Question about Brother DCP-8040 Copier

2 Answers

To get reset code for errors on brother dcp 8040

Please how can i reset error message E6 on brother dcp 8040 printer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

6E
Heater temperature does not go up enough.
(Slower temperature rise rate than 2°C/5
sec. is detected.)

To cancel the trouble status follows these steps:
STEP1 .Press MENU *,2,8,6,4
STEP2.The machine beeps for approx. one second and displays “MAINTENANCE" on the
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which
the machine is ready to accept entry from the keys.

STEP3.Now you are inside the simulation Press 01 to reset the trouble status.

STEP4.To exit the simulation press 99

Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine
exit from the maintenance mode, restoring it to the standby state.
Pressing the Stop button after entering only one digit restores the machine to the initial
stage of the maintenance mode.


If again 6E occurs try to check the halogen lamp or power supply PCB.Contact authorized technician to do this checking.







Posted on Feb 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do I reset after installing drum cartridge

Posted on Sep 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 48


There is a problem on the print head, Please Contact Brother Printer Experts Brother Printer Support

Feb 25, 2014 | Brother DCP 165C Compact Color Inkjet...

2 Answers

Error code 6a


the fuser will need to replace

May 30, 2011 | Brother DCP-8040 Copier

1 Answer

What model toner for the DCP 8040


Hello
The Brother DR-510 Compatible Printer Drum ( Brother DR510 ) is used for the Brother DCP 8040 Laser Toner Printer.
For more information visit http://www.priceless-inkjet.com/cartridges.BrotherDCP8040.html or
http://www.inkcarts.com/brother-dcp-8040.html
Hope this helps, if so do rate the solution

Jan 19, 2011 | Brother DCP-8040 Copier

3 Answers

DCP-165C Compact Colour Inkjet Multifunction Printer: in brother dcp 165 printer the error message clean...


brother dcp-165c printer unable to clean , see troubleshooting and routine maintenance chapter in User's guide

May 16, 2010 | Brother DCP 165C Compact Color Inkjet...

2 Answers

BROTHER DCP 8040 MULTIFUNCTION HAS AN ERROR MESSAGE: 7A. How do I fix it?


This error means that the Main motor is not synchronising with the reference clock.

This can be caused by several things...

  1. Could be a faulty motor.
  2. A faulty Engine Circuit Boaard.
  3. Fault on the Main PCB.
  4. A siezed Drum unit.
  5. Something seized up in the drive train.
Try to get it to start up with the Drum unit removed, if it does the initial rotations OK with no Drum unit installed, then try a new Drum unit.

Failing that, you will need to dismantle and inspect all the drive train and motor assemblies.

Good luck.

Dec 27, 2009 | Brother DCP-8040 Copier

1 Answer

Brother 8040 error 6e


For error code 6E:

This means the heater temperature isn't rising fast enough.
The heater should rise at 2°C every 5 seconds.

You should first reset the code to see if the problem is just an anomoly or a real problem with the heating circuit (the halogen lamp and/or the power supply PCB). If after resetting the code the error returns, have a technician or service center diagnose which is the culprit (or you could simply replace both yourself -- if that is affordable to you).

To reset the trouble status follows these steps:
1. Press MENU *,2,8,6,4
2. The machine beeps for approx. one second and displays “MAINTENANCE" on the LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine is ready to accept entry from the key pad.
3. Now you are inside the simulation Press 01 to reset the trouble status.
4. To exit the simulation press 99.

• Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine exit from the maintenance mode, restoring it to the standby state.
• Pressing the Stop button after entering only one digit restores the machine to the initial stage of the maintenance mode.

I hope this helps.

Aug 20, 2009 | Brother DCP-8040 Copier

1 Answer

Machine error 7a on brother mfc8640d


Same problem with mine! You can replace cheaper than repair!!!!!

Apr 28, 2009 | Brother DCP-8040 Copier

1 Answer

Unable to clean message in brother dcp-115c aio


I saw on this site codes for another MFC to clear memory and reset the cleaning unit count code to zero. It worked on two of my brother mfc 820cw units. The third mfc 5840cn had unable to print error message 46- nothing at Brother. they want you to take everything to a repair shop.they don't help at all. Then the error went to 4F when I tried toclear the memory.As Iunderstand that message- it means I have to replace the printer head. Have no clue where or what it is. But I can read a manual as well as anyone and follow directions to fix it! Can't be worse than it is now! Good luck

Jul 22, 2008 | Brother DCP 115C All-In-One InkJet Printer

Not finding what you are looking for?
Brother DCP-8040 Copier Logo

1,259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

John mullen

Level 2 Expert

245 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...