Question about Canon C180II Black and White Copier

1 Answer

Blank copies About a month ago it started printing (or not in this case)blank copies. After calling a repair tech: who serviced it two months ago said its contacts were dirty. Last week it printed blanks and I took the toner out and moved everything inside that moved and it was fine. Today it is printing blanks again but nothing has brought it back to life yet. Is cleaning the contacts something I can do myself, or do I need to call service again? Any help would be appreciated!!

Posted by on

1 Answer

Re: Blank copies

This does not sound normal. if he serviced it just a month ago is it under warranty? it is possable that the charge roller is not making good contact. or the mag roller is not turning. have the tech do a better job of explaining what fixes it.make sure the dev unit is engageing fully.

Posted on Mar 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

My HP M2727nfs prints blank pages. Even demo page / reports are blank. NO errors on display. Paper gets warm, so fuser works. New cartridge doesn't help. Neither cold reset. What can this be?

This is a problem with either the formatter board or the dc controller, try doing an nv ram ( turn off the printer and hold down the right arrow and the cancel button, turn the printer back on and continue holding until you see permanent storage init). If this doesn't work call hp tech support 1800 334 5144 and ask for a case number. This printer has a service note which will cover the formatter for 2 years.

Sep 14, 2010 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Can the ink dry up. installed printer ink a couple of months ago but will not print now. printer prints blank pages.


yes ink can dry up.. big chance your ink have dried up, since you've installed them couple of months ago.. there's a possibility that the ink may have not dried up but the print head may clogged.. you can try running some maintenance like clean cartridge or print head test using Dell All inOne Solution center..
Hope this helps..

Sep 11, 2010 | Dell V313w AllInOne InkJet Printer

1 Answer

Blank copies

You need to turn off "Print Separator Page" from printer setup/properties. This usually fixes it.

Feb 11, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Printer goes through motions to copy doument but pages are blank

From Kodak's website: Question : Why are prints from my all-in-one printer blank? Answer : There may be multiple reasons why your prints are blank. To resolve this problem, we have an easy Step-by-Step Solutions and Repair tool.

Within the tool, select Print quality, then Blank prints.
Start @ this link:

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 07, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printer prints blank sheets

I would suggest resetting the printer options to Default first. If that doesn't do it then reinstalll the complete printer software and be sure to deleted all the old software. To delete files completely download <AppCleaner> it's free and is fantastic. Your last resort is to then call Epson Tech Support.

Apr 04, 2009 | Epson Stylus CX9400 Photo Printer

1 Answer

Canon i950 printing many blank strips/areas where text should be

I'm afraid it looks like the printhead is broken. A quick google sees them at about £80. Compare this to the price of a new model. I think 5-6 years insn't too bad though

Mar 23, 2009 | Canon i950 InkJet Photo Printer

1 Answer

The printer does not print when commanded

try and copy something and check if that comes out blank or not..........if it comes out fine then just follow the troubleshooting guide on .

Dec 23, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

HELP!! I'm soooo frustrated!

Ok. Vista could be the problem.

Try these drivers:

These are for Vista. Once you install them, update the firmware in your printer and follow the instruction on this link when you do it.

Jun 21, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

9 Answers

Kodak 5100 no black printing, light on colors

Had the same issue... No black ink. Called the # from "Solution #1" guest, 18004216699. Had to patiently go through all the basic trouble shooting stuff like calibration, print head clean, demo print, etc. Once I went through that, they issued me a new print head for free, no shipping charges or anything. Just did this today, but they say I should have the print head in 3 days.

For once, service worked like it should!

Jun 18, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

2 Answers

Printer acts like it's working then produces a blank page

Try to print first a self test page on the printer. Does it print a blank page also ? Do you have good or new ink cartridges in the printer ? Let me know.

Jul 31, 2007 | Dell A920 InkJet Printer

Not finding what you are looking for?
Canon C180II Black and White Copier Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

93738 Answers

old marine
old marine

Level 3 Expert

1293 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides