Spectel 700 conference bridge locking up

The root password default would be sf358kl or ad301bo

ClearOne

or Polycom

sell solutions for this

No it can't. One call at least must be dialed out to. Try using a conference bridge service if you want to have multiple parties call in to you. Then you and all guests only need to call bridge number which is usually toll free.

What is the error at console ?
Can you run "dcbps" when the bridge is running and let me know the output ?
Any alarms there on dsp or nic card ?

What is the spectel bcapi version ?
Is the api connection to the bridge is established ? Figure this out using dumpapi.

whats the actual process name for these pids ?
What is the error message at console ?
You can call me at +91 9972365752 for this.

is it an out bound / inbound avaya set ? being used only on soft phone or have hard phone capability too ?

This means the signin API is locked into the bridge.
You need to run "clearapi" to clear the hung api connectin slot.
Login with dcbguest , navigate to /usr/dcb/bin
use "dumpapi" to list the active signins along with api slot.
Then use "clearapi" to clear the respective api slot.
This will fix your problem without reinitializing the bridge.

have you verified the proper COR has been assigned to the station?

call you dial intra office extensions?

what is happening when you dial?

I've got a Spectel S700 brand new, never used. Just bought it as part of a corp buy-out. I'll try to call you tomorrow.
Pete Gammon
423-902-3344