Question about Hitachi 61SDX01B 61" Rear Projection Television

1 Answer

61 Hitachi Ultra Vision has double image

My rear projection 61 Hitachi Ultravision is displaying double image. Its about 7 years old. Magic foucus dosen't help. Any ideas?

I have a similar problem woth the red green convergence

The model # on back of set is 61SBXO1B (as versus the 61SDXO1B)

I was hopeful that the instructions for the manual convergence would help. Unfortunately I can't seem to get to the manual convergence mode.

I pressed the MAGIC FOCUS button then pressed it again until it said STOP. I then pressed the INFO button on my remote (model CLU-575ts1) but got no results it just went back to the regular picture whether or not I pressed INFO. I don't see a button marked STATUS on my remote. Is there another way to get to the manual convergence mode. The Red and Green images are separated by about 3 inches in the middle of the screen. The image are almost align directly at the viewer's right edge of the screen

Posted by on

  • Anonymous Jan 30, 2009

    i have a hitachi projection tv about 8 years old model 43fdx01b



    has double vision on top to middle of screen red and green what do you think is problem

  • Anonymous Mar 18, 2009

    I HAVE A VRY SIMILAR PROBLEM. WHEN I PUSH THE MAGIC FOCUS BUTTON, IT STARTS THE FOCUS THING THEN STOPS AND A NUMBER 3 LIGHTS UP IN THE CORNER. IF I SHOULD REPLACE THOSE ITEMS LISTED BEFORE, HOW DO I DO IT, AND WHERE DO I FIND THEM

    THANKS

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 5,138 Answers

Replace both of your STKs big black ics If they are STK392-110s upgrade to 180s better ics Electronix has them call 1-800-223-3205

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much is a sale price Hitachi Ultra Vision DX Series 61UDX10B - 61" rear projection


try here -> http://www.beststuff.com/audiovideo/hitachi-introduces-new-hdtv-monitors-and-conventional-sets.html

Mar 25, 2011 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

61sdx01b The blue image is 3 inches to the right of the red/green. Magic foucus does not correct problem. When it gets to the blue it gets a bit wavie. If I go to the center adj mode by holding down the...


You have a Convergence circuit failure. The Convergence ICs probably need to be replaced. It should be done by a professional due to the adjustments that may need to be done in the factory mode after replacing the ICs.
Hope this helps,
Skyassoc

Jul 16, 2009 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Rear projection HD Hitachi Ultravision always has greenish tint


This is what you're going to do, Turn on the Tv and go to the service manual, if the green tint is still there, you have a defective dmd board, but if it's no there, then you have an issue with your video board

Jul 09, 2009 | Hitachi Televison & Video

1 Answer

My hitachi ultra vision television is giving a double picture


This is a common problem with rear projection TVs. It will require pulling the convergence board out of your set and replacing two large ICs and several 1 watt resistors. It can be fixed no other way.

May 17, 2009 | Hitachi ULTRAVISION L42V651 42 in. LCD...

1 Answer

Double vision two picture


conversion chip is blown do a google search on "replace conversion chip"

May 06, 2009 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Hitachi 42 inch ultra vision has double image


it is just a convergence problem which makes the image look doubled.it can be repaired by any good local tv technician for approx 75 to 80 dollars.nothing much to worry.

Dec 01, 2008 | Hitachi 60V500 60" Rear Projection...

1 Answer

61 Hitachi Ultra Vision has double image


you will need to replace both convergence ICs they are STK392-110 you will also need six resistors (2) 2.2 ohm 1watt
(2) 1.5 ohm 1watt, (1) 3.3 ohm 1watt and (1) 1.8 ohm 1watt.
You can get replacemnet ICs and resistors at te following link with free instalation instructions. Here is the link.
http://servicemanuals.vstore.ca/

Jul 17, 2008 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Double image 6 yr old unit


Have you let set warm and then tried Magic Focus? Maybe after 15min.

Nov 25, 2007 | Hitachi 61UWX10B 61" Rear Projection...

Not finding what you are looking for?
Hitachi 61SDX01B 61" Rear Projection Television Logo

885 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2307 Answers

The Knight
The Knight

Level 3 Expert

73153 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...