Question about Televison & Video

1 Answer

I OWN A MAGNAVOX TV MODEL # 51MP392H/17 SER # YA1A044022383 WITH A PLASTIC-LIKE COVER SCREEN ON THE FRONT. MY 3 YR OLD GRAND DAUGHTER DECIDED IT WOULD LOOK NICE WITH A BUMP IN THE MIDDLE OF IT WHICH CAUSED A SLOWLY CONTINIOUS CRACK ALMOST FROM THE TOP TO THE BOTTOM OF IT. I AM SICK ABOUT IT ! IS THERE STILL SUCH A PART AROUND ? I HAVE LOOKED HIGH & LOW FOR IT. PLEASE LET ME KNOW ASAP !

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

There are actually 2 screens that are still available. You will need to determine which one is damaged. These are:

1) Fresnel screen Part # 483538037091 Cost: $276.12
2) Lenticular screen Part # 483538037078 Cost: $198.00

Either can be purchased from tritronicsinc.com

Hope this helps,
Dan

Posted on Dec 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need an outer screen for my TV Magnavox(51MP392H/17). Where can I purchase another screen?


No,not changeable,the screen about 90% of the tv.The new screen part if tv companies sell it to u.The part and labors will exeed the new tv.Not worth repair if screen broken or damages with noticable when tv is on.

Jan 16, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a Philips Magnavox 51MP392H Rear Projection Television. The model #8P5434 C101 the serial # 13091835. While moving my television the screen for the front of the television flew out the back of my...


I might contact a local TV Service Shop, they usually keep ones that people don't wish to repair. They just might have a screen for you.
Blessings,
A/V Media Tech Guy.

Nov 25, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a Magnovox HD TV Progressive Scan (Floor Model) TV


You can find a replacement Philips/Magnavox fresnel screen, in stock, for this model (51MP392H/17) at this following link from a major parts distributor:

Philips / Magnavox 51MP392H Replacement Part Fresnel Screen

And here's a link for the Lenticular (middle) Screen, if needed:

Philips / Magnavox 51MP392H Replacement Part Lenticular Screen

Jan 16, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

No Picture No Sound Magnavox Rear Projection Television


51MP392H/17

Actually I have this TV and you need 2 Convergence IC's STK392-120's (120's and 150's will work) of course order 2 of the same type I'm using replacement 150's they allow for a little higher heat and were cheaper ALSO you need to replace the 12 resistors with 6.8 ohm metal film resistors, make sure they are metal film! don’t skimp out here I did and then they blew and fried my IC's and I had to replace everything again!

Great reference link that I posted pictures on, check out page 3
http://www.techlore.com/forum/thread/16736/Magnavox-51MP392H-17-51-quot--TV-has-double-vision/

Where I got all my parts that worked:
Suburban Electronics http://www.suburban-elect.com/

Manual Library you should find all you need here:
http://www.techlore.com/group/2/list_downloads



What you need:
(2) STK392-120 OR STK392-150 IC chips
(12) 6.8 Ohm Metal Film resistors
set of star screw drivers
15 watt pencil solder pencil, DO NOT use a high watt iron you will fry the surface mounted item.
good leaded solder, and flux


BTW if you don’t plan on trying this and are going to throw out the TV, I still need a IC convergence board for a 51MP392H/17 TV I'm fixing, I'm willing to pay S/H and buy your IC board that’s not been tampered with. Edwinkraus@hotmail.com

Nov 11, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

SMALL CRACK IN CENTER OF PROTECTIVE SCREEN SHIELD ON TV


according to service information on this model there is no protective screen inventoried

Aug 11, 2008 | Philips Magnavox 51MP392H Rear Projection...

3 Answers

Broken Screen on Philips Magnavox 51mp392h/17


your only chance will be find one at the local repair shops that may have saved some from sets they have scraped out, But they are hard to come by, and phillips have them as no longer available as do most manufactures shortly after that model lines goes out of production. Also try www.craigslist.org as they have chapters all over the world and often people give away dead sets, you may get lucky and find one.

Jun 25, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Removing circuit board


You can get Factory Service manuals from www.magnavoxhelp.com
Their manuals cover all projection TV models with Chasis # PTV835, PTV836, PTV840, PTV841, PTV842,PTV843, PTV844, PTV847,PTV853

Jun 16, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Magnavox 51mp392H/17 convergetnt problems


When I turn on my magnavox 51mp392h/17 the sound and picture works but there is a sizzling sound coming from inside of the tv I looked and the sound is coming from what looks like a coil it has 4 lines coming from it 3 of which go to the color projectors and one to what looks like a transformer. Can you help me out?

Jun 06, 2008 | Televison & Video

1 Answer

Tv has soun but no picture


51MP392H/17

Actually I have this TV and you need 2 Convergence IC's STK392-120's (120's and 150's will work) of course order 2 of the same type I'm using replacement 150's they allow for a little higher heat and were cheaper ALSO you need to replace the 12 resistors with 6.8 ohm metal film resistors, make sure they are metal film! don’t skimp out here I did and then they blew and fried my IC's and I had to replace everything again!

Great reference link that I posted
pictures on, check out page 3
http://www.techlore.com/forum/thread/16736/Magnavox-51MP392H-17-51-quot--TV-has-double-vision/

Where I got my parts that worked:
Suburban Electronics
http://www.suburban-elect.com/
Manual Library you should find all you need here:
http://www.techlore.com/group/2/list_downloads



What you need:
(2) STK392-120 OR STK392-150 IC
chips
(12) 6.8 Ohm Metal Film resistors
set of star screw drivers
15 watt pencil solder pencil, DO NOT use a high watt iron you will fry the surface mounted item.
good leaded solder, and flux


BTW if you don’t plan on trying this and are going to throw out the TV, I still need a IC convergence board for a 51MP392H/17 TV I'm fixing, I'm willing to pay S/H and buy your IC board that’s not been tampered with.
Edwinkraus@hotmail.com

Nov 05, 2007 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...