strip down the entire machine.
Not a job for a novice.

Sep 06, 2014 | LG WM2501HWA 4.2 cu. ft. Front Load Steam...

1 Answer

Entering test mode


1) try to go the instr. manual and go to the section troubleshooting they explain this . However if you do not have it download from .
www.manualslib.com
see this causes and fix it.God bless you
Tub Bearing If the washer is making a loud noise the tub bearing might be worn out, this is a common problem. The bearing can be replaced.
Tub Seal and Bearing Kit If the washer is making a loud noise the tub seal and bearing kit may need to be replaced. This is a common problem and the parts are relatively easy to replace.

Rear Drum with Bearing If the washer is making a loud noise the rear drum with bearing might need to be replace. On this washer the bearing is not sold separately, the entire rear drum will have to be replaced. This is a very involved repair and will require disassembling most of the washer. However, the problem is going to get worse very quickly and so either the drum and bearing will need to be replaced or the washing machine.

Bearing If the washer is making a loud noise the bearing might be worn out. As bearings wear out from friction they gradually get worse and worse until they fail. In the meantime they get louder. If the noise primarily happens during the spin cycle the bearing is likely the problem.

Drive Pulley If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.

Pulley If the washer is making a loud noise the pump may be worn out, or something might be caught in it. Remove the pump and inspect it for debris. If it is clear and the blades spin freely the problem might be somewhere else.
U-Joint Kit If the washer is making a loud noise the U-Joint may have failed. This is the primary drive mechanism for the agitation motion in this washer. Although this is not a very difficult repair for a DIY'er with some experience, the part is expensive and so it may be worth considering a new
Motor Coupling If the washer is making a loud noise the motor coupling might have failed. The motor coupling connects the motor to the washer transmission. It is designed to fail if the washer is overloaded in order to protect both the motor and transmission.

Clutch Assembly If the washer is making a loud noise in the spin cycle, the clutch assembly might be worn out. The clutch assembly makes the connection between the transmission and the inner tub. It is designed to allow the tub to get up to the proper spin speed gradually. As the clutch wears out it may become loud during spin or just after the spin cycle finishes. The clutch is not repairable, if it is loud or not working properly it will need to be replaced.

Drive Belt If the washer is making a loud noise the drive belt might be defective. Over time the drive belt will dry out and start cracking, eventually a piece of the belt can break off resulting in a loud noise whenever the motor is running.
Transmission If the washer is making a loud noise the transmission might be worn out or defective. There are many other more likely causes for noise from a washer. If the noise turns out to be caused by the
Drain Pump If the washer is making a loud noise the drain pump might be going bad or might have something caught in it. Remove the drain pump from the washer and inspect it carefully. Look for anything that might be caught in it, a piece of wire, plastic, etc. If nothing is wrong with the pump, but it's still noisy it will have to be replaced.

Drive Motor If the washer is making a loud noise the drive motor bearings may have worn out. Washer motors are normally almost silent when they run. If the motor is run without a belt hooked up to it and it's loud it will have to be replaced.

Water Inlet Valve If the washer is noisy or loud, particularly when the washer is filling, the water inlet valve is at fault. Replace it.
transmission it may have to be replaced.



9_30_2012_11_13_28_pm.gif

Sep 30, 2012 | Washing Machines

2 Answers

The machine makes a very loud noise when the high speed mode of the spin cycle, otherwise works fine and no error codes. I have looked through some postings and have seen "outer tub bearing" listed. But it...


Derek,

What are the 1st two digits of the machine s/n? You have a FAV6800A or FAV9800A correct?

Have you ever had unbalance issues with dC orUC error codes?

Have you ever had the Clutch Pulley replaced?

If you machine has the Clutch pulley with the Upper One-Way Roller clutch bearing ring it will use off the shelf bearings of this type 6207-2RS

If you open the lid and Spin the Wash basket by hand do you bearing noise/roughness sound. Will the wash basket coast several revolutions and coast down to a gentle stop?

See this post Issues with Outer Tub Bearings
I have links to a owner that changed out the bearings on a Series 15 that did not use the Upper One-Way Roller Clutch bearing ring. He still used 6207-2RS bearings with some shims to take up bearing thickness issue. Everyone with I believe a Series 12 or above will have to go this route for Outer Tub Bearing replacement… It’s a cost effective job for a DIY’er if you can tolerate some down time. I ran into some issues replacing them on a series q0 with extremely corroded Spinner Bolts but other have changed them out with no issues….…D*ick

Aug 13, 2010 | Maytag Neptune FAV6800AW Top Load Washer

3 Answers

When entering spin cycle, making a loud noise. I


Check your belt it may be lose. A lose belt will cause a squealing noise and the machine spin slower or take time to come up to full speed

Oct 09, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Tub makes loud thumping noise when spinning


Good morning! It's common to hear a loud thumping noise during spinning because the load (clothes) are not properly place in the tub. Please try to put the load in order & compress it down. best regards.

May 02, 2009 | Washing Machines

1 Answer

Washer machine makes noise each time the tub stops spinning


theirs a brake that slows the tub down .Ive fixed 2 thousand off these washers and its not a normal problem.as a repair man i would remove traine,inspect clutch,brake and spanner nut and drive block area

Dec 31, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

LOUD NOISE IN SPIN CYCLE


you have a bad tub seal asm. remove agitator, spin basket and tub asm. remove seal and install new one. good luck

Dec 15, 2008 | Maytag Performa PAV2200

2 Answers

Loud cliunking noise in beginning of spin then won't spin


get a flashlight and see if a foreign object has fallen down through one of the tub holes and is jamming the tub you have to look real close

Jan 11, 2008 | GE WJSE3110A Top Load Washer

1 Answer

Slow to spin and making a loud noise.


Control boards don't growl, the fry out and die. Sounds like a drive train problem to me. If it's a front load machine, the spindle/bearing assy. has gone to washer heaven. If it's a top load machine... could be the transmission, brake/clutch assy. or the tub bearings. In either case, if it's less than 5 years old, the drive system will be warrantied through the manufacturer. If you could provide a make and model number, I could narrow this down to a fine point.

Dec 15, 2006 | Kenmore 43142 Front Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...