Question about Polaroid FLM-3701 Television

Open Question

Element FLX-3202 LVDS cable replacement

I need to replace the LVDS cable and based on my research this TV was either manufactured by Polaroid or at the very least contains Polaroid components. Apparently there are two types of Polaroid LVDS cables, with the difference being the flat connector end. One has a black connector, the other has a white connector. I purchased a 631-030-gf321xah cable but it has the black connector which will not work on my board. I need the cable with a white connector. I'm trying to locate a part number for the LVDS cable with the white connector. Any help is greatly appreciated.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
a1electronic
  • 30 Answers

SOURCE: Are the Polaroid FLM-3232 and the Element FLX-3202

not sure if there the same but the boards inside may be.

This sounds like the problem most LCD tv's get with swelled up capacitors in the power supply board. look for circular cylinder shaped parts rapped in plastic with writting on the sides, and metal tops, if the top is rounded over, not flat, it is bad. replace them.

Posted on Jul 22, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Element FLX 3202 speaker


It can be replaced. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Jan 14, 2015 | Element Electronics Televison & Video

1 Answer

My lcd element FLX-3711B dont turn on.. I plug the cord cable and only flashing front red light? Whats the problem?


Hello,

The Element FLX-3711b TV is the same unit as several model of Polaroid and Visco TVs. They are all made by the same company just labeled fr different brands. The flashing power light is a very common problem and is caused by a failure of the power supply board. The capacitors on the board short out and this causes the board to not power up correctly. Here is a link to a repair guide for the Visco TV that is the same as the Element FLX-3711B so the information will be the same for both units. The repair guide shows the parts that will need to be replaced on the power supply board to rebuild it.

http://www.ccl-la.com/blog/index.php/visco-vsc-37v1-no-picture-lets-repair-it/

I hope this helps you out.

BuddyMc

Jul 10, 2012 | Televison & Video

1 Answer

My screeen has gone white on my tv how do i fix it on my element flx-2210 tv


Hello,

White screen only / no picture is a sure sign of a failure in the power supply board. Your TV is getting power to the back lights but the control board voltages are not getting through so it is not displaying the picture right. This is an easy repair to do, you will just need to replace the filter capacitors on the power supply board. This Element model is actually made by Funai and is the same as the Polaroid FLX-01911c TV. Here is a repair guide for that model that will show you what needs to be replaced to get your TV back up and running again.


http://www.ccl-la.com/blog/index.php/repairing-a-polaroid-tla-01911c-with-a-bad-power-supply/


I hope this helps you out.
BuddyMc

Jan 30, 2011 | Element Electronics FLX-2210 22 in. LCD...

1 Answer

Element Flx-3202 that works about 20 min. then the screen gose black, and the sound stays on.


It can be that the backlight inverter board has gone out or it is not getting the power from the main power supply.

Nov 04, 2009 | Element ELC-HS321 32 in. LCD TV

4 Answers

Are the Polaroid FLM-3232 and the Element FLX-3202


not sure if there the same but the boards inside may be.

This sounds like the problem most LCD tv's get with swelled up capacitors in the power supply board. look for circular cylinder shaped parts rapped in plastic with writting on the sides, and metal tops, if the top is rounded over, not flat, it is bad. replace them.

Jul 22, 2009 | Polaroid FLM-3232 Television

1 Answer

I need a Service/Repair manual so I can replace the "control box"


http://www.audiolabga.com/pdf/FLM3232.pdf or you can buy one on EBAY....hahaha

Apr 21, 2009 | Televison & Video

1 Answer

Element FLX 3202 no power


This was the same thing that happened to me. When I took it apart and checked the power supply the capacitor (largest on the board) was blown. I called Element Electronics, which turned out to be Polaroid, and they sold me the entire control box assembly for appx $115 with a $100 core deposit to ship my old assembly back. My core deposit was credited back to my account within 2-weeks. BTW, when mine went out I had no power light on at all. Lastly, If you have questions about doing this yourself let me know, while I'm no electrical engineer, I did a ton of research trying to solve the problem.

Jan 19, 2009 | Polaroid FLM-3701 Television

13 Answers

Element tv remote code flx-2210


For the Direct White remote it is 10178

Jan 18, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74887 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...